Nidec-SHIMPO test benches

... emergency stop button, eliminating lengthy training typical of similar test stands. With four modes of operation (manual, jog, single cycle, continuous) various single tests or repetitive tests ...

... adjustable speed provides for slow tests or quick cycle load testing. The simple keypad combined with the intuitive on screen operation guides the user through setting up each test. Users can perform ...

... and a Tensile Frame adapter kit which enables extended clearance for tensile tests. NIDEC-SHIMPO offers a variety of grips and fixtures to create the required set-up for your test parameters. The FGS-250W’s ...

... acceleration of the test specimen up to yield point of the material, • Strength test with over speed as part of quality assurance, • Burst tests of test specimen ...

BI 1 - 7 Over-speed test stands offer centrifugal stress testing to the point of bursting.The overspeed production features comprehensive safety concept providing maximum safety. The drive has regenerative brakes. Tests ...

1200 and 2000 bar test bench, provided with pneumo-hydraulic pump. Automatic door opening and luminous signal. Lighted internal chamber protected by a shock-proof testing window; oil protecting mesh ...

Test bench up to 1200 bar, small and easy to use, provided with a Ø 1/4'' gas quick coupling, analogue pressure gauge and pneumo-hydraulic pump. Pressure control and discharge, testing and liquid filling ...

Test bench up to 800 bar provided with PLC automatic control and pneumo-hydraulic multiplier. Ideal for testing palletised hose coils. This bench is provided with a big and sturdy chamber ...

Vertical Motorized Test Stand EMX series is advanced type in capacity up to 1000N. This most rugged model is suitable for a variety of complex testing with its wide speed range, and digital setting ...

... analysis unit FSA series is a unit consists of a force gauge, test stand, cable, and software. It analyzes deformation amount (displacement) and compression/tension force, ideal for tactile test and material ...

Tabletop Force Gauge Calibration Unit TFCU series A tabletop calibration unit designed for checking the force gauge’s measurement accuracy. The force gauge’s accuracy can be verified by comparing ...

... • JIS D203 • IEC 60598-1 • LV 124 • GS 95003-4 • NEMA 250 You would rather expand a room for your IP tests because your test items are large or bulky! Contact us. We would be happy to advise ...

The compact ES05 test stand is designed for compression testing of up to 30 lbF (150 N). Typical applications include switch contact activation testing, small spring testing, peel testing, and more. A ...

The ES10 and ES20 manual test stands are compact and economical solutions for compression and tensile testing of small samples. Choose between a lever (ES10) for quick-action testing or a hand wheel (ES20) ...

The ES30 Force Measurement Test Stand is a versatile and economical solution for most compression and tensile testing applications. It can accept a wide variety of sample shapes and sizes and can be configured ...

motorized material test stand to 5000 N, adaptable for all PCE Force Gauges series with internal and external load cell, large stroke, variable feed speed - adjustable feed rate - large range of motion - ...

5~45Kg/ cm2 Capacity/ASTM TAPPI JIS GB Product description burst strength test stand is the international general (Mullen) instrument, widely used in packaging materials, mainly used for the determination ...

... furniture,ceramic present The usage Simulation Transportation Vibration Testing machine which simulates a transporation environment, is applicable to the vibration test of toys, electronics, furnitures, ...

... Product description: It apply to Innerspring, Box spring mattresses and Foam mattress. The Cornell Type Tester is used to test the long term capacity of bedding to resist cyclic loading. The machine consists of a double ...

... independent tests on up to five (5) separate specimens using a single load frame. Based on our standard 68TM-30 testing frame (30 kN capacity)*, this system is especially suitable when test times are ...

... prior to initiation of the test Effective Automatic Cutter Get accurate results when performing method A tests with our motorized cutter. Cutting time repeatability is within 0.01 s Test ...

... allows rapid removal prior to initiation of the test Effective Automatic Cutter Get accurate results when performing method A tests with our motorized cutter. Cutting time repeatability is within ...

... This manual test stand is ideal for tensile testing, compression testing, peel, and flexural testing. It may be equipped with a quick-action lever or precision hand wheel for controlling ...

The MT Series is a manual test stand for force measurement applications up to 500 lbf (2.5 kN) capacities. The test stand can be bench mounted, wall ...

The motorized TCM Series force testers feature a small footprint while retaining ample clearance for large samples. With an ideal 100 mm (3.9 in) throat clearance, testing of large samples is no longer a limitation. The universal adapter ...

With our pull tester you can do simple quality tests by yourself. This machine is made very simple and works without any electronics. Via hand crank the welded geomembrane is pulled apart. Easy usage No electricity ...

... Electro-hydraulic servo car steering gear test bench Application This series of fatigue test bench adopts multi-channel electro-hydraulic servo technology, taking ...

Measure: Weight; Diameter, cicumference, Length; Pressure drop; Ventilation; Moisture; Hardness; Visual shape inspection that can be combined with cutter. Compatible with close loop SODILINK to interface with makers to adjust production parameters

... With such a time difference between the time of manufacture and the final quality assurance validation, confidence in the measuring tools on the production floor is a must. The OMI+ delivers accurate measurements, fast ...

​SODIQUBE is automated (offline) laboratory and factory floor test stations for the measurement of weight, pressure drop, ventilation, diameter / circumference (physical parameters) of cigarettes, filter rods, cigars and cigarillos.

Comprehensive fatigue test bench for deep-sea environmental simulation of oil pipelines The test system is used to simulate the internal and external alternating stress existing ...

... performance test, shear aging test, friction coeffiffifficient test, and test of axial compression deformation and radial deformation under loading test ...

... automatic tensile tests on metallic or plastic specimens. The unit is manufactured in accordance with the standards of EN 10002-1, ISO 6892, ISO 527-2, JIS Z 2201, ASTM E8, and ASTM D790. The unit can be linked to ...

For automated tensile tests on metals (small series) Industries • - Metals Type of test • - Tensile Specimen range • - Specimens up to 5 kg, small series Standards • - ISO 6892 • - JIS ...

For automated tensile tests and complex test tasks on metals Industries • - Metals Type of test • - Tensile Specimen range • - Specimens up to 10 kg • - Complex test ...

Manual test benches for compressive force measurement • Provides quick and consistent testing • High level of security with repeated measurements • Provides maximum versatility and precise measuring ...

... range 300 mm, readability 0,01 mm, measuring accuracy 0.5 % of [Max], USB-A cable 1,5 m, high data acquisition speed - Motorised test stand for tension/compression force measurements - ...

Practical set for force-displacement-measurements in laboratory and industry - Five in one – motorised test stand, digital length measuring device LB, interface cable, data transfer software AFH FD, two interface converters ...

... even more expensive than the ancreation of a test stand. So why take unnecessary risks? By checking your quality switch you in the future even the smallest risk. With the P 160 or P 160 Ecoline workshop test ...

... resulting in high costs – often higher than the price of a test bench. Why take a risk that can be easily avoided? By testing the quality of your products, you opt for safety. The P 180 workshop test ...

Hydrostatic pressure test stand - P 250 The P 250 Test Bench with Control C.2 IPC is a new modular test bench that can be adapted to ...

... broadest range of applications. The DMA 3200 features patented ElectroForce linear motor technology enabling a single instrument to deliver unequalled performance and data accuracy. This unique motor technology combines ...

... for characterizing the anisotropic behavior of materials and soft tissues. The ElectroForce Planar Biaxial TestBench instrument offers superior control and unparalleled performance in material and soft tissue characterization. ...

... include multi-channel and multi-axis options. Reaction brackets are pre-designed to allow attachment of components or the test specimen to the mounting baseplate. In addition, a saline bath can be provided as an environmental ...

... speed, whilst gripping the sample in a uniform manner, the motorised MultiTest-dV significantly enhances the repeatability of test results. Operators can perform routine batch testing with excellent throughput, minimising ...

... speed, whilst gripping the sample in a uniform manner, the motorised MultiTest-dV significantly enhances the repeatability of test results. Operators can perform routine batch testing with excellent throughput, minimising ...

... speed, whilst gripping the sample in a uniform manner, the motorised MultiTest-dV significantly enhances the repeatability of test results. Operators can perform routine batch testing with excellent throughput, minimising ...

... housing and allows a precise way of proceeding for simple tests. •One-column •Dynamometer •Force •Manually-driven •Type - One-column tension / compression load frame •Version - Table top model •Measuring ...

... the model TesT 103 is a well-priced solution for various testing tasks. • SoftTesT • Motor-driven • One-column • Dynamometer • Force • Type - One-column tension / compression load frame • Version - Table ...

... we offer the model TesT 104 from our array of products. The cross-beam of this load frame will be moved by a hand crank. The crank is fixed at the front side of the housing and allows a precise way of proceeding for ...

... needed to accurately and efficiently test miniature motors and micro motors is included with the purchase of a Magtrol Micro Dyne. The only component that needs to be supplied by the customer is a laptop or desktop ...

... Eddy-Current induced on an aluminum disc directly mounted on the DUT (Device Under Test) shaft. Torque is measured frictionless by a Reaction Torque Sensor mounted under the test bench ...

... With the ability to bring the motor under test (MUT) to synchronous RPM before beginning a test, repeatability is improved. Since the motor windings are at ambient temperature before starting a ramp ...

• Peeling test / tension test of the welding seam • Enables ideal setting of the welding machine

... AUTOMOTIVE Chassis and components test benches Power steering test bench Seat belt anchorage test bench ( ECE 14) AEROSPACE Fatigue component test ...

... force : Mechanical sensor => 6T Digital sensor => 5T – Maximum stroke : 225 mm Dial gauge reading tolerance: – Mechanical gauge tolerance : ± 10% – Digital gauge tolerance : ± ...