NORD electric motors

Power: 2 W
Intensity: 69 mA - 3,100 mA
Torque: 0.0013, 0.0015, 0.0069, 0.0044 Nm

Vishan motor group is always well prepared to delivery our best service via such downsize and optimize brushless slotless DC motor, our Efficient work will assistant you to find the right ...

Power: 4 W
Intensity: 72 mA - 7,550 mA
Torque: 0.003, 0.0166, 0.0165, 0.0167 Nm

Vishan motor group is always well prepared to delivery our best service via such downsize and optimize brushless slotless DC motor, our Efficient work will assistant you to find the right ...

Power: 4 W
Intensity: 100 mA - 4,440 mA
Torque: 0.0199, 0.0035, 0.0182, 0.0205 Nm

Vishan motor group is always well prepared to delivery our best service via such downsize and optimize brushless slotless DC motor, our Efficient work will assistant you to find the right ...

Power: 0.55 kW - 315 kW
Intensity: 54.5 A
Torque: 119 Nm

... temperature driven industry is still power machinery industry so the company developed a series of D1CS products to meet the special application field of high temperature and air conditioning industry. The D1CS exhaust ...

Power: 1.5 kW - 200 kW
Intensity: 4.25 A - 490 A
Torque: 539 Nm

... degrees C. The two kinds of motors have the same parameters. The motor has good closeness. The motor protection level for general places is IP44, and the motor protection ...

Power: 0.75 kW - 315 kW
Intensity: 54.9 A
Torque: 2 Nm

... YBX3 series high efficiency flameproof three-phase asynchronous motor is a series of self sealing fans, fan fans, squirrel cage and high efficiency flameproof three phase induction motors developed by ...

Power: 40, 100 W
Intensity: 4 A
Torque: 2 Nm

Direct wheel drive, roller conveyors and turntables. High torque at low speed, special solutions on request Field of application: - Direct drive of wheels, roller conveyors - Turntables - High torque at low speed Advantages ...

Power: 40 W - 500 W

When high-precision and 100% accuracy is required motors with positioning accuracy in the micrometer range, DA series prove their worth. With a compact space-saving build and relatively cogging (detent torque) free ...

Power: 50 W - 500 W

The GM Series manufactured by KERN is a type of a motor equipped with a precise turn run. Additionally, the precise true run of this device is operated with a flexible spectrum. This device is applicable for a wide range ...

Power: 50 W
Torque: 0.3 Nm
Rotational speed: 2,800 rpm - 6,400 rpm

Motor M42: DC motor with permanent magnets 12 and 24 Volt, with starting torque up to 0.3 Nm. Further details such as parts’ images, nominal voltage, no-load speed and output power, ...

Power: 100 W
Torque: 2.5, 2 Nm
Rotational speed: 1,200 rpm - 7,000 rpm

Motor M62: DC motor with permanent magnets 12, 24, 36 and 48 Volt, with starting torque up to 2.5 Nm. Further details such as parts’ images, nominal voltage, noload speed and output ...

Power: 120, 350 W
Torque: 2.5, 2 Nm
Rotational speed: 5,000 rpm

Motor M76: DC motor with permanent magnets 12, 24, 36 and 48 Volt, with starting torque up to 2.5 Nm. Further details such as parts’ images, nominal voltage, no-load speed and output ...

Power: 0.5 kW - 185 kW
Rotational speed: 1,000 rpm - 3,000 rpm

... handling combined with reliability are of course standard features for this series. Sample applications: - Extruder - Turret trucks - Coating machines - Crane drives - Transmission/ engine test ...

Power: 0.15 kW - 150 kW
Rotational speed: 500 rpm - 3,600 rpm

... those of corresponding 3 -phase motors or can be altered to requirements. In this product line, the use of a compensating coil guarantees a high dynamic response. Sample applications: - Braking motors ...

Power: 0 kW - 46 kW
Rotational speed: 500 rpm - 5,000 rpm

... noise level. Sample applications: - Mobile tools Drive motors in electric vehicles - Motors for auxiliary drives in a wide range of vehicles Areas of application: The ...

Power: 1.8, 1.57 W
Torque: 0.005 Nm - 0.008 Nm
Rotational speed: 375, 450 rpm

The ASM 0516 and ASM 0518 Series is composed of AC synchronous electric motors developed by ASTRO Motorengesellschaft. The shaft of these motors have a speed of 500 and ...

Power: 6.6, 6.3 W
Torque: 0.027 Nm - 0.062 Nm
Rotational speed: 0.75 rpm - 1,200 rpm

ASTRO's Explosion-proof motors have frequency of 50 or 60 Hz.The Gas Model is manufactured as per II 2 G Ex ec II T4 and the Dust model as per II 2 D Ex tD c A21 P65 T 90° C.For 3 D (dust) and 3 G (gas) ...

Power: 3.1, 2.6 W
Torque: 0.026 Nm - 0.03 Nm
Rotational speed: 1,200, 1,000 rpm

The AC synchronous electric motor ASM 16 Series is manufactured by ASTRO Motorengesellschaft. The product has compact and durable design. The product comes with a ball bearing and the ...

Torque: 0.65, 0.35, 0.45 Nm

NEMA17 Short Closed Loop Stepper Motors Product description: With a superior closed loop control and a cost-effective design, the integrated stepper motors provide an efficient and economical solution ...

Torque: 1.8, 2.6, 1.1 Nm

NEMA23 Closed Loop Stepper Motors Advantages： ●Sophisticated closed loop control enhances motor performance with no step loss ●Operates in torque, velocity, and position modes ●Efficient torque ...

Torque: 3.5, 5.5, 5, 7.7 Nm

NEMA34 Closed Loop Stepper Motors Advantages： ●Sophisticated closed loop control enhances motor performance with no step loss ●Operates in torque, velocity, and position modes ●Efficient torque ...

Power: 600, 290, 450 W
Intensity: 14 A
Torque: 18, 6 Nm

... BLDC outrunner motor with its compact design is perfectly suited for a direct drive. It can achieve torques of up to 13 Nm, even in continuous operation. The stable bearing allows for high radial loads. Special features The ...

Power: 134, 201, 301 W
Intensity: 5.6, 7.3 A
Torque: 0.6 Nm

... plug-in system. Additional power electronics are required to operate the motor. Motor design with a hollow shaft is also available upon request. This allows the cables to run through ...

Power: 106, 167, 232 W
Intensity: 5.6, 5.4 A
Torque: 1.9 Nm

... Additional power electronics are required to operate the motor. The design of the motor with a hollow shaft allows the cables to run through the motor or output on both ...

Power: 180 W - 30,000 W
Intensity: 0.56 A - 59 A
Torque: 2 Nm - 26 Nm

... Sizes 63 up to 200 • High torque DC brake • Standard rectifier: 230V, 50/60Hz (others on request) The brake units are a single disc type mounted on the non-drive end-shield of the motor and can be ...

Torque: 15, 7 Nm
Rotational speed: 160, 180 rpm

The KDU Series are Direct Drive Motors which achieve 10 arc-sec positioning accuracy as well as ±0.5 arc-sec repeatability with a resolution of 0.16 arc-sec. The KDU has a large Hollow Shaft design which allows cables, ...

... standard with powerful frequency inverter motors for extremely sensitive, gentle traveling. Standard frequency inverter motors with overheat protection Plug connection on the motor ...

Power: 0.375 kW - 2.2 kW
Rotational speed: 2,850 rpm

... How to Select Pump and DC Motor Combinations: The following section contains pump/motor curves for various combinations of pumps and motors used on Stone hydraulic ...

Torque: 0.79, 1.53, 2.21 Nm

The RP34 BLDC Motor Nema 34 features a peak torque that goes up to 1096 oz-in. It is a brushless motor which integrates ball bearing construction and a low cogging electro-magnetic design, both of which ...

Torque: 0.45, 0.69, 0.83, 1.09 Nm

... a compact brushless servo motor equipped with a maximum holding torque power of 390 Ncm. It has a weight of 1.4 kg, current of 6.8 A, inductance of 21 mH, resistance of 20 ohms, and voltage ...

Torque: 1, 2.01, 3.01, 4.01 Nm

Our ElectroCraft RapidPowerTM Plus Brushless Servo Motor, Nema 34, is a high voltage, high performance brushless servo motor incorporating the latest electro-magnetic components creating high continuous ...

Power: 4,021 W
Intensity: 9 A
Torque: 32 Nm

... a high torque EC Fan Motor. WHAT IS EC MOTOR TECHNOLOGY? An Electronically Commutated (EC) motor is a brushless motor where the commutation of the ...

Torque: 7 Nm

... input. ► Motor current overboost. ► Intelligent management of the current profile. ► Range of operating voltage: 32-80 VDC. ► Protections: -Protection against under-voltage and ...

Torque: 3 Nm

... POSITION and CSP. ► Different variety of HOMING operation modes. ► TOUCH PROBE hardware input. ► Motor current overboost. ► Intelligent management of the current profile. ► Battery ...

... Setting by means of a rotatory dip-switch. ► Automatic current reduction at motor standstill. vProtections: -Protection against under-voltage and over-voltage. -Protection against a short-circuit ...

Power: 0.06 kW - 37 kW
Rotational speed: 1,000, 750, 3,000, 1,500 rpm

HFM’s three phase motors are general purpose motors and designed according to IEC 60034. The motors can be customized according to your requirement -Junction Box is 90° Rotatable ...

Power: 3, 0.6, 4, 0.12 W
Rotational speed: 1,000, 1,500, 3,000 rpm

HFM’s single phase motors are general purpose motors and designed according to IEC 60034. Designed for “general purpose” use means that these motors can be used in many applications. The ...

Power: 0.06 kW - 37 kW
Rotational speed: 1,500, 3,000, 750, 1,000 rpm

Designed for the applications which require multiple speeds. Two speed motors can be designed for constant torque or variable torque (quadratic torque). Double poles(such as 2/4 poles or 4/8 poles) or double windings(such ...

Power: 0.09 kW - 18.5 kW

... of variants: ABM AC induction motors are available as energy-saving motors, single-phase motors, liquid-cooled motors, two speed motors, ...

Power: 0.12 kW - 13 kW
Torque: 0.75 Nm - 75 Nm
Rotational speed: 500 rpm - 6,000 rpm

The ABM SINOCHRON® motor is a permanently excited synchronous motor with internal permanent magnets (IPM motors). Through the special design, additional encoder technology is not needed, ...

Power: 0.25 kW - 2.2 kW
Intensity: 1.6 A - 11 A
Operating temperature: -10 °C - 40 °C

3-phase Motor with Integrated Controller. The switch to 3-phase motors is accomplished easily and impresses with a high reduction of TCO at maximum efficiency. • Identical power ...

Power: 0.06 kW - 22 kW
Operating temperature: -20 °C - 40 °C

... calculate all electric designs ourselves, so we, unlike many, know what we manufacture. Motors within one day Our stock in the EU exceeds the value of one million EUR. Therefore, we can dispatch your ...

Power: 0.06 kW - 3 kW
Rotational speed: 1,500, 3,000 rpm
Operating temperature: -20 °C - 40 °C

HM motors are delivered in two variants. HM1 for the expected performance during the motor run or HM2 for the expected performance during the motor startup and run. In our company, ...

Power: 0.75 kW - 355 kW
Operating temperature: -20 °C - 40 °C

... calculate all electric designs ourselves, so we, unlike many, know what we manufacture. Motors within one day Our stock in the EU exceeds the value of one million EUR. Therefore, we can dispatch your ...