OKS high-speed lubricants

Operating temperature: -50 °C - 120 °C
Viscosity: 0.000015, 0.000004 m²/s

OKS 416 is a low temperature and high speed grease. Advantages and benefits High efficiency through optimal formulation Multifunctional application beside the regular range of performance ...

Operating temperature: -40 °C - 140 °C
Viscosity: 0.00005, 0.000008 m²/s
Pour point: 268 °C

Fully synthetic high-performance grease for long-term lubrication of machine elements at high temperatures, speeds and loads. Advantages and benefits Allows high ...

Operating temperature: -50 °C - 130 °C
Viscosity: 0.00003, 0.000006 m²/s
Pour point: 200 °C

OKS 425 is a synthetic grease for long-term lubrication of machine elements. Advantages and benefits Good low-temperature behaviour, stress absorbing ability and smooth run at high speeds Good ...

Operating temperature: -30 °C - 120 °C
Viscosity: 0.00012, 0.00002 m²/s
Pour point: 200 °C

... the amount of grease has to be limited to avoid excess lubrication of the gear. At longer relubrication intervals a complete exchange of the old grease is recommended. Mix with appropriate lubricants only.

Operating temperature: -45 °C - 120 °C
Viscosity: 0.00003, 0.000006 m²/s
Pour point: 200 °C

... and machine manufacturer's instructions should be observed. Subsequent lubrication at the lubrication nipples by grease gun or by automatic lubrication systems Assess the lubrication ...

Operating temperature: -60 °C - 120 °C
Viscosity: 0.00003, 0.000012 m²/s

... synthetic high-performance grease with PTFE for use at low temperatures and high speeds. Areas of application Grease lubrication of plain and roller bearings with ...

Operating temperature: -30 °C - 220 °C
Viscosity: 0.001, 0.000053 m²/s

OKS 490 is a gear lubrication grease for open and half open gears. Areas of application For highest contact pressure and high circumferential speed, e.g. for rotary kilns, ball mills, ...

Operating temperature: -20 °C - 120 °C
Viscosity: 0.00102, 0.000058 m²/s

... bearings at very high. Areas of application Grease lubrication of rolling and plain bearings subject to very heavy loading Protection of bearings against harmful impurities Protection against corrosion, ...

Viscosity: 0.000022 m²/s
Pour point: 175 °C

Non-water-miscible cutting oil for lubricating and cooling tools and workpieces during machining work on metals. Areas of application Drop lubrication of cutting tools at machining work on ferrous ...

Viscosity: 0.000022 m²/s
Pour point: 175 °C

Non-water-miscible cutting oil for lubricating and cooling tools and workpieces during machining work on metals. Areas of application Drop lubrication of cutting tools at machining work on ferrous ...