OKS silicone greases

Operating temperature: -40 °C - 200 °C
Viscosity: 0.0095, 0.0038 m²/s

... of service conditions. Only mix with suitable lubricants. Caution: Plastic based on silicone, such as silicone rubber can be attacked by silicone grease. Silicone ...

Operating temperature: -40 °C - 200 °C
Viscosity: 0.0038, 0.0095 m²/s

... lubricants. Bearings lubricated with silicone grease may only be stressed to about 1/3 of the permissible bearing load. Plastic based on silicone, for example silicone ...

Operating temperature: -30 °C - 200 °C
Viscosity: 0.0001 m²/s
Flash point: -40 °C

... 1112 is a silicone grease for slide valves and valves. Areas of application Lubrication of closing devices and taps, as well as ground joints in industrial vacuum and laboratory equipment, if the ...

Operating temperature: -73 °C - 200 °C
Viscosity: 0.0001, 0.00008 m²/s

OKS 1133 is a low-temperature silicone grease. Areas of application Lubrication of rolling and friction bearings, as well as other machine elements at medium rotating speeds or sliding speeds in a ...

Operating temperature: -20 °C - 290 °C
Viscosity: 0.0001 m²/s
Pour point: 250 °C

... Relubrication with a grease gun on to the grease nipples or with an automatic lubrication system. Relubrication intervals and amount to be defined acc. to the service conditions. If the removal of the ...

Operating temperature: -40 °C - 200 °C
Viscosity: 0.000125 m²/s
Pour point: 250 °C

... Highly effective due to optimum temperature-stable silicone grease formula Excellently suited for grease lubricating points subject to changing temperature loads Broad range of uses ...

Operating temperature: -50 °C - 180 °C
Viscosity: 0.0002 m²/s

OKS 1149 is a silicone grease with PTFE for the long-term lubrication of plastic/plastic, plastic/metal, and elastomer/metal pairs under low to medium bearing loads and speeds. Areas of application Lubrication ...

Operating temperature: -65 °C - 175 °C
Viscosity: 0.0001 m²/s

... functional surfaces for sure get the grease. Slow moving bearings(DN-value 400,000) up to about 1/4. Observe the instructions of the bearing or machine manufacturer. Relubrication with a grease gun on ...