OKS silicone lubricants

Operating temperature: -40 °C - 200 °C
Viscosity: 0.0095, 0.0038 m²/s

... instructions. Assess the lubrication frequency and quantity on basis of service conditions. Only mix with suitable lubricants. Caution: Plastic based on silicone, such as silicone ...

Operating temperature: -40 °C - 200 °C
Viscosity: 0.0038, 0.0095 m²/s

... mix with suitable lubricants. Bearings lubricated with silicone grease may only be stressed to about 1/3 of the permissible bearing load. Plastic based on silicone, for example silicone ...

Operating temperature: -30 °C - 200 °C
Viscosity: 0.0001 m²/s
Flash point: -40 °C

... Observe the instructions of the machine manufacturer. Only mix with appropriate lubricants. Silicone-based plastics, e.g. silicone rubber, can be dissolved by silicone ...

Operating temperature: -73 °C - 200 °C
Viscosity: 0.0001, 0.00008 m²/s

OKS 1133 is a low-temperature silicone grease. Areas of application Lubrication of rolling and friction bearings, as well as other machine elements at medium rotating speeds or sliding speeds in a ...

Operating temperature: -20 °C - 290 °C
Viscosity: 0.0001 m²/s
Pour point: 250 °C

OKS 1140 is an extreme-temperature silicone grease for slow-running machine elements at extremely high temperatures. Areas of application Lubrication of slow-running rolling and friction bearings, ...

Operating temperature: -40 °C - 200 °C
Viscosity: 0.000125 m²/s
Pour point: 250 °C

OKS 1144 is a multipurpose silicone grease for bearings at changing temperatures and medium speeds. Areas of application Lubrication of rolling and friction bearings at operating temperatures around ...

Operating temperature: -50 °C - 180 °C
Viscosity: 0.0002 m²/s

OKS 1149 is a silicone grease with PTFE for the long-term lubrication of plastic/plastic, plastic/metal, and elastomer/metal pairs under low to medium bearing loads and speeds. Areas of application Lubrication ...

Operating temperature: -65 °C - 175 °C
Viscosity: 0.0001 m²/s

OKS 1155 is a strongly adherent silicone grease for lubrication of plastics and elastomers. Areas of application Lubrication of sliding points between metals, plastics and elastomers ...

Operating temperature: -50 °C - 200 °C
Viscosity: 0.0001 m²/s
Pour point: 280 °C

... thin. Avoid excess. Mix with appropriate lubricants only. Silicone based plastics, e.g. silicone rubber could be affected through the silicone oil. At sliding areas ...

Operating temperature: -50 °C - 200 °C
Viscosity: 0.001 m²/s
Pour point: 280 °C

... thin. Avoid excess. Mix with appropriate lubricants only. Silicone based plastics, e.g. silicone rubber could be affected through the silicone oil. At sliding areas ...