OKS universal lubricants

Viscosity: 0.00011 m²/s
Operating temperature: -30 °C - 120 °C

Universal grease with white solid lubricants. Areas of application Lubrication of normal-load friction, rolling and pivoting bearings Lubrication of spindles and ...

Viscosity: 0.0017 m²/s
Operating temperature: -40 °C - 200 °C

Silicone-free lubricating and sealing grease for plastic/plastic and plastic/metal combinations. Areas of application For the lubrication of machine parts under high mechanical loads Silicone-free ...

Viscosity: 0.0095 m²/s
Operating temperature: -40 °C - 200 °C

... carefully clean the lubricating point, e.g. with OKS 2610/OKS 2611 universal cleaner. Spray directly onto lubricating point and let the solvent evaporate. Avoid excesses. Observe the ...

Viscosity: 0.000108 m²/s

... travelling grates in firing systems Dry lubrication at temperatures above 200°C Lubrication of elastomers and plastics not resistant to mineral oil Advantages and benefits Highly suitable as a high-temperature ...

Viscosity: 0.000022 m²/s

Non-water-miscible cutting oil for lubricating and cooling tools and workpieces during machining work on metals. Areas of application Drop lubrication of cutting tools at machining work on ferrous ...

Operating temperature: -30 °C - 150 °C

... noises Lubrication of friction points at moving machine parts Advantages and benefits Broad range of uses (6-fold action) Highly effective due to very good creep properties Also infiltrates strong oil and greasy ...

Operating temperature: -30 °C - 150 °C

... even in narrow, hard-to-reach lubricating points Good lubricating and pressure absorption capacity Excellent corrosion protection Good wear protection, also in comparison to higher-viscosity oils without ...

Viscosity: 0.01 m²/s
Operating temperature: -30 °C - 120 °C

OKS 400 is a multipurpose high-performance grease with MoS₂ for universal use. OKS 400 - MoS₂ Multipurpose High-Performance Grease Areas of application Lubrication ...

Viscosity: 0.00011 m²/s
Operating temperature: -30 °C - 120 °C

Multipurpose grease for the lubrication of machine elements under normal stress load. Areas of application Lubrication of friction, rolling and pivoting bearings, splined shafts, ...

Viscosity: 0.0001 m²/s
Operating temperature: -30 °C - 150 °C

... and machine manufacturer's instructions should be observed. Subsequent lubrication at the lubrication nipples by grease gun or by automatic lubrication system. Assess the lubrication ...