PARKER valves with handwheel

DN: 15 mm - 150 mm
Pressure: 10, 40 bar
Temperature: -60 °C - 350 °C

The sliding gate manual valve type 8050 in long design with on/off and control operation is suitable for a wide range of process applications. Media such as steam, liquids, gases, etc. can be shut off safely with low ...

DN: 2 in - 36 in

... water, and safety injection valves. Copes-Vulcan nuclear valves are manufactured in Houston, Texas. The Houston facility holds the following certification 'N', 'NPT', and 'NR' and is certified by ASME ...

Temperature: 454, 565 °C

The DSCV-SA is generally used for Turbine Bypass applications where the valves typically remain closed for long periods of time to isolate steam flow.: Cast & fabricated design. Wide size configuration Extremely ...

DN: 2 in - 36 in

M&J Valve Expanding Gate (EG) valves can be used in wide range of critical applications, from pipelines to power plants, in ESD and other demanding isolation applications. Description The M&J Valve ...

DN: 20 mm - 600 mm
Pressure: 16 bar
Temperature: -40 °C - 200 °C

Thanks to their design and material diversity, centrally mounted, resilient seated shut-off and control valves are almost universally usable. Whether the medium is water, powder or gas - with a broad range of materials, ...

DN: 50 mm - 300 mm
Pressure: 6 bar
Temperature: -10 °C - 90 °C

Thanks to their design and material diversity, centrally mounted, resilient seated shut-off and control valves are almost universally usable. Whether the medium is water, powder or gas - with a broad range of materials, ...

DN: 50 mm - 1,200 mm
Pressure: 25 bar
Temperature: -40 °C - 200 °C

Soft seated double flanged butterfly valve designed for high pressure applications. The combination of vulcanized liner and thrugoing shaft allows pressure loads up to 25 bar. FEATURES- Butterfly valve ...

DN: 0.063 in - 0.118 in
Pressure: 0 psi - 6,000 psi
Temperature: -54 °C - 232 °C

... extensive range of corrosion resistant body materials, mounting options, anti-tamper spindles, lockable handwheels and T-bars. Parker's H series hand valves are available with a wide array of connection ...

DN: 0.063 mm - 3 mm
Pressure: 0 psi - 20,000 psi
Temperature: -54 °C - 232 °C

Parker's Hi-Pro ball valve is a two piece bi-directional manual ball valve designed for cold working pressure process control applications from 3,600 PSI (247 bar) up to 20,000 PSI (1379 bar) rating, ...

DN: 0.063 in - 0.118 in
Pressure: 0 psi - 3,000 psi
Temperature: -54 °C - 232 °C

Parker's MB Series ball valves, with barstock body and compact design, offer positive shut off or directional control of fluids. These ball valves work in a variety of pressure and temperature applications.up ...

DN: 15 mm - 200 mm
Pressure: 16 bar
Temperature: -20 °C - 160 °C

Weir-type diaphragm valve to DIN/EN with flanged ends, threaded socket ends or socket weld ends, in straight-way pattern; shut-off and sealing to atmosphere by supported and confined diaphragm; body with coating or lining, ...

DN: 15 mm - 200 mm
Pressure: 0 bar - 16 bar
Temperature: -20 °C - 160 °C

Weir-type diaphragm valve to DIN/EN with flanged ends, threaded socket ends or socket weld ends, in straight-way pattern; shut-off and sealing to atmosphere by supported and confined diaphragm; body with coating or lining, ...

DN: 15 mm - 200 mm
Temperature: -20 °C - 140 °C

... position indicator prevents ingress of contaminants. Valve hydraulics without dead volume ensure optimum conditions for high-purity fluids + protection against deposits. Quick identification of valve ...

DN: 6 mm - 80 mm
Pressure: 0 bar - 25 bar
Temperature: -10 °C - 180 °C

Globe valve - 507 The GEMÜ 507 2/2-way angle seat globe valve has an ergonomically designed plastic handwheel and is manually operated. The valve spindle is sealed by ...

DN: 10, 8, 4, 15, 6 mm
Pressure: 0 bar - 10 bar
Temperature: -10 °C - 100 °C

Diaphragm valve - 601 The GEMÜ 601 2/2-way diaphragm valves have a temperature resistant plastic handwheel and are manually operated. The GEMÜ 602 valve has a stainless ...

DN: 10 mm - 100 mm
Pressure: 0 bar - 10 bar
Temperature: -10 °C - 100 °C

Diaphragm valve - 653 The GEMÜ 653 2/2-way diaphragm valve has a stainless steel bonnet and is manually operated. The valve features a handwheel made of temperature ...

DN: 15 mm - 65 mm
Pressure: 10 bar
Temperature: -20 °C - 120 °C

... identify the valve on the system according to specific needs DIALOCK® SYSTEM: innovative handwheel with a patented immediate and ergonomic operating locking device that allows it to be adjusted and ...

DN: 15 mm
Pressure: 6 bar
Temperature: -20 °C - 140 °C

Compact diaphragm valve with male ends for solvent welding, metric series. The CM is a manually operated diaphragm valve of reduced dimensions and particularly compact structure, ideal for use in confined ...

DN: 12, 15 mm
Pressure: 6 bar

The CM is a manually operated diaphragm valve of reduced dimensions and particularly compact structure, ideal for use in confined spaces. Main features: Handwheel in PA-GR, completely sealed, ...

DN: 65 mm - 150 mm
Pressure: 16 bar
Temperature: -20 °C - 55 °C

ALL-IN-ONE actuator for 3 points without relay or 2 points with relay connection Protected type, manual emergency override, 2 extra micro switches

DN: 50 mm - 150 mm
Pressure: 16 bar
Temperature: -20 °C - 55 °C

ALL-IN-ONE actuator for 3 points without relay or 2 points with relay connection Protected type, manual emergency override, 2 extra micro switches

DN: 100, 125, 250, 150, 200 mm
Pressure: 16 bar
Temperature: -20 °C - 55 °C

ALL-IN-ONE actuator for 3 points without relay or 2 points with relay connection Operating time: 45 sec for 90° rotation – 22Nm Protected type, manual emergency override, 2 extra micro switches Body and disc in GG25, polyamide ...

DN: 50 mm - 300 mm
Pressure: 10, 6 bar
Temperature: -10 °C - 120 °C

KNIFE GATE VALVE WITH STAINLESS STEEL BODY, STAINLESS STEEL GATE AND EPDM SEAT

Pressure: 10 bar
Temperature: -30 °C - 130 °C

Tork's T-KV .W1120 is an industrial application valve which is recommended for applications that include ship building, hot and cold water, HVAC application, textile units, base and salty conditions, acids-alcali and ...

DN: 25 mm - 400 mm
Pressure: 0 bar - 10 bar
Temperature: 180 °C

Energy saving valve for the precise and economical control at low loss of pressure of liquids and gases that can be either clean or contain particles. For : Air for aeration in wastewater treatment plant Gases Municipal ...

DN: 8, 6, 4, 10 mm
Pressure: 0.2 MPa - 1 MPa
Temperature: 0 °C - 60 °C

Industry's First! It enables same control as the cylinder with shock absorber. (Patent no. 5578502) Shock absorber is not required. Two-stage exhaust flow rate adjustment is realized. By using 2nd stage exhaust speed to be as cushion ...

DN: 4, 8, 6, 12, 10 mm
Pressure: 0 MPa - 0.9 MPa
Temperature: 0 °C - 60 °C

Best suitable for high-speed drive cylinder. Possible to control high-speed cylinder. Exhaust needle valve type, whose exhaust port incorporates throttling function, is available. Tube O.D. 3mm is available for ...

Pressure: 0 MPa - 0.9 MPa
Temperature: 0 °C - 60 °C

This Exhaust Needle Valve controls the exhaust flow rate. The valve can be attached directly to a solenoid valve. Best suitable in case a cylinder, etc has no sufficient space around ...

DN: 4, 8, 6 mm

The Burkle 2 and 3-way valves are utilized for transferring liquids or gases in order to release, block, or divert the direction of the flow. The PVDF-transparent framework allows optimum chemical resistance which makes ...

DN: 2 in - 12 in
Pressure: 300 psi
Temperature: 0 °C - 80 °C

Model HBF-300G , UL Listed Grooved Type Butterfly Valve, cuts or regulates the flow of fluid through the piping systems. Grooved Type Butterfly Valve for fire protection serve as a control valve ...

DN: 2.5 in - 12 in
Pressure: 300 psi
Temperature: 0 °C - 80 °C

... butterfly valve? 1．Set auxiliary screw at proper place, to regulate distance between two flanges or groove faces. 2．For wafer butterfly valve, insert the valve and screw on the ...

DN: 2 in - 12 in
Pressure: 300, 200 psi
Temperature: 0 °C - 80 °C

... OS&Y Gate Valve ,commonly used to control water flow to fire sprinkler systems is known as outside stem and yoke or outside screw and yoke. OS&Y Gate Valve operate by opening and closing via a gate, which ...

DN: 6 in - 48 in
Pressure: 400 psi
Temperature: -30 °C - 200 °C

Reduced Bore, Lever Handle, Floating Ball Design to EN488 Pressure to EN12266.1

DN: 3 in - 56 in
Pressure: 300 psi
Temperature: -50 °C - 650 °C

Design to ASME B16.34/API609 Dimensions to ASME B16.5/B16.1/EN1092 Pressure Test to API598/ISO5208

DN: 3 in - 24 in
Pressure: 600 psi
Temperature: -50 °C - 650 °C

Design to ASME B16.34/API609 Dimensions to ASME B16.5/B16.1/EN1092 Pressure Test to API598/ISO5208

DN: 80 mm - 1,800 mm
Pressure: 10, 16, 25 bar
Temperature: -10 °C - 70 °C

DN: 50 mm - 300 mm
Pressure: 10, 16 bar
Temperature: 0 °C - 80 °C

DN: 150 mm - 2,000 mm
Pressure: 10, 16, 25, 40 bar
Temperature: -10 °C - 70 °C

Shaft and disc polygon coupling “P3G” type according to DIN 32711 Main disc sealing ring made of EPDM according to EN 681-1 WA, WB Internal and external surface protection made of epoxy resin powder (FBE), blue colour RAL ...

DN: 40, 300 mm
Pressure: 10 bar
Temperature: -10 °C - 150 °C

Cast iron (GJL 250) PN 10 gate valve flat body inside screw stainless steel (AISI 304) trim 150°C (max) Main characteristics • Manufactured in Italy in accordance with EN 1171 • Face-to-face length according to EN ...

DN: 40 mm - 300 mm
Pressure: 16 bar
Temperature: -10 °C - 150 °C

Cast iron (GJL 250) PN 16 gate valve oval body OS&Y stainless steel (AISI 304) trim 150°C (max). Made in Italy. Fields of application: Industrial plants - Sewage Water - Water treatment - Air-conditioning systems (HVAC) ...

DN: 40 mm - 300 mm
Pressure: 0 bar - 16 bar
Temperature: -10 °C - 120 °C

Cast iron (GJL 250) PN 16 gate valve flat body inside screw bronze trim max 150°C 13 BAR consolflange for electric actuator. Made in Italy. Fields of application: Industrial plants - Sea water use - Fuel - Aggressive ...