PILZ I/O modules

The TBSPT8-DR is a precision 8 – channel PT100/PT1000 interface. Measurement and configuration is controlled via SDI-12 commands. The interface is equipped with 4-wire inputs, matched noise filters, surge- and over voltage protection. To ...

... CPSN-MCB271-S1-041 model only I/O module expansion With this product, you can freely add I/O modules to match the necessary functions from among the varied ...

The I/O modules in the MX-System offer a wide choice for all signal types and directions. The MO1008-0000-1111, with eight digital inputs, acquires binary control signals from the process level and transfers ...

Input Module IO 113 designed to interface with pump sensors. One without communication as standard variant and one with communication for interface to Sensor Module SM 113

... digital and analog I/O modules Standard and light network adapter for cost sensitive applications OPC UA capability for demand in high grade IoT applications CODESYS based programmable ...

For the S-DIAS system, EPLAN Macros are available for simple integration into the control cabinet. Type - +24 V DC Input voltage - +24 V DC (+18-30 V DC) Input current - 3.5 mA at +24 V Input delay - typically 1 µs Type ...

... expand the digital and analog I/O of ABB’s Relion® series protection relays, provide I/O for the station automation device COM600 using IEC 61850 communication and Grid Automation applications The ...

... ensures that the I/O system 1000 satisfies even the highest accuracy requirements. • Easy wiring • 12.5 mm slim I/O modules with 8 connection points

... Traditional I/O systems are located centrally in the control cabinet, with extensive wiring required for sensors and actuators. In addition, modular machine designs often require intermediate connections with multi-pin ...

... Protection against dust/humidity and mechanical forces such as vibration/shock Broad temperature range: −25 … +80°C Spacer module for seamless installation Signal Acquisition in Exceptionally Harsh Conditions WAGO's ...

Further sensors and system components are needed in order to set up the KNX system and operate it optimally. Presence and motion detectors enable occupancy-related and needs-based control, while a room thermostat and the corresponding ...

... Power supply via FDnet/C-NET in potential-free mode. Monitored mode requires additional DC 24 V power supply. Input/output module incl. 3 resistors and 2 mounting feet for TS35 U-rail. Operating temperature -25…70 ...

Industrial standard e-CON connectors allow direct connection of the unit to sensing devices without use of terminal blocks. This minimizes requirement in installation space and wiring work. • Industrial standard e-CON connectors require ...

... Fully-isolated I/O Application Flexibility •Handles diverse I/O configurations including analog 4-20 mA, 0-5 V or 0-10 V and digital 5-36 VDC •Long range wireless communication up to 30 miles (900 ...

Pluggable I/O Module for FP2 and FP4 Series Features Power from HMI Nominal Input Voltage 24VDC Nominal Output Voltage (PNP) 24VDC) Nominal Output Current 250mA @ 24VDC for PNP, ...

... Remote I/O Module The SEL-2506 Rack-Mount Remote I/O Module has eight digital inputs, eight digital outputs, and a fiber-optic communications port. Connect an SEL-2506 ...

Acquisition and actuation module, usable as extension for operator panels with integrated logic ( ATR313, TD329, TD240) or SCADA software. In a standard container DIN43880 9 modules for rail mountain, ...

DeviceNet Digital Remote I/O (Terminal Block Type/Sensor Connector Type) The ARD-D series digital remote I/O units provide input/output expansion and communication for various devices using DeviceNet ...

The Curtis Model 1352 eXM CANbus Hydraulic Input/Output Expansion Module can be added to any CANbus based control system utilizing the CANopen communication bus protocol. It provides a simple, flexible and cost effective ...

... digital I/O and counter operation, and is designed with a heavy-duty chassis for rugged DAQ applications. The USB-DIO24, -1024, and -DIO96H Series are digital I/O data acquisition ...

... The ONC with LonWorks slave module FC3A-SX5LS1 and SX5LS conforms to LonWorks specifications Modules can be slave stations in LonWorks network consisting of Lonworks compliant products The ...

Combined module of digital inputs and outputs with an NPN open collector and a relay. The integrated power supply has enough power even for additional modules on the bus. 8x digital input ...

... 575, AI 576 Analog voltage outputs: AO 570, AO 571 Analog current outputs: AO 576 Voltage mixer modules: THE 570, THE 571, THE 572 Current mixing modules: AM 575, AM 577

Host Interface Ethernet # of Ports 4/4 Brand/Family eI/O Digital I/O Isolated Inputs, Form C Relay Outputs RoHS Yes Number of Inputs/Outputs 4 Inputs, 4 Outputs Power Requirement 9-30 VDC @ 5W Input Range 5-30 VDC Input ...

... analogue I/O module can be configured for four voltage ranges: 0 to 5V, –5 to +5V, 0–10V and –10 to +10V. The analogue I/O module has a resolution of 16 bit and a sampling ...