PLYMOVENT extraction fans

Rotational speed: 2,800 rpm
Noise level: 10 dB

Don't give hearing damage a chance! The Sound Absorbing Fan (SAF) reduces noise by more than 10 dB, reducing the risk of hearing damage. The exhaust fans from the SAF series are equipped with sound insulation ...

Air flow: 3,000 m³/h - 22,000 m³/h
Rotational speed: 2,900 rpm

... is a central fan with an insulated case made for general filtration- and welding fume extraction systems The SIF ventilation fans are designed for use as central fans. ...

Air flow: 2,400 m³/h
Diameter: 200, 160 mm
Rotational speed: 2,800, 3,400 rpm

... Flex, T-Flex extraction arms FAN-28 is a wall-mounted extraction fan FAN-28 is especially designed to fit the large diameter (200mm) arms in our extraction ...

Air flow: 500 m³/h - 1,870 m³/h
Noise level: 52 dB - 63 dB

... radial fans on KryosROOF provide high flow rates and heads to ensure the correct airflow within the cabinet. In addition, there is a high efficiency version with EC fans and an active control probe, ...

Air flow: 14 m³/h - 700 m³/h
Noise level: 27 dB - 75 dB

The 7F Series of fans and filter fans for cabinets and electrical panel are products to ventilate and safeguard against high temperatures. The range includes the following features (according to Type): ...

Air flow: 1,000 m³/h - 35,000 m³/h

The Extractair® is a centrifugal fan that allows the evacuation of polluted air to the workstations. Installed on the roof and connected to piping networks, it is used to: - Cleaning and air renewal; - Cooling ...

Air flow: 1,000 m³/h - 35,000 m³/h

... and renewing, - cooling of hot environments, - acceleration of drying and evaporation, - extraction of vapours and steams. The Nylair® fans are axial fans covering a wide flow range ...

Air flow: 5,600 m³/h - 34,300 m³/h

... of centrifugal fans EXTRACTAIR® C are suited to various applications. Connected to a piping network they allow the polluted air extraction on workstations such as: - Suction of welding ...

Air flow: 0 m³/h - 1,000 m³/h

Fans are used in combination with duct on KEMPER welding smoke exhaust arms, telescopic arms and suction hoses. They are used for venting or ventilation wherever filtering the air is not important. Due ...

Air flow: 0 m³/h - 3,000 m³/h

Fans are used in combination with duct on KEMPER welding smoke exhaust arms, telescopic arms and suction hoses. They are used for venting or ventilation wherever filtering the air is not important. Due ...

Air flow: 2,000 m³/h - 4,000 m³/h

... . Applications For extraction tables, extraction hoods and extraction arms High levels of smoke and particles Non-stop operation Benefits Low investment costs because extraction ...

BAF - Fans For Extraction Arm Bomaksan branded BAF model fans are specially designed to work with extraction arms. Bomaksan BAF series fans are preferred ...

Air flow: 6,600 m³/h
Rotational speed: 2,890 rpm - 2,940 rpm

Radial fan for high concentrations of dust-laden air FUMEX FTE is a range of radial fans for use at high concentrations of dust-laden air. Fan housings and impellers are made from heavy-duty ...

Air flow: 15,000 m³/h
Rotational speed: 2,755 rpm - 2,950 rpm
Noise level: 70 dB - 94 dB

... has curved blades and is made from welded galvanised sheet metal. The fan complies with the ErP Directive and is optimised for use in conjunction with the Fumex fume extraction and automatic control ...

Air flow: 600 m³/h
Rotational speed: 2,800 rpm

... airflow of up to 600 m³/h (165 l/s). The fan is optimised for use together with Fumex systems for fume extraction and automatic control. C 600 is available in both 1-phase and 3-phase versions. The ...

Air flow: 0 m³/h - 33 m³/h

Filter fan FPO size 1 (92 x 92 mm) for air conditioning enclosures and casings. Configuration: FPO - airflow direction "in" (design: intaking). Optimum filter fan for enclosures: The Filter Fan ...

Air flow: 0 m³/h - 117 m³/h

Filter fan FPO size 2 (124 x 124 mm) for air conditioning enclosures and casings. Configuration: FPO - airflow direction "in" (design: intaking). Optimum filter fan for enclosures: The Filter Fan ...

Air flow: 0 m³/h - 125 m³/h

Filter fan FPO size 2 (124 x 124 mm) for air conditioning enclosures and casings. Configuration: FPO - airflow direction "in" (design: intaking). Optimum filter fan for enclosures: The Filter Fan ...

Air flow: 120 m³/h
Diameter: 100 mm
Noise level: 32 dB

... on db(A) but also on the psychoacoustic analysis to ensure the fan’s sound quality. Pleasant to the ears creating a more agreeable environment. Exceptionally High Air Flow! Superior Fan Blade Design! 120 ...

Air flow: 254, 180 m³/h
Diameter: 100 mm
Noise level: 37, 40 dB

Leading the Ventilation Fan Industry by Continuously Innovating The TUMÄ Eco Ventilation product series features an new beautiful ventilation aesthetic. Today’s new generation home products have morphed into sophisticated ...

Air flow: 120 m³/h
Diameter: 100 mm
Noise level: 29 dB

... on db(A) but also on the psychoacoustic analysis to ensure the fan’s sound quality. Pleasant to the ears creating a more agreeable environment. Exceptionally High Air Flow! Superior Fan Blade Design! 120 ...

NESTRO fans are the heart of every extraction system - proven, efficient and durable. If the fan is installed on the raw gas side, it blows into the filter system and is referred to as ...

NESTRO transport fans transport the material to be filtered, e.g. in long pipelines or in the event of high volume flow requirements. They support/relieve the burden on the extraction fans.

NESTRO fans are the heart of every extraction system - proven, efficient and durable. If the fan is installed on the clean gas side, it sucks air through the filter system and is referred ...

Air flow: 55 m³/h

The filter fans are required to ventilate your electrical and electronic equipment and protect them from dirt and dust thanks to its integrated filter. They are easily mounted on the side wall of the cabinet. It is ...

Air flow: 110 m³/h

The filter fans are required to ventilate your electrical and electronic equipment and protect them from dirt and dust thanks to its integrated filter. They are easily mounted on the side wall of the cabinet. It is ...

Air flow: 120 m³/h

The filter fans are required to ventilate your electrical and electronic equipment and protect them from dirt and dust thanks to its integrated filter. They are easily mounted on the side wall of the cabinet. It is ...

Air flow: 0 m³/h - 20,710 m³/h
Diameter: 250 mm - 560 mm
Rotational speed: 0 rpm - 3,920 rpm

... simulation technology, reasonably designed flow runner combined with ultra-efficient EC motor create the high efficiency of the fan. [ Low Noise ] The designer closely combines aerodynamics and sound source, and ...

Air flow: 0 m³/h - 12,135 m³/h
Diameter: 280 mm - 560 mm
Rotational speed: 0 rpm - 2,575 rpm

... simulation technology, reasonably designed flow runner combined with ultra-efficient AC motor create the high efficiency of the fan. [ Low Noise ] The designer closely combines aerodynamics and sound source, and ...

Air flow: 0 m³/h - 984 m³/h
Diameter: 160, 133, 146 mm
Rotational speed: 0 rpm - 1,955 rpm

... simulation technology, reasonably designed flow runner combined with ultra-efficient motor create the high efficiency of the fan. [ Low Noise ] The designer closely combines aerodynamics and sound source, and makes ...

Air flow: 2,700, 3,850 m³/h

Portable extraction fan for welding fumes The portable FACILE extraction fan is particularly suited to protecting the operator from fumes and particulate when working ...

Air flow: 100 m³/h - 19,000 m³/h

Centrifugal fans with forward curved blades in galvanised sheet metal Extraction of air which is clean or with a low volume of particulates, exhaust gases, welding fumes, etc. - Structure: The structure ...

Centrifugal fan with forward curved blades in galvanised sheet metal Extraction of air with a low volumes of particulate, exhaust gases, welding fumes, etc. - Structure: The structure of the extraction ...

Air flow: 10,102 m³/h - 77,340 m³/h
Diameter: 26 in - 69 in
Noise level: 62 dB - 74 dB

Exhaust Fans with Steel blades & Galvanized Housing Move and refresh the stagnant air in your tunnel, greenhouse or commercial warehouse to create a healthy and more productive environment. Our exhaust fans ...

Air flow: 26,600 m³/h - 53,600 m³/h
Diameter: 55, 51 in
Noise level: 77, 76 dB

... structure helps to keep dirt and condensation off the fan. In order to achieve a better balance our fans are equipped with two bearings, instead of one. The two bearings are separated by a distantial. The ...

Air flow: 21,356 m³/h - 35,850 m³/h
Diameter: 51 in
Noise level: 75, 72 dB

High Pressure Fan with steel blades & Galvanized Housing Move and refresh the stagnant air in your tunnel, greenhouse or commercial warehouse to create a healthy and more productive environment. Our exhaust fans ...

Air flow: 147.5 m³/h - 925 m³/h
Rotational speed: 2,760 rpm - 2,910 rpm

Centrifugal fan with forward curved blades or open blades for low flow rates and medium and high heads. Suitable for exhaust gas, flue gas and granular material suction. Direct-coupled execution only. Maximum air temperature: ...

Ducted helical fan with nylon-glass impeller and alternatively cast aluminum impeller. Suitable for moving large volumes of air at low pressure even in the presence of dust or fumes. Maximum air temperature: 60°C. Special ...

The ET extraction tower is normally used to draw in large volumes of air with low pressures. Its small size and light weight facilitate installation directly on roofs, either free suction or connected ...

Air flow: 250 m³/h - 3,000 m³/h

Centrifugal exhaust-fans are intended particularly for source - capture and are completely adaptable to the EP Series arm line or with the EG and EK arm series by utilizing an adapter flange. These fans ...

Air flow: 250 m³/h - 3,000 m³/h

The J series of exhaust fans is especially engineered for use in ATEX categorized zones. The fans are manufactured in diverse versions, each optimized for use in zones with dust-prone environs or dust ...