- Hydraulics - Pneumatics >
- Pipe, Tube and Fitting >
- Plastic fitting >
- PREVOST
PREVOST plastic fittings
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
Diameter: 5 mm
Operating pressure: 10 bar
... made of plastics POM and PVDF with the world's most popular profile in this nominal diameter. Above average flow performance for liquid and gaseous media. The coupling system is developed for single-hand ...
Parker Quick Coupling Division
Diameter: 17 mm - 48 mm
Material: PA6 MOD V0 SGA 90° fitting suitable for FIPLOCK® corrugated conduits with fine and coarse profile EPDM fitting gasket self-extinguishing and resistant against ...
FRÄNKISCHE Industrial Pipes GmbH & Co. KG
... made of special FDA-approved Viton®. These fittings do not contain technopolymers, thereby avoiding problems of compatibility with detergents and other chemical agents. This choice of materials allows the fittings ...
Diameter: 10, 6, 4, 8 mm
Operating pressure: -0.99 bar - 16 bar
... Push-in fittings Series F PLUS The family of Push-in fittings for use in the food industry expands with the introduction of two new Series: F-E PLUS and F-NSF PLUS Series. In fact, in addition to the ...
Diameter: 0.375, 0.75, 0.5 in
Operating pressure: 29 psi - 174 psi
With the largest passage diameter in the prevoS1 range and a composite body, the new 11EB coupling is recommended for uses requiring high flow in garages, workshops and for industrial applications. This new coupler is equipped with ...
Prevost
Diameter: 6 mm - 8 mm
Operating pressure: 0 bar - 12 bar
The prevoS1 range of compressed air couplings facilitate the user’s day-to-day work. These quick couplings can be connected and disconnected safely with a single press. Quick and easy tool changes optimise work and efficiency. General ...
Prevost
Diameter: 4 mm - 16 mm
Operating pressure: 0 bar - 10 bar
BSPT male thread R 1/8 Temperature 0°C to + 60°C Construction Polymer and nickel-plated brass
Prevost
Diameter: 6 mm - 8 mm
Operating pressure: 12 bar
The Stäubli ERS quick-release coupling range can be used for fast, direct connection of pneumatic tools. The non-scratch design protects your surfaces and makes the ERS coupling ideal for assembly and finishing workshops. Easy to ...
Diameter: 12 mm - 50 mm
TPR flexible hose fittings As for TPR hoses, we have created a brand new range of RTPR fittings. RTPR fittings from 3/8” to 1” are made with self-extinguishing PVC, while the larger ...
Diameter: 3 mm - 25 mm
Operating pressure: 1 bar - 12 bar
Diameter: 0.13 in - 0.5 in
Operating pressure: 80 bar
Series S2000 pipe fittings are characterized by great reliability of female threads, both BSP and BSPT, with non-flat surfaces. The pantented Sprint models are provided with a particular torque system which avoids the ...
Diameter: 10 mm - 63 mm
Benefits Fast assembly Easy to disassemble High-tensile High sealing performance Can be rotated Application range In combination with protective conduit: SILVYN® RILL PA 6 SILVYN® RILL PA 12 ...
U.I. Lapp GmbH
Diameter: 9 mm - 48 mm
This 90° elbow allows for easy installation, quick assembly, is easy to disassemble, highly-tensile and has high sealing performance. It has a wide application range and is also for applications with limited space, as well as rotating ...
U.I. Lapp GmbH
Diameter: 7 mm - 48 mm
Benefits Fast assembly Easy to disassemble Additional cable strain relief Additional cable sealing Application range In combination with protective conduit: SILVYN® RILL PA 6 SILVYN® RILL PA 12 ...
U.I. Lapp GmbH
Diameter: 0.125 in - 8 in
Female to Female Coupling Fitting of Female to Female Coupling Products Found: 30 Body Material - Thread Size 1 - Thread Size 2 GENERAL TheHAM-LET Pipeline range of connectons is manufacturée! for typical applications ...
HAM-LET
Diameter: 0.18 mm - 0.25 mm
Operating pressure: 2 MPa
Gates® Heater Hose and Fuel Line Connectors use a unique single barb design to provide greater sealability between single or dual inside diameter hoses. Available in straight, 90° elbow and tee shapes - almost any hose configuration can ...
Diameter: 3 mm - 16 mm
Operating pressure: 20 bar
The LF 3000® pneumatic fitting range, with its wide variety of shapes and configurations, allows you to find the perfect connector to meet your needs and thus optimise the use of your equipment. The push-in fitting ...
Parker Legris
Diameter: 12 mm - 50 mm
Manufactured in modified Nylon 12 Nickel plated threads for extra strength Approved for use in Ex e applications for Zones 1, 2, 21, 22 For use with XESX conduit only Product approval ATEX - SEV15ATATEX0121 IECEX - IECEx SEV15.0009 II ...
ABB Smart Power
Weldable Pipe Fittings Furon FuseBond No O-Ring Union Fittings from Saint-Gobain enable a straight pipe to pipe connection with same diameter dimensions, compatible with our "schedule 40" pipe. Utilizing ...
Saint-Gobain Performance Plastics - Process System
Diameter: 12 mm - 108 mm
Operating pressure: 14.5, 43.5, 94.3, 0.3 psi
Flow-optimised press connector system made of copper (99.9 % Cu-DHP), gunmetal or silicon bronze for copper pipes. Press connectors for protecting the sealing element equipped with cylindrical pipe guide. Press connectors from d64.0 ...
Viega GmbH & Co. KG
Diameter: 0.13, 0.06, 0.09 in
Operating pressure: 0 psi - 125 psi
Swivel fittings connect tubing to a threaded hole. The barb (and tubing) can be freely rotated from the base. An integrated sealing bead provides a convenient and cost effective seal against the mating part. Barbed connections ...
AIR Logic
Diameter: 0.125, 0.09, 0.06, 0.17 in
Operating pressure: 0 psi - 125 psi
Swivel fittings connect tubing to a threaded hole. The barb (and tubing) can be freely rotated from the base. An integrated sealing bead provides a convenient and cost effective seal against the mating part. Barbed connections ...
AIR Logic
Diameter: 0.125, 0.09, 0.06 in
Operating pressure: 0 psi - 125 psi
Swivel fittings connect tubing to a threaded hole. The barb (and tubing) can be freely rotated from the base. An integrated sealing bead provides a convenient and cost effective seal against the mating part. Barbed connections ...
AIR Logic
Diameter: 12, 6, 30 mm
Operating pressure: 12 bar
Plastic couplings in PVDF for various gaseous and fluid media Media: water, compressed air, diverse fluids, fuel, lubricating greases / oils, technical gases Materials: polyamide (PA), polyvinylidenfluoride (PVDF), ...
Walther Präzision
Diameter: 6, 19, 50, 25, 32 mm
Operating pressure: 5 bar
The couplings are machined completely from PVDF (Polyvinylidene fluoride); mainly used in the chemical industry, where traditional materials are not sufficient Media: diverse fluid Materials: PVDF, POM, locking balls and springs ...
Walther Präzision
Diameter: 6, 9, 11 mm
Operating pressure: 12 bar
... tool side Media: compressed air Materials: coupling housing: aluminium hardcoated locking sleeve: impact resistant plastics Special features / Options: Compressed air coupling in very light design for use ...
Walther Präzision
Normative Regulation : According each coupling regulation Sizes : According your requierments Coupling Material : Stainless Steel , Carbon Steel PTFE coated & PTFE lining (PFA & ECTFE on request) Black Conductive ...
Diameter: 0.5 in - 12 in
Operating pressure: 10 bar - 40 bar
Normative Regulation : EN 14 420-4 Coupling Material : Stainless Steel, Carbon Steel (other on request) PTFE – PFA or CTFE Coated on request Working Pressure : (ANSI 150 LBS and 300 LBS on request) Connection Mechanism ...
Diameter: 19 mm - 40 mm
Operating pressure: 12 bar
Normative Regulation : Design according Sandblast standards (Claw distance : 58 mm) Coupling Material : Malleable Iron , Nylon Gasket Material : NBR Connection Mechanism : Connecting/Turning one coupling into the other one
Diameter: 3 mm - 25 mm
Operating pressure: 10 bar
NORMAPLAST® SV products are proven plastic hose and pipe connection components that create secure, reliable and affordable connections in lines used for transporting media. NORMAPLAST® SV hose and pipe connectors are ...
NORMA GROUP
Diameter: 16 mm - 110 mm
... with makes your life easy: no need to dismantle the fitting to install or uninstall, and all the components remains into the nut. Thanks to this high integrity, there are no falling parts from the fitting ...
FIP - Formatura Iniezione Polimeri
Diameter: 20 mm - 63 mm
... of transition fittings with element brass threaded molded in the polypropylene body, suitable to join hydraulic equipment and threaded metal pipes with polyethylene pipes from d 20 up to d 63 mm. The ...
FIP - Formatura Iniezione Polimeri
Diameter: 16 mm - 125 mm
Operating pressure: 16 bar
PVC-U Series of fittings designed for conveying fluids under pressure with a cold chemical weld jointing system (solvent welding) using a suitable solvent cement and cleaner-primer. PVC-C Series of fittings ...
FIP - Formatura Iniezione Polimeri
Diameter: 40, 50 mm
Operating pressure: 4 bar
Patented system for swimming pools Removable and easy to assemble: fast connection, quick assembly time, no drying time, no protection measures required Assembly options: on FlexFit® hose, on rigid PE pipe, or on rigid PVC-U ...
Praher Plastics Austria GmbH
Diameter: 14 mm - 66 mm
Operating pressure: 10 bar
Connections - hoze nozzle – male thread Approvals - EURASEC Hygienic Certificate, GOST Certificate, Rostehnadzor Permission
Praher Plastics Austria GmbH
Diameter: 10 mm - 63 mm
Operating pressure: 16 bar
Connections - solvent spigot – hose nozzle Approvals - EURASEC Hygienic Certificate, GOST Certificate, Rostehnadzor Permission
Praher Plastics Austria GmbH
Diameter: 6.5 mm - 44 mm
The IVG conduit fittings are made of specially modified polyamide 6, thermoplastic elastomer and nickel-plated brass. The materials are halogen, phosphor and cadmium-free.The IVG conduit fittings feature ...
MURRPLASTIK SYSTEMTECHNIK
Diameter: 6.2 mm - 19 mm
Operating pressure: 0 Pa - 3,500,000 Pa
Series 141 miniature couplings are specially designed for dental and medical equipment applications. Among the smallest couplings available today, Series 141 features valved couplings and valveless nipples that are easily connected with ...
CEJN
Diameter: 0.5 in
Operating pressure: 16 bar
TECHNICAL DATA Material Body and thrust ring: nickel plated brass Thread Metric, taper and parallel Seal NBR rubber Clamp Stainless steel AISI 316 Size M5 ÷ G 1/2 Fluid Air, water, oil, steam Working temperature - 20 ÷ +70 ...
Diameter: 28, 10, 22, 15 mm
Operating pressure: 10 bar
... of equal sizes JG Speedfit equal straight connector push-fit fitting for the connection of two equal pipe sizes. Simply push the push-fit fitting fully onto the pipe and twist the plastic ...
JOHN GUEST
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining