- Power Transmission - Mechanical components >
- Bearing and Linear Guide >
- One-way bearing clutch >
- RINGSPANN
RINGSPANN one-way bearing clutches
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
Torque: 70 Nm - 2,300 Nm
Diameter: 25 mm - 110 mm
Rotational speed: 160 rpm - 600 rpm
... for low to mid-speed and middle load applications. Features ・Uses a cam and roller structure where rollers serve as a bearing, allowing for a more compact design. ・Pre-lubricated with grease. ・No lubrication maintenance ...
Torque: 54 Nm - 2,440 Nm
Diameter: 50.8 mm - 114.3 mm
Rotational speed: 300 rpm - 1,800 rpm
... groove ball bearing with snap ring in outer race locating in recess dia. D. The outer race of the clutch is tapped for attaching sprocket, gear or ratchet arm Intended primarily for indexing applications, ...
Cross & Morse
Torque: 53 Nm - 1,695 Nm
Diameter: 16.5 mm - 56 mm
Rotational speed: 1,800, 2,500, 2,000 rpm
... outside diameter is the same as 62 series ball bearing enabling simple fitting beyond the bearing on intermediate or output shafts of gearboxes. Bore sizes range from 16.5 mm to 56 mm for operation alongside ...
Cross & Morse
Torque: 13 Nm - 35,500 Nm
Rotational speed: 200 rpm - 6,200 rpm
... have bearing support with the shaft in order to provide the necessary concentricity within the clutch. The tolerance of the housing bore 'D' should be H7 or G7, and the shaft h6 or j6. ANR Clutches The ...
Cross & Morse
Suitable for all small machine applications where compact dimensions are required Grease lubricated and sealed for life, offering reliability with maintenance-free duty Dimensional interchangeability with other leading manufacturers ...
RENOLD
Torque: 0 Nm - 36,600 Nm
All clutches are fitted with high precision heavy duty bearings for arduous duty applications Clutch sizes 300 to 700 are fitted with ARO sprags to resist vibration and high transient torques and overloads SO ...
RENOLD
Diameter: 0 in - 20 in
... heavy duty bearings for arduous applications SH clutches designed for LONGLIFE and lower overall operating cost Able to accommodate LARGE BORES (up to 20") and HIGH TORQUE CAPACITY within compact design Dimensionally ...
RENOLD
Torque: 9 Nm - 420 Nm
Diameter: 12 mm - 40 mm
Rotational speed: 3,000 rpm - 10,000 rpm
Internal Freewheels FZ are sprag freewheels with bearing support and ball bearing properties. The freewheels are supplied grease-filled for normal operating ...
Torque: 8 Nm - 2,400 Nm
Diameter: 8 mm - 80 mm
Rotational speed: 800 rpm - 3,925 rpm
Internal Freewheels FDN is used by pressing on the outer ring with sprags, available in three types. The ring offers internal Free wheels FDN are sprag free wheels with anti-friction bearing dimensions. Freewheels ...
Torque: 18 Nm - 3,000 Nm
Diameter: 8 mm - 60 mm
Rotational speed: 800 rpm - 3,000 rpm
The Internal Freewheels FNR are used for keyway connection on the outer ring and include rollers and a bearing for support. These roller freewheels ranging from size 8 to 20 include ...
Diameter: 70 mm
... it to be used even in contact with delicate surfaces (avoids damage, scratches, marks) Equipped with two 2RS watertight bearings which guarantee excellent smoothness and stability. Available with flat (orange) and ...
Diameter: 34, 45, 50 mm
... does not stain or damage the product; - high stiffness combined to high mechanical/impact resistance thank to co-molded bearing; - reduced friction with excellent performance and ease of rolling; - the conical roller ...
Torque: 0.9 Nm
... (8 pound inch capacity), economical, fully journaled clutch, for use when axial space is at a minimum, but long life is paramount. The Polyclutch Shell-Pak is a fully automatic over-running clutch that ...
Torque: 0.5 Nm - 2.8 Nm
Rotational speed: 4,500 rpm - 7,000 rpm
... D-Series, but which are installed in your housing. The clutch has near zero backlash & allows high overrunning speeds, making them ideal for machines requiring overrunning, backstopping, freewheeling or one-way ...
Torque: 55, 93, 130 Nm
Diameter: 52, 62, 47 mm
Rotational speed: 4,200, 6,000, 5,200 rpm
The CKN series is a freewheel incorporating a 62.. series bearing, self-centring, grease-lubricated and comes with water protection This model is equipped with a keyway on the inner race and should be ...
Torque: 2.5 Nm - 325 Nm
Diameter: 8 mm - 40 mm
Rotational speed: 3,000 rpm - 15,000 rpm
The UK..ZZ series is a freewheel incorporating a 62.. series bearing. The self-centring freewheels are already greaselubricated and come with dust-proof protection For the UK..ZZ model, ...
Torque: 9.3 Nm - 325 Nm
Diameter: 12 mm - 40 mm
Rotational speed: 3,000 rpm - 10,000 rpm
The UK..2RS series is a freewheel incorporating a 62..series bearing. The self-centring freewheels are already grease lubricated and come with water protection For the UK..2RS model, ...
Torque: 0.08 Nm - 0.98 Nm
... ball bearing technology, we were able to develop and design these one-way clutches with features such as a built-in clutch element integrated into a molded design. We can apply this technology ...
TOK Europe GmbH
Torque: 0 Nm - 156,000 Nm
Diameter: 180 mm - 300 mm
Rotational speed: 70 rpm - 1,300 rpm
The RSCI 20-130 series by Stieber is a Backstop clutch which comes with an inner race rotating. This tool is ideal for freewheeling. The bearing must be provided in an operation to ensure ...
STIEBER
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining