RINGSPANN torque limiters
Torque: 4,000 Nm - 50,000 Nm
... unique design of our Torque-Limiters provides reliable, consistent, and repeatable operation. Shaft-mounted to the generator shaft, our compact, bi-directional wind turbine Torque-Limiters ...
Torque: 6.8 Nm - 339 Nm
... of the torque limiter. Torque values can be changed in the field. However, the torque limiter must be disassembled and replaced with different ...
"D" Type overload clutches are designed to mount on CAMCO index drives with large dial mounting surfaces. The dial plate rests directly on the index drive output flange, providing stability and accuracy.
Torque: 0.1 Nm - 2,800 Nm
Diameter: 11 mm - 128 mm
Torque limiter with conical clamping bushing Material: Safety system: hardened steel Clamping ring: size 1.5 – 10 aluminium Conical clamping bushing: size 15 – 2500 steel Temperature range: -30° ...
Torque: 0.1 Nm - 2,800 Nm
Torque limiter with simple keyway connection Material: Safety system: hardened steel Temperature range: -30°C to +120° C (-22° F to +248°F) Design: With DIN 6885 or ANSI B17.1 keyway. Safety ...
Torque: 5 Nm - 1,800 Nm
Diameter: 47 mm - 160 mm
Torque limiter with clamping hub Material: Safety system: hardened steel Clamping collar: up to size 500 – aluminium size 800 and up – steel Tempertaure range: -30° C to +120° C (-22° F to +248° ...
... overload when the load exceeds a preset loads on the torque limiter to protect the equipment and the index drive. Features Mounted on the output shaft of CA series index drives, CAT series torque ...
... important device, torque limiter has been utilized. Torque limiter is mounted with output shaft to protect the index drive safely from the overload. Features YF ...
... important device, torque limiter has been utilized. Torque limiter is mounted with output shaft to protect the index drive safely from the overload. Features Mounted ...
Torque: 23,000 Nm
... required slip torque, even when already installed. These torque limiters have been constructed to allow easy adaptation to a wide variety of operating conditions, not only for frequent ...
jbj Techniques Limited
Torque: 0.3 Nm - 5,000 Nm
Diameter: 1.02 in - 7.08 in
Rotational speed: 180 rpm - 2,000 rpm
... shaft of high-speed precision intermittent indexing devices.The TF series features accurate torque transmission and operating characteristics. TF-type torque limiters are also easy to ...
Sankyo America
Rutschnabe RT: RT-slip hubs protect against damage by: overload, shocks and machine jams RT-slip hubs must be protected against oil and grease. It is necessary to check the functions from time to time.
Torque: 66, 117.16 ft.lb
Rotational speed: 1,750 rpm
MECHANICAL FRICTION TORQUE LIMITER – NEMA FRAME Overload Protection Between Motor and Gear Box or Other Flanged Components Operation Continuously engaged friction torque limiter ...
Mach III Clutch, Inc.
Torque: 0.05 Nm - 0.4 Nm
Diameter: 18 mm
Rotational speed: 0 rpm - 2,000 rpm
... 2,000 min-1 (RPM) • Long life cycle • Low torque fluctuation due to rotational speed, temperature and humidity changes • Low backlash (Minimum torque difference between starting torque ...
TOK Europe GmbH
Torque: 5 Nm - 120 Nm
Diameter: 36 mm - 46 mm
... construction Shipbuilding Aviation Automotive industry Assembly industry Delivery information The torque limiters are set to the desired disengagement torque at the factory. Adapters ...
Torque: 0.3 Nm - 400 Nm
Diameter: 30.1 mm - 152 mm
China Torque Limiters manufacturer, Chinese Torque Limiters supplier, produce: Torque Limiters, Friction Torque Limiters, ...
... an overload occurs and at the exact torque limit you set. When the overload condition is corrected, the clutch resets at the exact cycle point and torque at which it released.The ORC Series Trig-O-Matic ...
Torque: 2.5 Nm - 1,000 Nm
Torque: 0.5 Nm - 470 Nm
Diameter: 6 mm - 54 mm
Rotational speed: 2,000 rpm - 3,000 rpm
Torques 0,5–470 Nm Properties with integrated ball bearing successfull standard torque limiter Applications/Specific features toothed belt drives the drive element does not need ...
ENEMAC
Torque: 10 Nm - 600 Nm
Diameter: 59 mm - 160 mm
high torque transfer despite compact dimensions special solutions on request negligible wear due to special friction lining frictional torque transmission transmitted torque ...
Maschinenfabrik Mönninghoff GmbH & Co. KG
Torque: 0.3 Nm - 111 Nm
This torque limiter that is manufactured in China is capable of protecting the mechanical equipment, or its work, from damage caused by mechanical overload. The unit ranges on torque ...
-HYDRAULIC ENGAGE -QUICK DISENGAGE AT MAXIMUM TORQUE REACHED -VARIABLE SETTING TO THE MAX. TORQUE DESIRED -POSSIBILITE TO WORK AS LOCKED COUPLING WITHOUT TORQUE LIMITED -NO WEAR OF ...
Torque: 0 Nm - 1,220 Nm
... Series 54L torque limiters prevent overload damage in an installation by slipping at an adjustable preset torque. These compact units are a simple construction and are easy to adjust. ...
Torque: 0.1 Nm - 2,800 Nm
Diameter: 3 mm - 100 mm
SNT
Torque: 15 Nm - 85 Nm
Magnetic Particle Torque Limiters Easy to integrate torque limiting clutches into any type of system, achieving fast response time, very reproducible slipping torque ...
... actuation for overload detector switch Variety of Models for all applications Standard & custom torque settings Rigid, Backlash-Free design CAMCO Output Overload Clutches are recognized ...
Torque: 0.1 Nm - 14 Nm
Versatile torque limiters that allow conventional hand and power tools to be easily converted into torque tools
Torque: 10 Nm
Torque Limiter for FPC 6665 Item number 6665.027 Slip clutch for FPC holder, preset to 10 Nm Product features and benefits: With SW 4 and 6.35 mm hex drive, ...
(CT9602) The KATO Torque Limiting Clutch-Drive was designed with one goal in mind: to prolong the life of your air tool mandrels and prevent breakage under excessive torque. Note: The Clutch Drive is ...
Torque: 10 Nm - 1,250 Nm
Diameter: 63, 85, 128, 170 mm
... asbestos free, organic material Version:Torque limiter Product description:at the torque limiters, torque is transmitted through friction ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining