Rohde tube connectors

... application. Its design takes into account the tube materials that are being joined, the wall thickness and the diameters of the tubes. It is both an approved and certified system for the joining of metallic ...

Diameter: 10 mm - 18 mm

... from Furtwangen provides a wide assortment of tube clamp connectors, clamp mountings and linear actuators. These tools are all mainly built out of stainless steel and aluminum. Its tube ...

Diameter: 20 mm - 50 mm

The clamping bores of the two-way connector clamps GN 133 are mechanically machined and designed for construction tubings GN 990 or DIN 2391, DIN 2395 and DIN 2462 respectively. The standard clamping screws are socket ...

Diameter: 30 mm - 40 mm

The clamping bores of the two-way connector clamps GN 135 are not machined and specially designed for construction tubings GN 990 or DIN 2391, DIN 2395 and DIN 2462 respectively. The square designs are also suitable ...

90° connector 90° connector Parallel connector 45° connector Strut D28L, 45° Cross connector Product attributes - ESD - yes Packaging unit ...

... ground. Screws and nuts electro zinc-plated. On request: Clamping levers for tightening.Accessory:- Round and square tubes K0493

... and nuts electro zinc-plated.Note:The standard size for round tubes is Ø18 mm or Ø30 mm. Use reducer sleeves K0492 if smaller tubes are to be clamped or a conversion from round to square tubes ...

Diameter: 30 mm - 40 mm

Material: Stainless steel, investment cast 1.4308. Screws, stainless steel A2. Version: Electropolished. On request: Clamping levers for tightening.

... hexagon socket and nut. The geometry of the holes of MSX. series connecting clamps are designed to fit both tubes with round cross section and tubes with square cross section; the latter prevents the ...

... monodimensional two-way connector. - 2A-2W: bidimensional two-way connector. - 2A-3W: bidimensional three-way connector. - 2A-4W: bidimensional four-way connector. - ...

Diameter: 10 mm - 18 mm

... black colour. FEATURES AND APPLICATIONS The assembly holes of GN 131 connecting clamps allow an excellent match with tubes GN 990 (see page 1368). The clamping screws d3 may be replaced by clamping kits GN 911 (see ...

Diameter: 40 mm

The RV-BR tube connectors in this product series can be used for various applications in the industry and come with a design that adds durability. In terms of the material, the chill casting is made of ...

Diameter: 30 mm

Tubular connectorss RV Material: Chill casting of high-grade aluminium alloy in accordance with DIN 1725. Surface treatment: - Rough state - Drum polished - High-gloss polished - Vibratory ground, dull finished and technically ...

Diameter: 30 mm

Tubular connectors RV are made up of chill casting high-grade aluminium alloy that passed the DIN 1725 requirement. It has a rough state, drum and high-gloss polished. Furthermore being powder-coated, it also has vibratory ...

These inserts are fitted with a central bore for square tubes and the connectors are available in two parts that hold together when fitted. C1 is for black nylon material, C2 is for nylon with metal core ...

Diameter: 20 mm - 200 mm

... movement compensation: Rubber-metal pipe connectors dampen noise and vibration caused by appli- ances, motors or pumps. Movement cannot be absorbed by these rubber- metal pipe connectors. Fixed ...

MCN Series Y-connectors are designed to meet all connector needs with a variety of applications. Various sizes and materials are available from flexible PVC to more rigid polycarbonate. ...

Diameter: 40 mm

... due to assembly of prefabricated components - Flexible - easy to assemble / disassemble / reuse - Stable - high-strength internal clamping mechanism - Versatile - available for round and square tubes - ...

Diameter: 40 mm

Innovative connection technology for stainless steel tube connectors! A clever stainless steel assembly system (EMS) for rack constructions in the food industry and in clean rooms Stainless steel ...

Diameter: 40 mm

... new joint sleeves, which can be combined with all ITAS elements and 40 mm tubes, still only standard tools are required. Product benefits of the adjustable ITAS tube connectors: • ...

Diameter: 12 mm - 50 mm

Tube clamps T-angle, aluminium Material: Cast aluminium. DIN 7984 screws and DIN 985 nuts steel. Version: Vibratory ground. Screws and nuts galvanized. On request: Levers for locking and other diameters. Accessory: - ...

Diameter: 12 mm - 20 mm

... The tube clamps with diameters 30 and 40 mm have a silicone coating on the female thread that protects the thread of the hex head screw from contamination and damage. On request: Levers for locking. Accessory: - Round ...

Diameter: 30 mm

Tube clamps straight, aluminum with ball joint Product description: Straight tube clamps are used for axial joints. They can be screwed onto machines or frames. The tube clamps have ...

Diameter: 20 mm - 60 mm

... types of drawn/ground rods or electro-welded tubesThe tubes, due to their ovalization characteristics, may not be easily fitted. In this event, you will have to bore the hole to calibrate the tube/connector ...

Diameter: 20 mm - 30 mm

... ground rods or electro-joined tubes. The tubes, due to their ovalization characteristics, may not be easily fitted. In this event, you will have to bore the hole to calibrate the tube/connector ...

Diameter: 10 mm - 60 mm

... ground rods or electro-joined tubes. The tubes, due to their ovalization characteristics, may not be easily fitted. In this event, you will have to bore the hole to calibrate the tube/connector ...

Diameter: 28 mm

Description For a 90 degree connection of two tubular frames with diameter Ø 28mm; with pre-centering Material Die-cast aluminum Surface Plain Installation Set Incl. mounting material: screw M6 x 25, nut M6 Pack Quantity 10 pieces

► Spe­cial fea­tures In­te­grated vac­uum con­nec­tion Vac­uum (bar) -0.8 Com­pressed air con­nec­tion

Diameter: 8 mm - 10 mm

Diameter: 12 mm - 18 mm

Diameter: 20 mm - 50 mm

Diameter: 15, 20, 25, 30 mm

Tube connectors 20x20 wall thickness 1,5 PA, black (with steel core)

Diameter: 15, 20, 25, 30 mm

Tube connectors for square and rectangular tubes - with steel core. In PA, colour black

Diameter: 19 mm - 60 mm

Tube connectors for round tubes - with steel core. In PA, colour black

PANOZZO SRL produces pvc and pipe fittings. Our catalogue in fact ranges from thread protection devices to plastic tube plugs and plastic tube caps, also including sealing plug for the ...

Diameter: 20, 25, 30, 32 mm

PANOZZO SRL produces pvc and pipe fittings. Our catalogue in fact ranges from thread protection devices to plastic tube plugs and plastic tube caps, also including sealing plug for the ...

PANOZZO SRL produces pvc and pipe fittings. Our catalogue in fact ranges from thread protection devices to plastic tube plugs and plastic tube caps, also including sealing plug for the ...

Diameter: 10 mm - 18 mm

... of the clamping points are offset in the plane and arranged at an angle of 90°. They receive typically available rods and tubes with full surface contact over the entire cross-section of the bore. At the screw points, ...

Diameter: 12 mm - 20 mm

... of the clamping points are offset in the plane and arranged at an angle of 90°. They receive typically available rods and tubes with full surface contact over the entire cross-section of the bore. At the screw points, ...

Diameter: 10 mm - 18 mm

... at the clamping point is arranged in the plane parallel to the face of the flange. It receives typically available rods and tubes with full surface contact over the entire cross-section of the bore. At the screw point, ...

Diameter: 6 mm

... the temperature-controlled M&C hose/tube connectors T...-H1 and V...-H1 are used to connect heated sample lines type 3/4/5-N/M/H at an operating temperature of up to 180 °C. Electrically heated union ...

... the temperature-controlled M&C hose/tube connectors T...-H1 and V...-H1 are used to connect heated sample lines type 3/4/5-N/M/H with an operating temperature of up to 180 °C. Electrically heated, straight ...

... employments from 3 way tubes to simple right angle 2 way versions. We stock these Round / Square Tube Connectors in a range of industry standard sizes and tube diameters ...

Diameter: 3 mm - 15 mm

X tubing connector, four-way connector to connect hoses. - PP, Temperature resistant up to +135°C max. - PVDF, Temperature resistant up to +160°C max., highly resistant to chemicals - Sterilisable

Connectors Type T General features ✔ Electrolytic copper (EN 13600). ✔ Electrolytic tin-plating process. ✔ Funnel entry.

DOUBLE STEEL JOINT MaterialGalvanized Steel Weight 485 g Item 2 bis

SIMPLE NYLON JOINT MaterialNylon Weight90 g Item2

Diameter: 33 mm

Parallel connector for Tube System Material: zinc-plated steel Color: black Packaging Unit: 5 pcs. Extras: For 5 connections

Diameter: 33 mm

To connect two pipes at an angle of 90° Material: zinc-plated steel Color: black Packaging Unit: 5 pcs. Extras: For 5 connections

Diameter: 33 mm

Connector 90° 1-fold. Material: Zinc-plated-steel Color: Black Packaging Unit: 10 pcs. Connector / Pack unit