Schubert & Salzer stainless steel valves

DN: 15 mm - 300 mm
Pressure: 1.6, 2.5, 4 MPa
Temperature: -29 °C - 180 °C

... ball valve is mainly used to cut off or connect the medium in the pipeline, and can also be used for the regulation and control of the fluid. The hard-sealed V-shaped ball valve has a strong connection ...

Pressure: 315 bar - 500 bar
Temperature: -20 °C - 120 °C

DN: 15 mm - 50 mm
Pressure: 0 bar - 13 bar
Temperature: -10 °C - 180 °C

Functioning Body material Stainless Steel CF8M (Aisi 316) ACTUATOR Stainless Steel CF8 (Aisi 304) Pipe Size G1/2” – G3/4″ – G1″ – G1 1/4″ – G1 1/2″ – G2″ SEAL PTFE PIPE ...

DN: 8 mm - 200 mm
Pressure: 0 bar - 100 bar
Temperature: -50 °C - 305 °C

... / SW / Tapped Options Heating jacket Sight Glass Check valve Electrical continuity Advantages Face to face: ISO5752-S01 (Flanged) Face to face: EN 12982 (BW/SW – stainless steel ...

Pressure: 17, 20 bar
Temperature: 210, 220 °C

The GD-30 and GD-30S are compact, high-performance direct-acting valves. Economical to buy and use, it is ideal for those low- to moderate-flow applications where accuracy of +/- 10% is acceptable. The GD-30 and GD-30S ...

DN: 50 mm
Pressure: 16, 40 bar
Temperature: -40 °C - 180 °C

FOCUS-1 is developed for the process industry and features a integrated control valve, flowmeter, pressure and temperature sensors combined with extensive computing power in one single device. DESIGNED FOR HIGHEST ...

DN: 15 mm - 200 mm

... very reinforced coating, non-standard installation length, stainless steel valves for operation in the corrosive environments, with the stem extension up to 3 meters high or more. Ball ...

DN: 150 mm
Pressure: 10 bar - 16 bar
Temperature: -20 °C - 90 °C

... epoxy-coating 80μm disc: - stainless steel 1.4408 actuation: - notch lever with grey sleeve approval: - EPDM for water DW-6201CR0174 nach DIN EN 1074-1/-2 (Operating range - 20 °C to +90 °C) installation ...

DN: 20 mm - 100 mm
Pressure: 25, 40 bar
Temperature: -20 °C - 80 °C

Fully welded steel ball valve, reduced bore, for natural gas transmission and distribution, BW ends, with handle.

DN: 15 mm - 400 mm

... efficiency by saving energy when opening or closing a gate valve Material Selection for Gate Valves Carbon Steel (A105-WCB, WCC) Low Temperture Carbon Steel (LF2-LCC, ...

DN: 2 in - 24 in
Pressure: 4.6 bar - 153.2 bar
Temperature: 38 °C - 450 °C

... Standards compliance: API 6D, BS 5351, ASME B16.34, DIN 3202 or equivalents » Materials: Cast or Forged Carbon Steel, Stainless Steel, Duplex or Other Specials » Ends Connections: ...

DN: 2 in - 72 in

Valves, Gaskets, Screws Pipes (seamless and welded) - Heat Exchanger Tubes - Elbows - Reducers - Tees - Flanges - Bends - Special items as per drawing - Valves and Actuators - Any other Piping ...

DN: 50 mm - 1,200 mm

... pipeline system; 2.This gate valve requires smaller space and knife gate valve can effectively increase the pipeline strength and reduces possible vibration. 3.Valve disc made of ...

DN: 15 mm - 65 mm
Pressure: 6 bar - 8 bar
Temperature: -15 °C - 225 °C

Body in microcast stainless steel CF8M/316 Actuator in stainless steel AISI 304 Normally-closed, normally-open, double-effect function Seal in modified PTFE or PEEK Packing ...

Pressure: 2,500 psi
Temperature: 0 °C - 320 °C

The Pressurizing Valve is designed to be used with Pressurized Aging Cells. 316 stainless steel pressure valve, certified for 2500 psi (17,237 kPa)

DN: 15 mm - 200 mm
Pressure: 16 bar - 40 bar
Temperature: -40 °C - 100 °C

Two-way control valves with one-seat design A. Hock Series 2000 valves are our two-way control valve all-rounders. Available in both standard and more complex versions, the valves ...

DN: 10 mm - 200 mm
Pressure: 16 bar - 160 bar

Wafer type ball valve is a flange end 1pc ball valve with super-short one piece body design, has short distance between the valve seat and the end flange, less medium retention, superior ...

Pneumatic Ball Valve Pneumatic Stainless Steel Ball Valve

DN: 8 mm - 150 mm
Pressure: 10 bar - 40 bar
Temperature: -196 °C - 300 °C

... Testing standard: API 598;EN 12266 Design ANSI B16.34,API6D,BS5351,DIN3337 Body Material Carbon Steel, Stainless Steel, Alloy Steel, Duplex Steel.etc. NACE ...

DN: 2, 3, 5, 6 in
Pressure: 2,000, 3,000, 5,000, 7,500 psi

... API6A Demco DM Mud Gâte Valve or Mud Valve is engineered for the rigorous requirements of abrasive and erosive service conditions in oilfield applications, such as mud, cernent, fracturing and water ...

DN: 150 mm - 300 mm

... fabricated steel body caters for sizes and specials that fall outside the standard 150, 200, 250 and 300mm cast iron body range as well as offering stainless steel construction. Optional ...

DN: 0.5 in - 8 in
Pressure: 0 bar - 20 bar
Temperature: -50 °C - 250 °C

Split body • Full Bore • Anti blow out stem • Autoadjustable packing • Self-relief seats • Low emission design Standards • Designs: ANSI B16.34 ISO17292 API6D • Face ...

DN: 40 mm - 600 mm

Concentric electric butterfly valve / soft seal with resilient seat/low torque design Features Soft seal butterfly valve  - Body type: wafer or lug  - Body material: Ductile iron, SS304(CF8), ...

... Piston Valve is suitable for water fluid operation due to its condensed design, quick response and free water hammer. The Angle Piston Valve is cost effective and durable compared to ball valve. ...