Schuler production presses

Force: 40 tf - 300 tf
Stroke: 500 mm
Hydraulic pump power: 7.5 kW

... based on individual customer requirements. Completely built in Europe for high reliability Designed for testing or batch production Possibility of Industry 4.0 integration Customized solution available Made in ...

Force: 40 tf - 300 tf
Stroke: 500 mm
Working speed: 9 mm/s

... based on individual customer requirements. Completely built in Europe for high reliability Designed for testing or batch production Possibility of Industry 4.0 integration Customized solution available Made in ...

Force: 500, 200, 300 tf
Opening: 400, 450, 350 mm
Stroke: 150 mm

Frame structure: whole welded frame structure through annealing process, enhances high strength and rigidity; Ram cylinder structure: built-in auxiliary cylinder, fast dry run speed, enhances high productivity; Oil tank: located ...

Force: 300 tf
Opening: 1,000 mm
Stroke: 450 mm

Frame structure: welded frame structure made of high quality steel plate and annealing process, confirm the elastic deformation in maximum pressure through finite element analysis, guiding of moving bolster by eight-face linear guide ...

Force: 0.5 kN - 50 kN
Stroke: 80, 100, 200 mm
Working speed: 414, 280, 100 mm/s

... Ideal for Cell Production Designed especially for cell production and research facilities, result display, control mechanism, pressing mechanism, C-frame and pair of operation switches are all included ...

Force: 0.5 kN - 120 kN
Opening: 66 mm - 220 mm
Stroke: 80 mm - 400 mm

... functionality contributes to higher production quality Load Display Precision: ±0.8% (FS)＊1 Repeatability: ±0.005mm＊2 ＊1 Value at 5% or more of maximum pressing capacity under constant environmental conditions. ＊2 Value ...

Force: 80 kN
Stroke: 100 mm - 450 mm
Working speed: 50 mm/s - 216 mm/s

... by choosing only the options that meet your usage needs. Touch Panel Interface For Servo Press View and analyze process parameters and graphs; comprehensive press control at your fingertips. The JP-S2 ...

... 16092 came into effect on September 19. 2021 and SCHMIDT Technology will deliver only EC-type examination approved press workstations. Press workstations equipped with two-hand safety will be furnished ...

Force: 100, 36, 3, 15 kN
Opening: 200, 125, 75, 175 mm

aiPRESS servo presses are used to produce safe and reproduceable joinings. They offer optimal possibilities in customising the joining process to your needs. Process factors such as feed force, running speed, positioning time and accuracy ...

Force: 200 kgf
Opening: 54 mm - 200 mm
Stroke: 0 mm - 50 mm

... adapted to specifications and production constraints. Thanks to its design office and a fleet of more than 40 machining centres, EMG can design and manufacture any modification or special presses on request, as well ...

Force: 400 kgf
Opening: 35 mm - 270 mm
Stroke: 0 mm - 80 mm

... adapted to specifications and production constraints. Thanks to its design office and a fleet of more than 40 machining centres, EMG can design and manufacture any modification or special presses on request, as well ...

Force: 360 kgf
Opening: 20 mm - 250 mm
Stroke: 0 mm - 50 mm

... indicated with a pressure of 6 bars and is proportionally adjustable as standard from 3 to 6 bars. The ergonomics of the press has been thought out to keep the operator comfortable at his workstation even during repetitive ...

Force: 200 kN - 2,000 kN

... cooling down to room temperature under pressure. PRESS SYSTEM FOR THERMOPLASTIC COMPOSITES CONSOLIDATION Pinette PEI. equipment is the perfect fit for your consolidation process. Our compression press ...

Force: 0 kN - 40,000 kN

... operators. THERMOFORMING PRESS LINES Our thermoforming production lines are designed to reach the highest quality standards and use first class components, selected only from internationally ...

Force: 10,000, 40,000 kN
Stroke: 1,500, 2,000 mm
Working speed: 1 mm/s - 70 mm/s

... in its ability to design and manufacture state-of-the-art press systems. That is why we are proud to present you the new generation of compression press: the ECS PRESS. This multi-process ...

Opening: 500 mm

Hydraulic press MECAMAQ “C-Frame PCC series” useful for industrial applications who requires center-loads useful for broad range of operations such as, forming, punching, bending or other industrial applications. Hydraulic ...

Opening: 500 mm

Hydraulic press MECAMAQ “C-Frame PCC series” useful for industrial applications who requires center-loads useful for broad range of operations such as, forming, punching, bending or other industrial applications. Hydraulic ...

Opening: 500 mm

Hydraulic press MECAMAQ “C-Frame PCC series” useful for industrial applications who requires center-loads useful for broad range of operations such as, forming, punching, bending or other industrial applications. Hydraulic ...

Description Two floors press with 4 or more cylinders, short stroke and movement (single or double). This press has been specifically studied for the production of low profile and high ...

Force: 5 kN
Stroke: 40 mm
Table width: 60 mm

... white, red Advantages: - Height adjustment of press head by threaded spindle - High output power with moderate input force - Accuracy thanks to precise ram guidance - Accurately machined press ...

Force: 5 kN
Stroke: 40 mm
Table width: 60 mm

... white, red Advantages: - - Height adjustment of press head by threaded spindle - - High output power with moderate input force - - Accuracy thanks to precise ram guidance - - Accurately machined press ...

Force: 5 kN
Stroke: 40 mm
Table width: 60 mm

... white, red Advantages: - - Height adjustment of press head by threaded spindle - - High output power with moderate input force - - Accuracy thanks to precise ram guidance - - Accurately machined press ...

Force: 2,000, 3,000, 1,000 kN
Rate (strokes/min): 150 p/min - 400 p/min
Stroke: 1,500, 1,300, 1,200 mm

... tilting-table - mighty fast and quiet! In the last few years, die casting has developed rapidly - this means that the trimming press in the cell is becoming increasingly important. While in the past the die casting process ...

Force: 3,000, 1,000, 2,000, 500 kN
Rate (strokes/min): 150 p/min - 400 p/min
Stroke: 1,500 mm

• Ideal solution for tall parts and parts with large volume • Loading and removal possibilities from four sides • Robust, strongly dimensioned guiding columns • All possibilites of flash removal by variable space beneath base platen • ...

Force: 100 tf
Opening: 650 mm
Stroke: 450 mm

... automated production lines. We design this hydraulic C-frame press with an upper- and lower table with T-grooves. The upper table ensures a perfect alignment by means of four cylindrical lateral guides ...

Force: 150 kN
Stroke: 250 mm
Table width: 550, 500 mm

Our 150 ton production press is suitable for stamping, die-cutting, deep-drawing and forming. This hydraulic press can be incorporated in automated production lines as ...

Force: 80 kN
Stroke: 450 mm
Table width: 400, 550 mm

This 80 ton hydraulic C-frame press is designed to carry out tasks involving deep-drawing, stamping and forming in medium and high volumes. Also suitable to incorporate in automated production lines. Designed ...

Force: 800 kN
Rate (strokes/min): 150 p/min
Stroke: 75 mm - 127 mm

... preconditions for tooling technologies in parallel operations in the fields of blanking, drawing or trimming. The modular press design makes it possible to easily implement the technical parameters as required in the ...

Force: 1,250 kN
Rate (strokes/min): 120 p/min
Stroke: 250 mm

... and idle times can be reduced as well. Advantage in technology: Maximal tonnage available along the entire stroke range Press forces can be distributed within the die Arbitrary stroke locations and stroke heights, ...

Force: 1,250 kN
Stroke: 200 mm

Multi-purpose blanking and forming press to be used for a variety of dies. Automated blanking and forming system: Incl. roller feed Manufacture of blanking and forming parts for sports and leisure industry, the car ...

Force: 150, 70, 100, 40 tf
Stroke: 500 mm
Table width: 900, 1,500, 1,050 mm

Hydraulic press suitable for straightening sheet metal, assembling and dismantling electric motors and more generally for any assembly operation. The PBM hydraulic workshop press is equipped with a ...

Force: 150 tf - 400 tf
Working speed: 3, 2 mm/s
Approaching speed: 20 mm/s

Electric and hydraulic hybrid press specifically designed for high precision sheet metal straightening and deformation operations with significant energy savings. – Electrical movements to reach the sheet metal with ...

Force: 400, 300, 200 tf
Stroke: 500 mm
Working speed: 7, 5, 8 mm/s

Hydraulic press with mobile upright designed for straightening tubes and round metal profiles. The PRT electro-hydraulic press consists of an upper frame which slides along the main base of the press ...

Force: 12 tf

Pressfitting. Muffler pressfitting one or two stations. Description and Technical data Models: DP 800, DP 1200 • One station unit • Work power 12 Ton • Distance range table/mace from 700 mm min. to 2000 mm max. • Working stroke ...

Ridge-Locking (mechanical blocking). Simultaneous ridge-locking horizontal mode one station or two stations. Description and Technical data Models: DCR 70, DCR 70/2 • Simultaneous ridge-locking horizontal mode one station or two ...

Force: 100, 150, 50, 200 tf
Opening: 1,250 mm
Stroke: 400 mm

In addition to its adjustable down table mechanism, its t-slot table allows it to be mounted and processed on many different types of workpieces. In this way, most of the sheet metal forming operations can be done with the SDT model ...

Force: 200 tf
Opening: 750 mm

We Produce Special Order Workshop Presses Together with you Our Products are According to Customer Oriented Please Don't Be Hesitate to Contact us to Share Your Needs #HidrokarPres export@hidrokarpres.com +90 542 414 7737

Force: 5 tf - 35 tf
Opening: 520 mm
Stroke: 520 mm

E-FORM X2 is the most flexible of the range. As compact as a single automation allows you to deal with large and small production series. Each working station is independent, but supervised by a single controller. The ...

Force: 5 tf - 35 tf
Opening: 0 mm - 520 mm
Table width: 500 mm - 500 mm

... a compact design for forming small series, excellent for prototyping. Its dimensions allow for easy placement within the production area. The silence, derived from the exclusive use of the electric motor rather than the ...

Force: 196.1, 20, 40, 50, 80 kN
Opening: 0 mm - 550 mm
Stroke: 0 mm - 500 mm

... Each piece produced is the same as the previous one: once the right combination of parameters has been found, there are no production scraps with a consequent reduction in material waste.

Force: 294.2 kN
Opening: 150 mm

... ° C •*** Maximum press area diameter: 250 mm •*** Stroke distance: 150 mm •*** Adjustable pressing force of 0-30 tons, •± 30 kg force accuracy, •Temperature accuracy ± 2 ° C, •Ability to read continuously applied ...

Force: 49 kN - 490.3 kN

... range of manual presses and accessories to suit your specific applications. The manually operated oil-hydraulic laboratory press makes pressing pellets of various materials faster with a high reproducibility. Features Hardened ...

Force: 880 kN
Opening: 196 mm
Max. pressure: 250 bar

... a determined type of parts, with fast die changeover and the robustness of the Neotecman models. PUNCHES - 1 vertical PRODUCTION (empty) - From 500 to 6.000 parts/hour BAR DIAMETER - From 12 to 32 mm (From 0.47 to ...

Force: 980 kN
Opening: 200 mm
Max. pressure: 250 bar

PRESS PUNCHES - 3 horizontal PRODUCTION (empty) - From 500 to 3.600 parts/hour BAR DIAMETER - From 12 to 32 mm (From 0.47 to 1,26 in) BAR LENGTH - To 4.000 mm (To 2.65 lb) DIE DIMENSONS 205 x 205 ...

Force: 980 kN
Opening: 500 mm
Max. pressure: 250 bar

... for press and furnace, that includes the assembly of a robot to offer a multiple billet positioning in the press, simetric billets, diferent orientations or multiple billets at the same time. PUNCHES ...

Force: 10,000 kN

ODEN-Flexible, a hydraulic press available in many different configurations allowing for a wide ODEN-F is a flexible hydraulic four-column press that is available in many different configurations. This ...

For the production of large batches. This machine has three handling stations through which up to 24 press units can be moved stepwise by means of a round table. Station 1: For removal of the finished ...

... independently operating production units serving a common press station. Output at a 5-second press-cycle results in more than 500 pads per hour. Automatic short-cycle press, ...

For all production machines and procedures we offer laboratory presses that can be used in product development. All process-relevant production steps proceed identically to those on the production ...

Force: 2.5 tf - 2.5 tf

... pressure, the Triform model 24-5FC fluid cell sheet hydroforming press is one of the most versatile models available on the market today. Ideal for low-volume, high-mix production, this press ...

Force: 0.5 tf - 0.5 tf

Fully Configurable Servo-Electric Presses Available in 9 Standard Models. Standard Features: - Positional repeatability within +/-0.0005” - Force & positional feedback - Data acquisition measuring torque, force, position, & time ...

Force: 0.5 tf - 1 tf

Fully Configurable Servo-Electric Presses Available in 9 Standard Models. Standard Features: - Positional repeatability within +/-0.0005” - Force & positional feedback - Data acquisition measuring torque, force, position, & time ...

Force: 996.4, 1,494.6, 498.2, 797.1 kN
Opening: 250 mm

Specifically designed to perform work involving deep-drawing, stamping, die-cutting, forming. It consists of an electro welded structure made solely of S355JR steel. They are stabilised and machined at the end of the structural welding ...

Force: 498.2, 797.1, 996.4, 1,494.6 kN
Opening: 250 mm

Specifically designed to perform work involving deep-drawing, stamping, die-cutting, forming. It consists of an electro welded structure made solely of S355JR steel. They are stabilised and machined at the end of the structural welding ...

Force: 797.1, 996.4, 1,494.6 kN
Opening: 450 mm

Specifically designed to perform work involving deep-drawing, stamping, die-cutting, forming for medium and high volumes. It consists of an electro welded structure made solely of S355JR steel. They are stabilised and machined at the ...