- Materials - Tools - Components >
- Lubrication >
- Cutting oil >
- Setral
Setral cutting oils
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
Viscosity: 0.000016, 0.000023 m²/s
Flash point: 180, 200 °C
... Improvement to operators health due to almost no carcinogenic compounds as polycyclic aromatic hydrocarbons present in the oil. Reduced oil mists and less product consumption through evaporation, due ...
Operating temperature: -3 °C - 240 °C
... biodegradable-based neat cutting lubricant VALONA MS 7010 BIO is a vegetable oil cutting oil designed for turning, drilling, tapping, grinding and honing on ferrous ...
Viscosity: 0.000035 m²/s
Vegetable oil for dough dividers and bread cutting machines. Finaturol K2 is a 100% vegetable oil guaranteed GMO free and made without animal products, guaranteed palm oil ...
Viscosity: 0.000025 m²/s
... replace depleted additives in a wide variety of honing and cutting oils. (Mixing LT9X in a one-to-one ratio with mineral oil makes a formulation similar to MB-30 Honing Oil.) ...
Our soluble cutting oils are designed to help you reduce coolant use and meet your machining needs. Castrol’s high-performance soluble cutting oils ...
CASTROL Industrial
Klübercut CO 6-102 is a metal-working oil. It is environmentally compatible and can be used for metal cutting and punching processes. This high-quality metalworking oil is not miscible ...
Klüber Lubrication
Pour point: -6 °C
Flash point: 250 °C
MaXtreme oil is a pure oil with marked ecological characteristics, formulated with natural base components. It is formulated specifically for Minimum Quantity Lubrication systems, and it is ideal ...
High-performance cutting fluid for producing thread connections or cutting metal. The 5 liter canister is ideally suited for using the cutting fluid with stationary machines. Permitted ...
Viscosity: 0.000022 m²/s
Pour point: 175 °C
Non-water-miscible cutting oil for lubricating and cooling tools and workpieces during machining work on metals. Areas of application Drop lubrication of cutting tools at machining ...
OKS Spezialschmierstoffe GmbH
Viscosity: 0.000022 m²/s
Pour point: 175 °C
Non-water-miscible cutting oil for lubricating and cooling tools and workpieces during machining work on metals. Areas of application Drop lubrication of cutting tools at machining ...
OKS Spezialschmierstoffe GmbH
Operating temperature: -50 °C - 200 °C
Viscosity: 0.002 m²/s
Pour point: 280 °C
... only. Silicone based plastics, e.g. silicone rubber could be affected through the silicone oil. At sliding areas with pure oxygen the application of silicone oil is not allowed. Industries No matter ...
OKS Spezialschmierstoffe GmbH
... -washable High-Performance Cutting Oil is used in cutting- and machining processes, for the non-aggressive drilling, cutting, punching and milling of steel, casting materials, ...
Excellent lubricating strength. Continuous lubrication during processing. Very high refrigerating power: eliminates distortion and faults caused by heating. It contains E.P. (extreme pressure) additives for an effective anti-sticking ...
arexons
Operating temperature: -20 °C - 110 °C
... & ISO 21469 certified for full audit compliance HALAL Certified Kosher Certified May be used as a food safe tapping or cutting fluid Vegan Trademark registered MOSH/MOAH Free High performance versatile food grade ...
Metal Cutting Lubricant Spray · Suitable for all ferrous metals. · Fast and convenient application. Aerosol applied metal cutting lubricant consisting of a concentrate of extreme pressure additives. Applies ...
... a revolutionary approach to maximising cutting fluid sump life, minimising fluid disposal and reducing costs. For optimum performance the TRI-Logic cutting fluids should be used with TRI-Logic VG68 ...
Viscosity: 0.000151, 0.00022, 0.000321, 0.000461 m²/s
Extreme pressure with no chlorine. Versatile. Enhanced degreasability. Meets the Renault specifications. Cutting & pressing operations.
Pour point: -48, -42, -33 °C
Flash point: 286, 246 °C
Synthetic refrigeration oils based on special polyolesters with anti-wear additives for use with the refrigerant CO2 (subcritical and transcritical applications). Also suitable for HFC / FC refrigerants. DIN 51503: ...
Semi-synthetic cutting fluid for cutting and rectification operations on all kinds of metals (steel, copper, aluminum, stainless steel, etc.). This cutting fluid provides a significant ...
Biodegradable cutting oil. Natural straight oil, free of chlorine, for cutting operations in ferro, non-ferro and aluminium. Cools by transferring heat away from cutting ...
REMS Spezial – high-alloyed mineral based thread-cutting oil, can be washed out with water. High lubricating and cooling effect. High-alloyed mineral based thread-cutting oil. ...
REMS
SAFECUT AERO 405 is a special micro-emulsion, free from formaldehyde and boron, developed for difficult machining operations on all metals where surface finish is important. The product is very suitable for milling, turning, sawing and ...
UNIL LUBRICANTS
Very stable colourless fully synthetic coolant fluid for all machining of steel, copper, cast iron, stainless steel and aluminium. This liquid is suitable for both soft and hard water. Benefits Excellent anti-foaming ...
UNIL LUBRICANTS
Viscosity: 0.000941 m²/s
... transformer oil containing additives, suitable for light deep drawing of thin sheet steel and compression cutting of all kinds of steel. This cutting oil is also suitable ...
UNIL LUBRICANTS
... & lubricating during metal cutting and grinding applications. APPLICATIONS: Cutting, grinding (30:2 - 50:1 water to oil), grinding of ferrous metals, grinding of non-ferrous metals, ...
CRC Industries
Drilling and cutting oil bottleArt.No.: WS-70-100WS 70 is a thread cutting agent for all metals with high cutting ...Have you seen ...? Drilling and cutting ...
Flash point: 71, 38 °C
... preventive materials designed to protect metal surfaces from rust and corrosion. They are formulated using light-bodied petroleum solvents with polar rust preventive, water displacement and fingerprint neutralising additives. ...
ExxonMobil Lubricants & Petrol Spec
free of HP additives medium proportion of HP and wear protection additives high proportion of HP and wear protection additives high proportion of HP and wear protection additives (Gas to liquid)
Blaser Swisslube
A complete range of neat oils intended for machining by swarf removal, for all metals. Neat oils for machining, based on highly refined mineral oils. Very large choice of viscosities ...
CONDAT
Synthetic special oil for forming processes Application Especially developed for the lubrication of forming processes like deep drawing, stamping, cutting of steel, stainless steel and non-ferrous ...
Flash point: 41 °C
MOLYDAL
Operating temperature: 40 °C
Viscosity: 9.8, 40, 2.7 m²/s
... metal material cutting, shaping, drilling, milling, turning and grinding processing。 Is a kind of highly efficient for minimal quantities of lubricant oil, especially suitable for aluminum, tin, copper, ...
Boer Technolog Co., Ltd.
Viscosity: 0.00022 m²/s
HYTAP is a high performance tapping and drilling oil for demanding machining processes. The product is suitable for all materials and applications. • Particularly suitable for tapping and cutting processes • ...
Oemeta Chemische Werke GmbH
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining