- Materials - Tools - Components >
- Lubrication >
- Long-life lubricant >
- Setral
Setral long-life lubricants
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
Operating temperature: 290, 292, 283 °C
Viscosity: 0.000008 m²/s - 0.000323 m²/s
... volatility and good detergent properties provide life time improvement and reduction of lubrication frequency. Must be applied on clean chains to get an optimum result. The reduction of lubrication ...
TotalEnergies Lubrifiants
Viscosity: 0.000099 m²/s - 0.00068 m²/s
Pour point: -15 °C
Flash point: 230, 238, 234, 242 °C
... oils, these mineral oils, in conjunction with LubAnac's oil analysis service, improve oil change intervals and extend gearbox life. These mineral oils, for mechanisms subject to high variations in torque and vibration, ...
TotalEnergies Lubrifiants
Viscosity: 0.00032, 0.000035 m²/s
Pour point: -42 °C
Flash point: 233 °C
Full synthetic gear oil for wind turbine's main gearbox. Proven 10-year operating life Suitable for both onshore and offshore wind turbines regardless of the power rating Excellent stability in the presence of ...
TotalEnergies Lubrifiants
Operating temperature: -40 °C - 204 °C
Intended for high-load, low-speed applications, Timken’s Construction and Off-Highway Grease offers resistance to extreme pressures caused by shock loading and protects against rust and corrosion. This grease provides extended protection ...
Operating temperature: -30 °C - 140 °C
... grease. Features & benefits * Excellent lubrication at peak temperatures up to 220 °C (430 °F) for short periods * Protection of wheel bearings operating under severe conditions * Effective lubrication ...
SKF Maintenance,Lubrication and Power Transmission
Operating temperature: -50 °C - 110 °C
... fully synthetic oil based grease using lithium soap. Its thickener technology and low viscosity oil (PAO) provide excellent lubrication performances. Suitable for low temperatures to –50 °C (–60 °F) and extremely high ...
SKF Maintenance,Lubrication and Power Transmission
Operating temperature: -40 °C - 260 °C
... suitable for applications at extremely high temperatures from 200 °C (390 °F) up to 260 °C (500 °F). Features & benefits • Long life in aggressive environments such as very reactive areas with a presence ...
SKF Maintenance,Lubrication and Power Transmission
Operating temperature: -30 °C - 120 °C
... gears, ball bearings, roller bearings, plain bearings, pivot pins, anchor cables, and hoist line.Operating temperature for long-term lubrication: from -30°C / -22°F to +120°C / +248°F. Quantity 0.400KG
Operating temperature: 10 °C - 150 °C
16 kg pail 160 kg drum Applications Used in applications where noise reduction and damping are desired, including in driveshaft spline connections to reduce engagement feedback. Also suitable for applications where reducing noise ...
Dow Corning
... to help you reduce coolant use, pro long system life and meet your machining needs when working with a wide range of materials like aluminium, cast iron or other ferrous alloys. Developed to overcome ...
CASTROL Industrial
Operating temperature: -20 °C - 150 °C
Flash point: 0 °C
Operating temperature: -20 °C - 180 °C
Flash point: 0 °C
Operating temperature: 160 °C
AMBLYGON TA 30/1 and TA 30/2 are long-term and high-temperature lubricating greases based on mineral oil and polyurea. These lubricating greases are used for long-term ...
Klüber Lubrication
Today’s vehicles need a motor oil that keeps pace with their changing demands and does more to improve performance and engine life. This is why Shell came up with an entirely new way to produce synthetic base oils, made ...
Shell Lubricants
Operating temperature: -20 °C - 130 °C
Viscosity: 0.000185, 0.000014 m²/s
Pour point: 200 °C
... high-pressure long-life grease for lubrication points subjected to pressure or impacts also under outdoor exposure. Areas of application For harsh operating conditions Advantages ...
OKS Spezialschmierstoffe GmbH
Operating temperature: -25 °C - 150 °C
Viscosity: 0.00022 m²/s
... and benefits Highly effective due to optimum solid lubricant formula Broad range of uses above normal grease performance areas Reduced maintenance and lubricant costs due to possible safety lubrication Technical ...
OKS Spezialschmierstoffe GmbH
Operating temperature: -10 °C - 160 °C
Viscosity: 0.00049, 0.000032 m²/s
... impact loads Economical due to optimised formula Enables wear reduction, decreasing failure times and enabling long-term lubrication Long-acting, highly adhesive, temperature-stable ...
OKS Spezialschmierstoffe GmbH
... colourless, odourless lubricant with a high PTFE content. 1 Litre, Box 20 Bottles - Protects with its PTFE-ACEITE film the applied point and due to its high adhesion to metal surfaces prevents wear and ensures a longer ...
Operating temperature: -45 °C - 232 °C
Flash point: 220 °C
... synthetic NLGI Grade 2, heavy-duty, multi-purpose lubricant with Syncolon® (PTFE). Synthetic base fluids and the addition of Syncolon® (PTFE) micro powders combine to form a premium lubricant that provides ...
Synco Chemical Corp
Operating temperature: -30 °C - 260 °C
Viscosity: 0.00033, 0.00003 m²/s
Berutox VPT 64-2 is a noise damping long-term lubricating grease designed for the food, automotive and supply industries. Due to its outstanding performance, Berutox VPT 64-2 is used in demanding applications ...
CARL BECHEM
Operating temperature: -30 °C - 230 °C
Viscosity: 0.00021, 0.00002 m²/s
Berutox VPT 54-2 is a noise damping long-term lubricating grease for the reduction of friction and wear at high temperatures. Berutox VPT 54-2 is suitable for all approved sliding speeds in grease lubrication ...
CARL BECHEM
Operating temperature: -30 °C - 230 °C
Viscosity: 0.00021, 0.00002 m²/s
Berutox VPT 54-1 is a noise-reducing long-life grease for reducing friction and wear at high temperatures. Berutox VPT 54-1 is suitable for all permissible sliding speeds in grease lubrication ...
CARL BECHEM
Operating temperature: -50 °C - 160 °C
Excellent oxidation stability resulting in extended relubrication intervals and a reduction in lubricant usage. Excellent all round, long life lubricant for improved ...
Operating temperature: -15 °C - 160 °C
... registered MOSH/MOAH Free FOODLUBE Ultra is a beige, highly adhesive, non-toxic, lubricant designed for effective lubrication of designed for the effective lubrication of slides, ...
... TRI-Logic ALX has excellent inherent stability providing a long and predictable sump life. • Provides excellent residual corrosion protection. • Prevents built-up edge and extends tool life ...
Viscosity: 0.000012, 0.000067 m²/s
Pour point: -46 °C
Flash point: 230 °C
100% Synthetic lubricant with Low SAPS technology suitable for diesel and petrol engines with particulate filter (G.P.F.: Gasoline Particulate Filter and D.P.F.: Diesel Particulate Filter). This lubricant ...
Operating temperature: 15, 40, 100 °C
Pour point: -15 °C
Flash point: 220, 230 °C
... oils acc. to DIN 51515-1: TDP and DIN 51515-2: TGP. For the lubrication of steam and gas turbines, generators, turbo compressors, pumps and transmissions. Furthermore used as lubricating and barrier ...
Operating temperature: -30 °C - 120 °C
... adhesive, protects from wear even under extreme conditions, very resistant to water wash-out from metallic surfaces, long-term lubrication of passenger cars and commercial vehicles, construction industry, ...
Forced penetration lubricating grease, long lasting, suitable for all moving parts. The high quality of the formulation ensures long-lasting and effective lubrication ...
Operating temperature: 20 °C - 25 °C
... Anti-Rust Oil provides effective long-term corrosion protection, efficiently protecting machine parts and metals from environmental impacts, such as water or air, during machining processes and storage. Reliable long-term ...
... Indoor protection up to 6 months. Multipurpose corrosion inhibitor with water repellant and lubricating properties. Forms a thin, almost invisible and long-lasting protective film against water and ...
Operating temperature: -30 °C - 160 °C
... °C. Provides long-term lubrication with extreme pressure resistance. NLGI classification 2. Protects against corrosion in wet or saturated environments. Excellent extreme pressure performance. Extends ...
Operating temperature: -40 °C - 180 °C
High pressure lubricant. Synthetic NLGI 2 grease, highly charged with extreme pressure additives. Highly stable with long service life. Excellent water resistance. Functional over ...
Operating temperature: -30 °C - 224 °C
Viscosity: 0.000014 m²/s - 0.000105 m²/s
... dispersion properties to counteract the soot formation. A perfect anti-wear protection prolonging engine’s life. A unique engine lubrication in all weather conditions.
Viscosity: 0.000045 m²/s
... aluminium and steel and its alloys. Starcut E 20 has a high mineral oil content. Benefits Low-foaming. Extended tool life. Suitable for heavy machining of stainless steel, titanium and aluminium. Very ...
Viscosity: 0.000109 m²/s
Lukoil Lubricants GmbH
... Shredder Oil, Lube and Protectant, – Keeps Shredder Blades Working – Runs Smooth and Quiet – Precision Cut and Longer Life – Ideal for Cross-cut & Micro-cut Shredders
Operating temperature: -60 °C - 232 °C
... and metals. Use on fine parts mechanisms, i.e. clocks, watches, miniature moving parts, etc. Non-gumming, rust-inhibiting, long-lasting lubrication.
Operating temperature: 0 °F - 250 °F
... Grade 2 lithium based grease. Provides superior lubrication & durability in any weather and most temperatures. It is a versatile grease designed for light duty applications requiring a long grease life. ...
Operating temperature: 0 °C - 220 °C
High quality compressor oils of the type VDL DIN 51506. Produced from specially selected solvent raffinates with outstanding aging resistance and proven additives. Suited for use in all air compressors with compression end temperatures up to 220 °C.
BIZOL
Operating temperature: -25 °C - 210 °C
Viscosity: 0.000046 m²/s
BIZOL Pro HLP Hydraulic Oils are used as pressure fluids in hydraulic systems. They contain ingredients which raise the levels of aging stability, corrosion protection, and EP characteristics. Due to special additives they meet all requirements ...
BIZOL
Operating temperature: -30 °C - 190 °C
Viscosity: 0.000032 m²/s
BIZOL Pro HLPD Hydraulic Oils with outstanding EP characteristics and excellent aging and corrosion protection stability. Due to their special additives they are capable of absorbing certain amounts of water without clouding, and without ...
BIZOL
Pour point: -45, -42, -39 °C
Flash point: 204, 192, 197 °C
... compressor oil life • High performance synthetic base stocks with high viscosity index enables wide temperature range capability and effective lubrication at high temperatures • High load carrying ...
ExxonMobil Lubricants & Petrol Spec
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining