SKF Lincoln pumps
Flow: 0.01 l/min
Pressure: 38 bar
The ECP is designed to lubricate bearings and linear guides with oil or fluid grease. The pump works reliably in single-line systems of up to 20 lubrication points and a main line length of approximately 15 meters. It ...
Flow: 0.1, 0.2, 0.5 l/min
Pressure: 30 bar
MKx gear pump units include a pressure-regulating valve and pressure-relief valve. Electrical pressure monitoring is performed by an integrated pressure switch, and fill-level monitoring also is possible. These units ...
Flow: 8, 14, 24 l/min
Pressure: 0 bar - 400 bar
Head: 120 m
The ZPU 08/14/24 pumps are used primarily in dual-line systems or as supply pumps and have a maximum operating pressure of 400 bar (5800 psi). Depending on the system layout, these electric pumps ...
Flow: 0.00008 l/min - 0.0042 l/min
Pressure: 0 bar - 350 bar
The high-pressure, multi-line pump can supply lubricant directly to lubrication points or can be used as a centralized lubrication pump in large-sized progressive systems. It can drive up to five elements, ...
Pressure: 240 bar
... allows mobile equipment to remain idling with pump power on, but the timer is deactivated, allowing manual lubrication functionality. All pumps include low-level and system fault alarms. Simply mount ...
Pressure: 0 bar - 240 bar
... consists of a pumping unit and a lid set. EPUMP-XXX-ECO coding is referring to ECO lid sets (descending pump head with follower plate), which are suitable for greases in NLGI grades 1 and 2. EPUMPXXX-STA ...
Flow: 0.8, 1.6, 3.2 l/min
Pressure: 400 bar
... operated piston pump for dual-line or progressive systems The ZPU 01/02 high-pressure, high-volume pumps can be used as a supply pump for small to midsize dual-line ...
Flow: 0.015 l/min - 0.45 l/min
Power: 180 W - 370 W
Fluid temperature: 10 °C - 40 °C
... lubricity for the pump to lubricate itself. Some of these distribution pumps require an attached, single-circuit priming pump that operates separately. The priming pump ...
Flow: 0.85 l/min - 50 l/min
Pressure: 20 bar - 50 bar
Head: 1,000 mm
... positive-displacement pumps with fixed displacement and high efficiency. They are suitable for a variety of applications, such as hydraulic, hydrostatic, cooling as well as oil circulation and total-loss lubrication systems. ...
Pressure: 205 bar
... lubrication points can be supplied via an SSV metering device with fixed output amount and can be monitored directly from the pump. The unit’s integrated, all-in-one system concept reduces installation time and costs. Features ...
Your suggestions for improvement:
Receive updates on this section every two weeks.