- Power Transmission - Mechanical components >
- Mechanical Transmission >
- Transmission coupling >
- Voith Turbo
Voith Turbo transmission couplings
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
... minimizes coupling and end piece wear and retains tooth integrity. Predictable shear properties allow for component protection. Zero backlash and no moving parts enable silent operation. Designed for specific VW and ...
Gates® EuroGrip® Flexible Couplings are developed to transmit torque to drive engine accessories and to dampen vibrations between two connected shafts, they relieve the stress that would result from a rigid coupling ...
Torque: 4 Nm - 2,080 Nm
Rotational speed: 3,000 rpm - 28,000 rpm
... . ROBA® -ES couplings connect shafts in highly dynamic servo drives. They transmit torques elastically and backlash-free. Single-jointed couplings (type 940.___) compensate for axial and angular misalignment, ...
Torque: 1.28 Nm - 294.97 Nm
Rotational speed: 3,150 rpm - 25,400 rpm
... Zero backlash, clamping style for torque transmission. Torque capacity of hub depends on bore size. Clamping Hub With Single Slot With Keyway (CWK) – Zero backlash, clamping style with keyway for torque transmission. ...
Torque: 10,000 Nm - 160,000 Nm
Rotational speed: 1,040 rpm - 2,100 rpm
... the RATO DS coupling transmits the torque primarily by shear stresses which have a pre-dominant radial/circumferential component. Benefits Compared to pure torsional or conventional misalignment couplings ...
VULKAN Marine
Torque: 1,000 Nm - 560,000 Nm
Rotational speed: 1,200 rpm - 8,000 rpm
DENFLEX is a rigid coupling for uniform torque transmission. The tooth gear profile enables high torque to be transmitted even in the smallest dimensions. DENFLEX also compensates axial, radial and angular ...
VULKAN Marine
Torque: 150 Nm - 17,560 Nm
Rotational speed: 3,100 rpm - 19,500 rpm
... High speed and torque transmission Small sizes Low weight Maintenance free High torsional stiffness Low axial and radial reaction forces Alternative to flexible coupling This is a suitable alternative ...
VULKAN Marine
Torque: 382 Nm - 429,000 Nm
High torque transmission capacity type ・Capable of transmitting 1.5 to 3 times the AS Series rated torque capacity. ※With self-centering function. No need for the hassle of machining on hubs for guide portions. ※There ...
Tsubakimoto Chain
Torque: 5 Nm - 1,170 Nm
... bolts, so no additional lubrication is necessary during assembly. ・Available from small shaft diameters. Provides more transmission torque than the KE-SS Series.
Tsubakimoto Chain
Torque: 0.4 Nm - 711 Nm
This light-duty flexible coupling is ideal for direct connections of general-use motors. It is simply constructed of two hubs and one insert. Superior for secure torque transmission and vibration/impact ...
Tsubakimoto Chain
Torque: 0.25 Nm - 250 Nm
Rotational speed: 0 rpm - 10,000 rpm
The Single Flex SA2 version of the Servoflex SFC series impresses with its extremely high torsional stiffness combined with possible compensation in axial and angular direction. Due to the light and high-strength aluminum alloy it has ...
Miki Pulley Europe AG
Torque: 0.25 Nm - 250 Nm
Rotational speed: 0 rpm - 10,000 rpm
The Double Flex DA2 version of the Servoflex SFC series impresses with its high torsional stiffness including a possible compensation function in axial, parallel and angular direction. Due to the light and high-strength aluminum alloy, ...
Miki Pulley Europe AG
Torque: 2 Nm - 400 Nm
Rotational speed: 3,500 rpm - 40,000 rpm
The ASK sliced coupling is the ideal way to compensate all types of misalignment. Their unique slot structure is the best solution for non-aligned shafts or highly resonant installation situations. One-piece production ...
Miki Pulley Europe AG
Torque: 0.18 Nm - 50.7 Nm
Rotational speed: 30,000, 45,000, 35,000 rpm
... connecting two shaft ends. The MIC-5 (double-element coupling) also provides compensation for radial misalignment. On demand, MIC Series Couplings are available in an electrically isolated version, ...
Torque: 15 Nm - 450 Nm
Rotational speed: 0 rpm - 10,000 rpm
BKC - Metal Bellows Couplings provide the ideal complement to Magtrol’s TM/TMB/TMHS/TS In-Line Torque Transducers and Sensors, when these are to be mounted in a drive train. The torque transmission element ...
Torque: 30 Nm - 6,000 Nm
Rotational speed: 0 rpm - 10,000 rpm
DESCRIPTION_ BK2 Series Metal Bellows Couplings provide the ideal complement to Magtrol’s s TM / TMB / TMHS / TS In-Line Torque Transducers and Sensors, when these are to be mounted in a drive train. The torque transmission ...
Torque: 130 Nm - 7,600 Nm
... connection of shaft ends • No weakening of shafts by feather keys • No fretting corrosion as with keyway connections • Transmission of torques and axial forces • Typical applications: Connection of shaft sections ...
Torque: 15.817 Nm - 51,860.03 Nm
Rotational speed: 1,000 rpm - 3,000 rpm
Schmidt Offset Shaft Couplings offer great flexibility in shaft displacement while maintaining constant torque transmission, angular velocity, and phase relationship. Schmidt offset couplings ...
Torque: 62 Nm - 4,022 Nm
Schmidt Inline Couplings - L400 Series Schmidt Inline Couplings are a torque-rigid type, designed with two pairs of parallel links installed 90 degrees out of phase with each other. This linkage arrangement ...
Torque: 28.24 Nm - 440.64 Nm
Rotational speed: 2,500 rpm - 6,300 rpm
... misalignments than clamp style couplings and can handle larger shafts and higher torques. Using Control-Flex Couplings will help extend the operational life of your encoder and guarantee accuracy. Bolted-Style ...
Torque: 48 Nm - 36,450 Nm
Rotational speed: 1,500 rpm - 7,000 rpm
Hub-hub couplings with rubber elements for shaft-shaft coupling of both driving and driven machines by means of taper bushes already machined with cylindrical bore and keyway. Compared to the GC series, ...
AB TRASMISSIONI SRL
Torque: 48 Nm - 36,450 Nm
Rotational speed: 1,500 rpm - 7,000 rpm
Couplings with rubber elements to couple the flywheels of endothermic engines with the shafts of driven machines by means of a flange-hub connection with a taper bush already machined with a cylindrical bore and keyway. ...
AB TRASMISSIONI SRL
Torque: 48 Nm - 36,450 Nm
Rotational speed: 1,500 rpm - 7,000 rpm
Hub-hub couplings with rubber elements to couple both driving and driven machines with shaft ends.
AB TRASMISSIONI SRL
Torque: 78 Nm - 23,780 Nm
Rotational speed: 1,060 rpm - 6,000 rpm
Features - Simple in construction - Power transmission through high tensile bolts - Highly stiff rubber Bushes are capable to bear the shock load - Rubber bushes remain unaffected from water, oil or dust & suit to temperature ...
... angular - Dampens vibrations & torsional oscillations in drive - No lubrication required as there is no relative motion between coupling parts - Easy tyre replacement without dismantling driver or driven position - Available ...
Features - Sustain very high torque rating - Suitable for high speed applications - Heavy duty design with flexibility - Counters all types misalignment i.e. axial, parallel & angular & large axial movement capacity - Suitable for high ...
Torque: 10 Nm - 2,400 Nm
Rotational speed: 2,800 rpm - 14,000 rpm
The couplings are equally suited to horizontal or vertical shaft applications, providing positive power transmission and absorbing torsional, vibration and impact loads. The standard elastomeric ring ...
Cross & Morse
Torque: 33 Nm - 7,000 Nm
Rotational speed: 100 rpm - 7,700 rpm
The coupling consists of two machined cast iron hubs connected by an elastomeric gear ring. Available in 8 basic sizes, with torque capacity to 3300 Nm, the KE coupling provides positive power transmission ...
Cross & Morse
Torque: 18 Nm - 36,000 Nm
Rotational speed: 2,100 rpm - 12,000 rpm
... servomotors. The well balanced all steel construction enables transmission of high torques at high shaft speeds, as encountered on turbine drives. Crossflex Disc Couplings Three hub designs as well ...
Cross & Morse
Torque: 200 Nm - 110,000 Nm
Rotational speed: 1,300 rpm - 4,200 rpm
... rubber disc coupling for internal combustion engine drives * Very high torsional flexibility with a linear torsional deflection characteristic * High torsional vibration and shock load absorbing capability * Backlash-free ...
REICH-KUPPLUNGEN
Torque: 100 Nm - 10,000 Nm
Rotational speed: 1,800 rpm - 10,000 rpm
... * For use up to TKN depending on the application TOK COUPLING SYSTEM General technical description The technical data applies only to the complete coupling or the corresponding ...
REICH-KUPPLUNGEN
Torque: 62 Nm - 100,000 Nm
Rotational speed: 750 rpm - 9,000 rpm
... offers a large variety of different types so that a suitable coupling is available for almost every type of power transmission requirement. For sizes up to and including MMS 63 the coupling ...
REICH-KUPPLUNGEN
Torque: 3,900 Nm - 44,200 Nm
Rotational speed: 3,400 rpm - 4,100 rpm
The new SGFlex-LC coupling system covers the torque range between our SGFlex-3F and TENBEX-ECO coupling systems. The SGFlex link assemblies inside the coupling work with seperate link ...
Torque: 210 Nm - 3,240 Nm
Rotational speed: 3,500 rpm - 7,200 rpm
... is where the new SGFlex®-3FF with the well-established Tenpu® fiber technology comes in. This coupling can also be used for elastic torque transmission in other vibration sensitive drives, for example ...
Torque: 1,000 Nm - 560,000 Nm
Rotational speed: 1,200 rpm - 8,000 rpm
DENFLEX is a rigid coupling for uniform torque transmission. The tooth gear profile enables high torque to be transmitted even in the smallest dimensions. DENFLEX also compensates axial, radial and angular ...
VULKAN Industry and Energy
Torque: 150 Nm - 660,000 Nm
Rotational speed: 1,600 rpm - 22,500 rpm
... and torque transmission Small sizes Low weight Maintenance free High torsional stiffness Low axial and radial reaction forces Alternative to flexible coupling This is a suitable ...
VULKAN Industry and Energy
Rotational speed: 490 rpm - 3,600 rpm
Fluid couplings for large machinery with high torque of inertia VULKAN fluid couplings are based on the Föttinger principle of hydrodynamic couplings. In its simplest version, a fluid ...
VULKAN Industry and Energy
Torque: 60,000 Nm
Renold Couplings’ new RBI coupling offers a general purpose, cost effective range, which is manufactured in SG iron for torques up to 60 kN.m. Applications: Rubber processing and plastics industry Fluid ...
RENOLD
Torque: 48 Nm - 1,364 Nm
Rotational speed: 1,300 rpm - 3,000 rpm
The Stromag SVR Couplings are insert couplings fitted with a 2-parts cam ring. This design allows easy assembly and dismantling of the complete coupling and easy replacement of the ...
STROMAG
Torque: 3 Nm - 560 Nm
Rotational speed: 4,000 rpm - 15,000 rpm
Torsionally flexible, backlash-free elastomer couplings with single-slit aluminium clamping hubs, highly compact design and outstanding concentricity for vibration and shock damped, uniform power transmission. Product ...
RINGFEDER POWER TRANSMISSION GMBH
Torque: 100 Nm - 150,000 Nm
Universal Joint Shaft Couplings Fits standard DIN UJ (Universal Joint) companion flanges. Release torque is adjustable by Wedgepin ratings. The maximum release torque is based on maximum Wedgepin ...
Torque: 49 Nm - 14,900 Nm
... compactness and making the coupling suitable for high-speed operation or in series to provide a torsionally soft coupling and to accommodate large misalignments Advantages of Layrub Couplings A ...
Torque: 10 Nm - 140 Nm
... smallest shaft diameters Features - For smallest shaft diameters between 3 mm and 16 mm - Excellent concentricity and transmission of bending moments
Torque: 211 Nm - 658 Nm
... for small shaft diameters Features - For small shaft diameters between 17 mm and 35 mm - Excellent concentricity and transmission of bending moments - Radial flat height
Torque: 1 Nm - 25,000 Nm
... magnetic coupling for every application. Our core competence is the production of customised couplings in close cooperation with our clients. Benefits Reliable alternative to conventional dynamic ...
Torque: 20 Nm - 1,300 Nm
Rotational speed: 6,500 rpm - 17,000 rpm
• simple installation, with EASY-Clamping hub on both sides • 6-corrugation bellows - cost-effective standard series • Torque range: 20 - 1.800 Nm • Shaft diameter: 8 - 85 mm
Torque: 1.1 Nm - 65 Nm
Rotational speed: 9,000 rpm - 42,000 rpm
... equipment / Mount machines / Medical / Machine tools / Packaging machines ● Optional Services -Couplings Bore and Keyway Additional Modification Service -Coupling Stainless Steel Screw Alteration ...
NBK (Nabeya Bi-tech Kaisha)
Torque: 0.7 Nm - 560 Nm
Rotational speed: 6,000 rpm - 45,000 rpm
MJC is a jaw type flexible coupling. Tight Fit sleeve enables transmission with zero backlash at low torque. Easy fit sleeve allows you to assemble and partition the hub and sleeve smoothly. Excellent ...
NBK (Nabeya Bi-tech Kaisha)
Torque: 1.8 Nm - 49 Nm
Rotational speed: 9,000 rpm - 31,000 rpm
MJS is a jaw type flexible short size coupling. Tight Fit sleeve enables transmission with zero backlash at low torque. Easy fit sleeve allows you to assemble and partition the hub and sleeve smoothly. Excellent ...
NBK (Nabeya Bi-tech Kaisha)
Torque: 0 Nm - 21,000 Nm
Rotational speed: 600 rpm - 4,000 rpm
... elements can work both as a pump and/or turbine. CONSTANT FILL FLUID COUPLINGS: OPERATING CONDITIONS The TRANSFLUID constant fill fluid coupling is a hydrokinetic transmission. The ...
Transfluid
Rotational speed: 0 rpm - 4,500 rpm
HYDRAULIC COUPLING FOR DIESEL ENGINES – STARTER The KFBD series Constant Fluid Couplings are used on all industrial equipment driven by internal combustion engines up to 500 kW. By transmitting power ...
Transfluid
Torque: 20 Nm - 33,100 Nm
Rotational speed: 1,500 rpm - 5,000 rpm
The BM flexible couplings are born from the historical BT couplings mounted for decades on Transfluid fluid couplings in thousands of applications. It is basically the same well-tested ...
Transfluid
... types are available: solid-hub couplings, designed to be remanufactured to customer specifications -Couplings associated with removable hubs making installation very easy. Conditions of use ...
CMW
Torque: 10 Nm - 975 Nm
These elastomer star couplings are used on servo shafts to overcome critical vibrations and when all-steel couplings reach their limits. They transmit torque without backlash and compensate for misalignment. ACPG ...
CMW
Torque: 11.5 Nm - 420 Nm
Curved-tooth couplings function as flexible connections. They are particularly suitable for transmitting high torques. They compensate for axial, radial and angular misalignments of the shafts to be connected. Gear couplings ...
CMW
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining