Watlow gas heaters

Power: 250 W - 8,000 W
Temperature: 350, 100 °C

Watlow’s new FLUENT in-line heater is a small, lightweight, high-performance heater that can replace both a traditional immersion type heater or a heater wrapped around ...

Power: 0 W - 1,000 W
Temperature: 200 °C

... WATROD enclosure heaters are designed to prevent freezing and condensation in electrical and mechanical housings. The WATROD heater element is enclosed in a perforated, aluminized-steel bracket to prevent ...

Power: 0 kW - 225 kW
Temperature: -29 °C - 650 °C

Watlow duct heaters are constructed of sturdy 0.430 in. (11 mm) diameter WATROD heating elements mounted to a 1⁄4 in. (6 mm) thick steel flange. These air duct heaters are easily adapted ...

Power: 235 W - 800 W

PTC heater with fan, continuous thermal output 235 - 800 W, and quick-connect terminal.

Power: 8 W - 150 W

PTC heater without fan, continuous thermal output 10 - 150 W, with quick-connection terminal.

Power: 3,000 W
Temperature: 20 °C - 650 °C
Pressure: max 1.0 bar

... industrial hot air device type 3000-E is the optimal air heater for production processes. Our air heaters are durable and suitable for continuous operation, ...

Power: 1,800, 2,400, 3,000, 3,600 W
Temperature: 20 °C - 650 °C
Pressure: max 1.0 bar

... Type 3000 industrial air heater produces constant hot air in continuous operation. Despite providing strong hot air performance, the small and lightweight air ...

Power: 3,000, 5,000, 5,100, 6,000, 7,500 W
Temperature: 20 °C - 700 °C
Pressure: max 1.0 bar

The industrial air heater type 5000 continuously produces hot air at a constant temperature. The compact and lightweight air heater enables integration ...

ATTSU RVE Electric superheated steam heater ATTSU RVE Electric superheated steam heater is used in certain processes which require superheated steam, therefore steam boilers are equipped with steam superheaters ...

The small dimensions of the gas-tight air heater enables space-saving installation. If one or several heaters are connected to the compressed air network, you will receive ...

Power: 0 kW - 2 kW
Temperature: 650 °C
Pressure: 0 bar - 6 bar

Housing made from stainless steel; connection chromedbrass Length of the connection cable and thermocouple line 1,5 mtr. Air hose available per meter Other voltage available on request 24 month warranty (except wear parts)

Power: 0 kW - 1 kW
Temperature: 0 °C - 600 °C

... despite air hose with internal connection line. The perfect device for confined spaces and installation positions. Voltage [VAC] - 230 Frequency [hz] - 50/60 Power [KW] - 0,435 - 0,8 Current [A] - 1,9-3,5 max. ...

Power: 1,000 kW

The use of heaters has continued to grow. Duct Heaters have been an integral part of the heater industry garnering considerable revenue from their sales. Duct Heaters ...

Power: 3,600 W - 2,000,000 W

Whether it’s an open coil duct heater, a tubular or a finned tubular duct heater, each duct heater serves the main purpose which remains the same – to heat up a large area in the most ...

Power: 30 kW

... basis. Duct heaters can be broadly categorized into two categories, air duct heaters and process heaters. While both of these categories are variations of the same model, their uses are ...

Power: 5, 9 W
Temperature: -45 °C - 70 °C

... SEMICONDUCTOR HEATER RCE 016 | 5W, 9W - Wide voltage range - Dynamic heating up - Energy saving - Compact Small heaters designed to prevent condensation and to ensure a minimum ...

Power: 18 kW - 35,000 kW
Temperature: 50 °C - 950 °C
Pressure: 0 bar - 200 bar

... OSRAM Heaters, Sylvania Air Heaters, OSRAM Process Heat, Process Heat, Process Air Heaters, Air Heaters, Industrial ...

Power: 0 kW - 8 kW
Temperature: 0 °F - 1,500 °F
Pressure: 0 psi - 25 psi

The Serpentine Triple Pass heaters are modular field replaceable air heater products commonly used in OEM applications. The popular air heater element ...

Power: 0 W - 24,000 W
Temperature: 0 °C - 900 °C
Pressure: 0 bar - 10 bar

... Process Heat, Process Air Heaters, Air Heaters, Industrial Air Heaters, High temperature heaters, ...

Power: 250 kW - 9,300 kW
Temperature: 300 °C

... control of the pressure. Availability of Low NOx Burner integration Availability of running on Natural gas, Oil or Combination Customer-specific boiler room design Easy maintenance Availability of ...

Power: 20 kW - 80 kW
Temperature: 20 °C - 200 °C

... the drying or heating area. Then, the cooled air flows through the lower air exit for additional heating and continuous circulation. When the humidity of the circulating ...

Power: 5 kW
Temperature: 60 °C

... creating a relay. The left and right sides function as air outlets and inlets sequentially, removing all the heat produced by the steam heater. It comes with an electric fresh air valve ...

Power: 80 W
Temperature: 30 °C
Pressure: 0 bar - 100 bar

... electrical heating block, which is connected to an annexed temperature limiter additionally. Technical data Medium: all non-aggressive gases and liquids Nominal size: DN 8 Nominal voltage: 110÷265 VAC, 50 Hz Temperature ...

Power: 136 kW - 225 kW
Pressure: 250 Pa - 400 Pa

... • Flue gas exhaust • Separate Riello oil burner • Summer-Winter switch for ventilation only • Electronic flame control with photocell • Fan-Limit thermostat with automatic reset • Limit thermostat ...

Master gas heaters provide large volumes of instant heat. They are very cost effective, robust and efficient. Portable gas heaters are best for well ventilated areas ...

Indirect oil heater MASTER BV 500 with separate Riello Burner Heating Power - 150 kW Main features: *Clean hot air *Powerful centrifugal fan *Low noise ...

Power: 3,000, 2,000, 1,000, 500, 5,500 W
Temperature: 200, 140, 350 °C
Pressure: 0 bar - 10 bar

... oil, as well as air or gases in general at up to 15 bar max. They are fitted with a screw plug immersion heater and a safety thermostat. Fluid circulation heaters can be connected hydraulically ...

Power: 2,000, 4,500, 6,000 W
Temperature: 300 °C

Designed to heat air or nitrogen up to 150°C, up to 15 bar maximum pressure. Consisting of a DN 80 vessel in painted Steel, 0 77 screw plug immersion heater and a 300°C adjustable safety thermostat. ...

Power: 1 kW - 14 kW
Temperature: 40 °C

Electric duct heaters, for heating air to approx. 40°C in round airconditioning ducts (diameter from 125 to 630mm) to a maximum pressure of 100mm WC and a minimum air ...

... Water, Oil, Grease >> Steel - Alkaline cleaning solutions, Tars, Asphalt or air heating >> Stainless Steel - Corrosive liquids, food processing equipment, Radiant heating >> ...

Power: 2,000 kW

Duct heaters are heat transferring devices which are an assembly of heating elements mounted in a frame or duct. Preferably used for non-pressurized air-heating systems, there are three types of duct ...

Finned tubular heaters are widely used in application which requires forced convective heating of air or gases at low to medium temperatures. Heaters are made up of tubular ...

Power: min 90.0 W
Temperature: min 20.0 °C

Many power, voltage, material and control options available. All products manufactured to short lead-times. Indoor and Outdoor styles. Can be designed to meet UL/CSA standards, ATEX, IECEx etc. For more information contact LMK Thermosafe

Air Heaters and Finned Tubular Heaters are used for the heating of air, non-flammable gases and steams, for ventilation and air conditioning devices, construction of ...

Power: 3 kW
Temperature: 750 °C - 950 °C

Our Tubular Heaters out of own production are mainly used at liquid baths, air heaters, hot runner systems, screw-in tubular heaters, flange heaters, ...

Temperature: 0 °C - 390 °C
Pressure: 0 bar - 39 bar

... Steam Air Heating Solutions Our steam air heater is a reliable and efficient solution for heating air in industrial processes. It ...

Power: 4 kW

Strip heaters to fix on flat surfaces. Models with fins to air and gases heating. Materials: aluminum, zinc coated steel with mica insulation, stainless steel with mica insulation, aluminized steel ...

They are a compact and easy-to-install solution for heating fluids in any industry. This range of products ranges from models built from immersion heaters to others where the resistance does not come ...

... has its specific properties. Normally, only air is heated in electrical channel-type air heaters. This heated air is used for different purposes: Heating ...

Inline heaters are a special variant of the electrical flow-type heaters. They are designed for efficiently heating liquid or gaseous flowing fluids. The absolutely pocket-free design ...