Lifting columns and Other electric actuators

147 companies | 479 industrial products

Companies per page

1 products SMC PNEUMATIC
new SMC PNEUMATIC LE series
electric linear actuator LE series SMC PNEUMATIC

Various servo motors can be mounted due to the addition of the...

3 products SMC France
new SMC France 25 - 75 mm, max. 350 mm/s | LEP series
miniature electric linear actuator 25 - 75 mm, max. 350 mm/s | LEP series SMC France

As the trend to use smaller workpieces in manufacturing continues to grow, we are pleased to announce the introduction of our Series LEP Miniature Electric Actuator. Small enough to fit in the palm of...

new SMC France 10 - 30 mm, max. 400 mm/s | LAT3 series
miniature electric linear actuator 10 - 30 mm, max. 400 mm/s | LAT3 series SMC France

We are growing our miniature e-actuator range with the launch of our new high tech Card Motor LAT3. The same size as a business card, the LAT3 is an extremely thin and lightweight electric slide table...

SMC France LER series
compact electric rotary actuator LER series SMC France

Following the success of our "easy setting" LE electric actuator range, we are pleased to unveil our latest addition - a compact, high performance, electric rotary actuator with position, speed,...

3 products SMC
new SMC  25 - 75 mm | LEP series
miniature electric linear actuator 25 - 75 mm | LEP series SMC

As the trend to use smaller workpieces in manufacturing continues to grow, we are pleased to announce the introduction of our Series LEP Miniature Electric Actuator. Small enough to fit in the palm of...

new SMC  10 - 30 mm | LAT3 series
miniature electric linear actuator 10 - 30 mm | LAT3 series SMC

We are growing our miniature e-actuator range with the launch of our new high tech Card Motor LAT3. The same size as a business card, the LAT3 is an extremely thin and lightweight electric slide table...

video SMC  25 - 100 mm | LXF series
linear stepper actuator 25 - 100 mm | LXF series SMC

5 phase stepper motor, without motor brake Low...

SKF Linear Motion max. 1 500 N | CAR Series
electric linear actuator max. 1 500 N | CAR Series SKF Linear Motion

The CAR range of industrial type actuators offers a unique standard of performance, durability, and reliability. The compact design incorporates...

video SKF Linear Motion max. 12 000 N | CASD Series
electric linear actuator max. 12 000 N | CASD Series SKF Linear Motion

The CASD linear actuators have been designed for various solar technologies including photovoltaics, concentrating photovoltaics, and concetranting solar power. Combining robust design, easy installation,...

2 products GIMATIC
GIMATIC 96 N | LV25 series
electric linear actuator 96 N | LV25 series GIMATIC

- Integrated linear motor. - Integrated encoder sensor. - Recirculating ball-bearing guide system. -...

GIMATIC 45 Ncm, 90° - 180° | MRE series
electric rotary actuator 45 Ncm, 90° - 180° | MRE series GIMATIC

Suitable for 90° or 180° rotation angle mechanically set. Plug & play user friendly gripper. No electricity consumption when actuator is...

HOERBIGER Automatisierungstechnik GmbH max. 180 kg
lifting column max. 180 kg HOERBIGER Automatisierungstechnik GmbH

Patient weight up to 180 kg (396 pounds) Maximum torsional rigidity Optimal functional density When the design of operating tables calls for low heights, a lift column featuring minimal installation dimensions...

HOERBIGER Automatisierungstechnik GmbH max. 250 kg
lifting column max. 250 kg HOERBIGER Automatisierungstechnik GmbH

Patient weight up to 250 kg (550 pounds) Maximum torsional rigidity Optimal functional density In addition to adapting lift columns for operating tables to the patient weights set out in the specification...

HOERBIGER Automatisierungstechnik GmbH max. 454 kg
lifting column max. 454 kg HOERBIGER Automatisierungstechnik GmbH

Patient weight up to 454 kg (1,000 pounds) Maximum torsional rigidity Optimal functional density with up to 8 functions The design layout of operating tables offers little space inside the casing. As...

24 products Johnson Electric
Johnson Electric 35 - 58 N, 12 Vac, 13 - 150 mm | UCC series
synchronous linear actuator 35 - 58 N, 12 Vac, 13 - 150 mm | UCC series Johnson Electric

Johnson Electric provides AC synchronous motors for rotary applications with speed up to 720 rpm and linear applications with speed up to 8.33 mm/s. Offered in various performance...

Johnson Electric ø 35 - 58 N, 12 - 24 V, 13 - 150 mm | UCK series
synchronous linear actuator ø 35 - 58 N, 12 - 24 V, 13 - 150 mm | UCK series Johnson Electric

Johnson Electric provides AC synchronous motors for rotary applications with speed up to 720 rpm and linear applications with speed up to 8.33 mm/s. Offered in various performance...

Johnson Electric 15 - 40 N, 6 - 24 V, 15 mm | UAL series
linear stepper actuator 15 - 40 N, 6 - 24 V, 15 mm | UAL series Johnson Electric

Saia® linear motor series have enhanced design features and improved performance. They are available in 3 sizes with strokes to 150 mm and forces to 80N and are among the forefront...

Johnson Electric 35 - 100 N, 6 - 24 V, 13 - 150 mm | UCE series
linear stepper actuator 35 - 100 N, 6 - 24 V, 13 - 150 mm | UCE series Johnson Electric

Saia® linear motor series have enhanced design features and improved performance. They are available in 3 sizes with strokes to 150 mm and forces to 80N and are among the forefront...

Johnson Electric 35 - 88 N, 6 - 24 V, 13 - 150 mm | UCL series
linear stepper actuator 35 - 88 N, 6 - 24 V, 13 - 150 mm | UCL series Johnson Electric

Saia® linear motor series have enhanced design features and improved performance. They are available in 3 sizes with strokes to 150 mm and forces to 80N and are among the forefront...

Johnson Electric 360 N, 48 V, 10 - 95 mm | ULE series
linear stepper actuator 360 N, 48 V, 10 - 95 mm | ULE series Johnson Electric

Saia® linear motor series have enhanced design features and improved performance. They are available in 3 sizes with strokes to 150 mm and forces to 80N and are among the forefront...

15 products LINAK
LINAK max. 2 500 N, max. 43 mm/s | DL2
compact lifting column max. 2 500 N, max. 43 mm/s | DL2 LINAK

The DESKLINE® DL2 column is designed for a wide range of workstation applications and it is the ideal choice for duties such as height adjustment of computer workstations, work...

LINAK max. 700 N, max. 43 mm/s | DL4
compact lifting column max. 700 N, max. 43 mm/s | DL4 LINAK

The DESKLIFT DL4 is a compact lifting unit with a small installation dimension where the guide and actuator functions are integrated. The whole actuating unit with the motor...

LINAK max. 800 N, max. 34 mm/s | DL7, DL7R
lifting column for furniture max. 800 N, max. 34 mm/s | DL7, DL7R LINAK

The DL7 is a basic DESKLINE column for simple desks mainly used in offices or private homes. The DL7 combines well-proven technology and basic features into a price/performance optimised low-cost 2-part...

LINAK max. 800 N, max. 38 mm/s | DL11
lifting column for furniture max. 800 N, max. 38 mm/s | DL11 LINAK

The DL11 is a round 3-part column made by LINAK. Besides the round guidance, the DL11 is based on the well-known DL5 and DL6 motor housing. The robust construction...

LINAK max. 700N, max. 38 mm/s | DL14
lifting column for furniture max. 700N, max. 38 mm/s | DL14 LINAK

The DL14 column set new standards for inline columns. The compact, round column is developed to fulfill the market requirements for a low built-in dimension and at the same time a long stroke...

LINAK max. 800 N, max. 38 mm/s | DL16
lifting column for furniture max. 800 N, max. 38 mm/s | DL16 LINAK

The DESKLIFT DL16 was specially made to extend the adjustment range of desks. LINAK fulfils even the strongest European standards that demand a range of adjustment from 600 mm up to 1250 mm. The DL16...

2 products MOOG
MOOG 50 - 200 Nm
electric rotary actuator 50 - 200 Nm MOOG

Electric Rotary Control Loaders High Dynamic are based on high torque servomotors in a direct-drive set-up and capable of generating output torque of up to 200 Nm continuously for high-fidelity requirements. Depending...

MOOG 10 - 40 Nm
electric rotary actuator 10 - 40 Nm MOOG

The Electric Rotary Control Loaders Medium Dynamic is meant for primary and secondary controls. They provide medium torque and velocity, as well as motor/gearbox combinations capable of generating an...

1 products Framo Morat
Framo Morat
high-performance rack and pinion linear drive system Framo Morat

The façade louvers on the architectural prize-winning "Kraanspoor" building in Amsterdam are able to move once again thanks to new, corrosion-resistant rack...

Parker Hannifin GmbH OSP-E BP series
electric linear actuator OSP-E BP series Parker Hannifin GmbH

Precise synchronized bi-parting movements Precise path and position control High speed...

Physik Instrumente max. 80 N, max. 25 mm
linear stepper actuator max. 80 N, max. 25 mm Physik Instrumente

High-Load, Compact and Highly Cost-Efficient, with Limit Switches M-228 and M-229 series linear actuators are driven by powerful direct-drive stepper motors, or are equipped with more compact,...

Physik Instrumente max. 400 N
compact linear stepper actuator max. 400 N Physik Instrumente

High-Resolution Linear Actuator with Folded Drive For fine positioning tasks (e.g. in astronomy applications) the extremely compact M-230KCLA...

Physik Instrumente max. 50 mm
linear stepper actuator max. 50 mm Physik Instrumente

Non-Rotating Tip, Strokes to 50 mm M-168 Stepper-Mikes...

MICRO-CONTROLE / Spectra-Physics max. 120 N, max. 25 mm/s, max. 50 mm
electric linear actuator max. 120 N, max. 25 mm/s, max. 50 mm MICRO-CONTROLE / Spectra-Physics

CMA Series Compact Motorized Actuators - Up to 25 mm motorized travel in a light, very compact design - Replaces manual micrometer drives with very similar form factor - Stepper, open-loop DC, and...

6 products WITTENSTEIN AG
WITTENSTEIN AG 50 - 380 rpm | TPM+ dynamic
electric rotary servo-actuator 50 - 380 rpm | TPM+ dynamic WITTENSTEIN AG

Features at a glance Possible to reduce gearhead backlash to less than 1 arcmin Direct attachment of drive components (pinion, belt pulley, indexing table) to standard output flange An additional...

WITTENSTEIN AG 20 - 220 rpm, 230 - 3 100 Nm | TPM+ high torque
electric rotary servo-actuator 20 - 220 rpm, 230 - 3 100 Nm | TPM+ high torque WITTENSTEIN AG

Features at a glance Possible to reduce gearhead backlash to less than 1 arcmin Direct attachment of drive components (pinion, belt pulley, indexing table) to standard output flange An additional...

WITTENSTEIN AG 40 - 1 500 rpm, 50 - 1 600 Nm | TPM+ power
electric rotary servo-actuator 40 - 1 500 rpm, 50 - 1 600 Nm | TPM+ power WITTENSTEIN AG

Features at a glance Possible to reduce gearhead backlash to less than 1 arcmin Direct attachment of drive components (pinion, belt pulley, indexing table) to standard output flange An additional...

WITTENSTEIN AG max. 10 000 Nm | SPM+
electric rotary servo-actuator max. 10 000 Nm | SPM+ WITTENSTEIN AG

More dynamic – Shorter – Cooler Extra duration: Optimal...

WITTENSTEIN AG HPLS
high-performance rack and pinion linear drive system HPLS WITTENSTEIN AG

More dynamic – More compact – More precise Extra performance: Extremely dynamic,...

1 products ORIENTAL MOTOR
ORIENTAL MOTOR 100 - 500 N | EZC series
electric linear actuator 100 - 500 N | EZC series ORIENTAL MOTOR

Power supply: 200 - 230 VAC or 24 VDC Marking: CE Dimensions: 42 (w) x 42 (h) mm Stroke: 50 - 300 mm Max. thrust force: 140 N Max....

Parker Electromechanical Division IP65 | ET series
electric linear actuator IP65 | ET series Parker Electromechanical Division

Features : Stroke lengths up to 2400mm Ballscrew pitches from 5 to 50mm/rev. Thrust forces...

Parker Electromechanical Division ETH series
electric linear actuator ETH series Parker Electromechanical Division

The well-known series of ET electro-thrust cylinders, which is widely used in thousands of different applications was completely redesigned and enhanced. With the new ETH electro thrust cylinder, we succeeded...

Parker Electromechanical Division HLE series
electric linear actuator HLE series Parker Electromechanical Division

Up to 20 m for timing belt drive High speeds in practical applications of up to 5 m/s...

Parker Electromechanical Division HPLA series
electric linear actuator HPLA series Parker Electromechanical Division

Up to 50 m for rack-and-piniondrive (HPLA180) Up to 20 m for timing belt drive High speeds in practical...

new RK Rose+Krieger 180 - 480 mm, max. 400 Nm | RK Powerlift XL
lifting column 180 - 480 mm, max. 400 Nm | RK Powerlift XL RK Rose+Krieger

RK Rose+Krieger is adding a new member to its Powerlift lifting column range with the RK Powerlift XL, the Minden company now offers an extremely powerful lifting column for industrial use. With a tensile...

video RK Rose+Krieger max. 498 mm, 8 - 16 mm/s, max. 3 000 N | Multilift series
lifting column max. 498 mm, 8 - 16 mm/s, max. 3 000 N | Multilift series RK Rose+Krieger

The Multilift is for continuous height adjustment of tables, equipment, assembly workstations...

video RK Rose+Krieger max. 500 mm, 8 - 32 mm/s, max. 4 000 N | RKSlimlift series
lifting column max. 500 mm, 8 - 32 mm/s, max. 4 000 N | RKSlimlift series RK Rose+Krieger

The RKSlimlift looks unflashy and filigree but it is highly loadable....

video RK Rose+Krieger max. 650 mm, max. 50 mm/s | RK Powerlift series
telescopic column max. 650 mm, max. 50 mm/s | RK Powerlift series RK Rose+Krieger

The RK Powerlift has been developed to be used as single column. Its high...

video RK Rose+Krieger max. 700 mm, 8 - 18 mm/s, max. 3 000 N | Alpha series
lifting column max. 700 mm, 8 - 18 mm/s, max. 3 000 N | Alpha series RK Rose+Krieger

The guide profiles of the Alpha Colonne are exactly square shaped....

video RK Rose+Krieger max. 600 mm, 8 - 20 mm/s, max. 4 500 N | Lambda series
telescopic column max. 600 mm, 8 - 20 mm/s, max. 4 500 N | Lambda series RK Rose+Krieger

The lifting column LAMBDA-Colonne is a telescopic drive which is alone...

1 products SCHUNK
SCHUNK 2 - 23 Nm | PW
electric rotary servo-actuator 2 - 23 Nm | PW SCHUNK

Servo-electric rotary pan-tilt actuator...

3 products Thomson
Thomson THOMSON®
telescopic column THOMSON® Thomson

Thomson’s linear lifting units are designed as...

Thomson THOMSON®
lifting column THOMSON® Thomson

Thomson’s Lifting Columns are self-supporting and height adjustable, perfect for home, medical, health/fitness,and...

Thomson 12 - 36 VDC, max. 20 Nm | THOMSON®
electric rotary actuator 12 - 36 VDC, max. 20 Nm | THOMSON® Thomson

Rotary DGB actuators feature a variety of DC motor and gearbox combinations for applications...

1 2 3 4 5 6 7 8
Filter by :
Related categories
Search by product
Search by manufacturer
Search by catalog
With DirectIndustry you can find a nearby distributor, contact a manufacturer for an estimate or a price, or examine product characteristics and specifications.