|
|
|
|
|
|
Leak Test Manager is the valid instrument placed side by side to the leak test product line; its essential applicative functions are:
Test management
The possibility to formulate all the instrument parameters, to manage the start-stop test functions and to visualize the result of the same one, allow to have the complete control on PC of the seal tests instrumentation.
Detailed test visualization
The graphical visualization of the test pressure development in relation to the test time, with graphic amplification during the test phase, allow to execute one first detailed analysis about the leak, in order to estimate the nature of the same one.
Tests data archiving
The software allows to register the parameters about the executed tests and the data worked out by the operator (operator, product code…), and it can choose to register all of them or only those concerning tests with desired results.
The data archiving develops in Database Access or in Excel electronic spreadsheet.
Tests print
The software, at the end of test, prints the data concerning the executed test. It is possible to choose between the print activation or deactivation, otherwise activate the same one only for the tests types with desired results.
Re-Test management
Leak Test Manager allows to manage the new proof of the piece with leaks rates in conformity limit, putting in evidence in files and prints that it is not a new proof, but a further control of the same component.
|
|
NonDestructive Evaluation [NDE] or NonDestructive Testing [NDT] is widely used to examine critical components either during the manufacturing process or while these components are in use. The computer simulation of NonDestructive methods now makes it practical to explore new ideas and approaches for assessing the quality of a component.
CIVA is a pioneer in providing NDE simulation. It provides one with the opportunity to simulate NDE physics and to post-process and review an actual inspection solution in order to determine reliable flaw detection.
CIVA presently comes with the following types of physics technologies:
- Ultrasonic Testing [UT]
- Eddy Current Testing [ET]
- Radiographic Testing [RT]
|
|
|
|
|
|
PXI is a test, measurement, and control platform designed for demanding applications that require maximum uptime and a high level of reliability. The PXI specification ensures this with requirements such as a rugged Eurocard form factor and forced-air cooling. Moreover, PXI products from National Instruments are designed, manufactured, and tested with the goal of delivering the highest quality products for the most demanding applications. For example, during new chassis development, Flotherm modeling is used to optimize cooling within the chassis card cage and power supply. During the development testing stage, empirical testing is performed to ensure these cooling levels have been achieved. Another example is the fact that PXI chassis, controllers, an modules from NI undergo highly accelerated life testing (HALT) during development testing to ensure product design margins and, in turn, reliability. These, along with the many other practices that NI employs during design, manufacturing, and test, result in PXI products of the highest quality and reliability. This is evident when you examine both the product's quality and reliability specifications, for example, mean time between failures (MTBF), and the tens of thousands of systems that have been deployed into the most demanding applications around the world, such as nuclear power plant inspection. However, all electronic devices have some failure rate. Not even the most reliable electronic systems (medical monitoring equipment, data servers in financial institutions, etc) are emune to failures, rare as they may be. In order to help you reduce the risk and maximize the uptime of your PXI system, this white paper presents best practices to follow during assembly, deployment, and maintenance. Additionally, if you do experience a failure, the techniques it discusses will minimize the downtime of your PXI system.
|
|
Wonderware Manufacturing Execution Modul
Wonderware Manufacturing Execution Modul dient der Produktionssteuerung, mit der Sie logische Fertigungsmodelle inkl. Fertigungsrouten, Tätigkeiten, Ressourcen und Materiallisten sowie die Beziehung zwischen diesen Elementen definieren können. Das Manufacturing Execution Modul ermöglicht die Ausführung der Produktionsplanung einschließlich präzisem Tracking und Kontrolle von WIP-Informationen (Work-in-Process) hinsichtlich Lagerbeständen, Ressourceneinsatz sowie die Einhaltung der Vorgaben.
Sie profitieren von einer transparenteren Fertigung - so lassen sich Bestände, Ausschuss und Nacharbeiten weitestgehend reduzieren. Die Produktionsmittelnutzung wird gesteigert und Termintreue gestärkt.
|
|
|
|
|
|
The transformation of the economic and social context that the world has invested during the last few years reflects also on the way to produce. The manufacture is passing from a Tayloristico model, based on production of volume with a specialistica subdivision of the job, to a production "upon request" or for store clerk, in which it is stretched to operate more on the ability than preparation (islands of job) that of repetition (unit/blots some).
They consequently change to the organizational criteria and the same ones layout of factory for being able to answer in effective way to the requirements expressed from the new market.
The characters of these changes can themselves be synthetized in some cues:
Widening of the produced range (more possibility than chosen)
Productive flexibility (personalizzazione ability)
More frequent orders, but in small amounts (from requirement)
Speed of preparation (without escorts)
Quality and price (benefit)
Technical characteristics (performance)
Level of service (life of the product)
The challenge for the manufacture of the third millenium is to succeed to conjugate with efficiency all these members.
|
|
|
|
|
|
Ampla is a powerful and dynamic suite of Manufacturing Execution Systems (MES) which enables corporate, IT, plant and production managers to:
OPTIMIZE PRODUCTION PROCESS EFFICIENCIES
Ampla allows you to drill 'down' into your plant's Key Performance Indicators so you can take considered and prioritized action.
MAXIMISE RETURN ON ASSETS (ROA)
A clearer picture on your plant's operations allow you to eliminate equipment downtime, unscheduled maintenance and process bottlenecks whilst improving overall equipment effectiveness, speeding up time-to-market and streamlining schedules.
INCREASE RETURN ON INVESTMENT (ROI)
Each tightly-integrated analysis module provides fast, incremental and measurable information so you can make continuous improvements when you need them. Since modules can be deployed incrementally across a single common platform, associated costs are shared across all modules, decreasing capital expenditure and increasing Return on Investment (ROI). Significant ROI can be expected in 6 to 12 months.
LOW TOTAL COST OF OWNERSHIP (TCO)
Each module resides on the same tree hierarchy and runs on a single real-time platform, saving you the time and costs of rework in the configuration and deployment of multiple modules.
|
|
Wonderware Manufacturing Execution Modul
Wonderware Manufacturing Execution Modul dient der Produktionssteuerung, mit der Sie logische Fertigungsmodelle inkl. Fertigungsrouten, Tätigkeiten, Ressourcen und Materiallisten sowie die Beziehung zwischen diesen Elementen definieren können. Das Manufacturing Execution Modul ermöglicht die Ausführung der Produktionsplanung einschließlich präzisem Tracking und Kontrolle von WIP-Informationen (Work-in-Process) hinsichtlich Lagerbeständen, Ressourceneinsatz sowie die Einhaltung der Vorgaben.
Sie profitieren von einer transparenteren Fertigung - so lassen sich Bestände, Ausschuss und Nacharbeiten weitestgehend reduzieren. Die Produktionsmittelnutzung wird gesteigert und Termintreue gestärkt.
|
|
|
|
|
|
Fuel data processing server FPS
FPS (Fuel data Processing Server) is intended for integration into vehicles and immovable objects monitoring systems software in order to process fuel level data.
Due to fuel level fluctuations, the content of noise in fuel sensors data is very high. The quality of raw data processing significantly affects the reliability and presentability of fuel information in the client’s AVL software.
FPS-server is integrated into a communication, processing or other server of the AVL-system operator/provider. FPS filters and smoothens the data to determine the actual fuel level at every time moment. After that, the server detects the fact and determines the volume of fuel fillings and discharges. FPS operates on the basis of Smoothing algorithm for the fuel data and detection of fuel fillings and fuel discharges - Fuelmetrix®.
Fuel data processing server FPS is developed in Java and uses sockets for connection. This allows to use it in any operating system and integrate into any software. The server processes fuel level data received from any sensors including regular ones
|
|
Data Acquisition and Supervisory Control System
Pages autoconfiguration for gammadue® and/or deltadue® instruments
Data acquisition and monitoring
Process operation
Wide library of drivers
Mimic and pre-formatted pages
Real time and historical trending
Powerful alarm handling
Flexible configurable reporting
Recipe management
Security levels for operator access
Ethernet TCP/IP networking
Data exporting to commonly used databases
|
|
controlls up to 50 machines on a PC server
archiving of the production data in a database
recording and evaluation of the machine data
centralized control of the production line
real time monitoring via online-display
reduction of the production costs
reduction of the controlling staff
Analysis Options :
number of bonds, circuit boards and chips per time interval
quality result of the bond connections
downtime analysis
wire deformation graph (source and destination)
efficiency evaluation of the production shifts
time per production unit, average time per production unit, uptime calculation
bond time, average bond time
log book
data export to MS Excel
user defined analyses are possible
|
|
Industrial IT System 800xA
ABB's award winning Industrial IT System 800xA provides you with a better way to achieve measurable productivity and profitability improvements. System 800xA extends the scope of traditional control systems to include all automation functions in a single operations and engineering environment; enabling your plants to perform smarter and better at substantial cost savings. System 800xA delivers extended productivity gains by:
- Reducing the time to decision and action
- Engineering for maximum performance
- Reducing risk through high integrity automation
- Integrating information for improved visibility
- Improving batch production profitability, consistency, and traceability
- Optimizing plant asset availability and performance
- Delivering Control and I/O to meet automation and safety needs
- Extending installed system capabilities through seamless evolution
|
|
|
|
|
|
Entis LNG Pro is the latest Windows™ based application for storage management of liquefied natural gas (LNG) in bulk storage tanks under cryogenic conditions.
Entis LNG Pro is based upon the proven Enraf Entis concept, seamlessly integrating all tank instrumentation, and combining interfacing and supervisory control into one platform. This concept provides operators with all key LNG information at a glance.
A comprehensive set of dedicated operations screens for monitoring stored LNG product behavior, makes this software application the only package you need for all your LNG storage monitoring and control needs.
Special operator screens display all necessary profile data for the operator to determine LNG product behavior, controlling stratification build up and other unwanted situations.
Advanced inventory management, trending and reporting capabilities complete the functionality of Entis LNG Pro. Both observed and calculated data are stored in the program database for evaluation purposes.
|
|
Multi-language Supervision Software ( for Windows platform) for a constant monitoring of production and data storage.
Software for plant control and supervision, it is able to monitor the real-time data and the state of the plant in graphic form (synoptic).
Memorization of max 9999 Fomulas.
Raw material traceability used for each batching.
|
|
|
|
|
|
Leica GeoMoS
The Leica Automatic Deformation Monitoring System
The Leica GeoMoS software provides a highly flexible automatic deformation monitoring system that is able to combine geodetic, geotechnical and meteorological sensors to match the needs of your moni-toring project. The Leica GeoMoS software is comprised of two main applications called Monitor and Analyzer. Monitor is the online application responsible for the sensor control, collection of data, computation and event management. Analyzer is the offline application responsible for the analysis, visualization and post-processing of the data.
Multi Purpose
Leica GeoMoS is a multi-purpose automatic deformation monitoring software that can be used for:
Structural deformation monitoring (e.g. dams, tunnels, bridges, high-rise buildings, construction) Land-slide and settlement detection (e.g. mining, rock falls, volcano slopes, subsidence)
Automated surveys (e.g. continuous, automated measurements) And many more...
GeoMoS stores all measurements and results in an open SQL database. The data can be accessed both locally and remotely, using either GeoMoS Analyzer or third party software.
Sensor Connections
Leica GeoMoS offers the ability to connect geodetic (total stations and GNSS sensors) and geotechni-cal sensors to understand the reasons of any detected movement and to improve the prediction of failure. In addition to the traditional serial based communication Leica GeoMoS also includes a direct TCP/IP communication interface to support Ethernet technology and mobile networks.
|
|
|
|
|
|
SOFTWARE: Dotexa Lite (monitoring software).
COMPLETE PRODUCTION CONTROL
User-friendly software which integrates display and control of all the Doteco systems, for example, material loading, gravimetric metering, extrusion control, thickness profile, film width measurement, extrusion and line speeds.
- Recipe management: Allows creating or editing and filing 100 metering recipes and/or 100 extrusion recipes which can later be downloaded.
- Product management: Allows creating or modifying a database of coded products. A metering and/or extrusion recipe is assigned to a product code.
- Order management: Allows creating or modifying a list of job orders containing useful data to identify and trace the individual orders. A product code is assigned to each order.
- Metering control: Real-time display and state setting.
- Layer components: Metering data setting.
- Extrusion control: Real-time display and state setting. Using the arrow keys on the display or modifying the setpoints, line production can be changed or the individual layers simultaneously.
- Thickness profile: XY and polar graphic display.
- Consumption report: Storage of ingredient consumption for an exact inventory of the raw materials.
- Quality report: Storage of the process data for quality control requirements.
- Alarm report: Storage of alarm events.
- SPC: Statistical Process Control to examine the metering and extrusion process trend.
- Password management: 5 levels of password protection.
- Maintenance program: Scheduler for maintenance operations.
|
|
From now on there is a new Epson robot control software available. The new Epson RC version is not only a new relaes of Epson powerful robot control software, but comes along with a bulk of new and helpful features.
One of the mostimportant improvements is, that the new software supports a french GUI. Beside German and english the new software now supports all major languages in Europe.
Also the connectivity has been improved by an important part. Beside the numerous existing interfaces, Standard I/O, Ethernet I/O, RS232, Centronics and USB, now Fieldbusses are supported %u2013 concrete Profibus and Devicenet.
Also the new Epson ProSix robot series can be equipped now with the powerful Epson vision system.
|
|
Speeder-one® is the extremely intuitive and user-friendly software interface that controls all of our digital drives.
- Easy to use.
- Install utilizing Windows ‘98, Windows 2000 or Windows XP software.
- Allows configuration of all motor and drive parameters.
- Allows positioning profile parameter configuration.
- Can be used for monitoring drive motor functioning.
- Allows testing of various drive operation modes.
- Procedures for auto-phasing and analog input.
- Analog I/O management.
- Digital I/O management.
- Allows saving and loading of configuration files for motor/drive coupling and integrated positioning system.
- Under development:
oscilloscope tools
additional language
file confrontation tool
|
|
Delta's powerful motion control software packages allow you to set up, display, troubleshoot, configure and control all features of Delta's motion controllers.
The motion control software is shipped with the motion controllers and is available for free download.
The software packages are controller-specific. Use the chart below to determine which software you need.
|
|
|
|
|
|
GalilTools is Galil's set of software tools for current Galil controllers. It is highly recommended for all first-time purchases of Galil controllers as it provides easy set-up, tuning and analysis. GalilTools replaces the WSDK Tuning software with an improved user-interface, real-time scopes and communications utilities.
The Galil Tools set contains the following tools: Scope, Editor, Terminal, Watch and Tuner, and a Communication Library for development with Galil Controllers.
The powerful Scope Tool is ideal for system analysis as it captures numerous types of data for each axis in real-time. Up to eight channels of data can be displayed at once, and additional real-time data can be viewed by changing the scope settings. This allows literally hundreds of parameters to be analyzed during a single data capture sequence. A rising or falling edge trigger feature is also included for precise synchronization of data.
The Program Editor Tool allows for easy writing of application programs and multiple editors to be open simultaneously.
The Terminal Tool provides a window for sending and receiving Galil commands and responses.
The Watch Tool displays controller parameters in a tabular format and includes units and scale factors for easy viewing.
The Tuning Tool helps select PID parameters for optimal servo performance.
The Communication Library provides function calls for communicating to Galil Controllers with C++ (Windows and Linux) and COM enabled languages such as VB or C# (Windows only).
GalilTools runs on Windows and Linux platforms as standard with other platforms available on request.
|
|
Ingenia servo drive controllers can be configured and operated through their registers. To do this, it is necessary to establish a communication channel with the controller and to activate the desired registers. Such configuration and operations can be tedious due to the need to use low level syntax and to know communication protocols, etc.
So that you don’t have to worry about these tasks, Ingenia has developed Motion Control Library (MCLib).
MCLib brings together a series of functions and components that provide an application programming interface (API) in C/C++ for Ingenia Servo Drive controllers.
All of this means that MCLib releases the integrator from register programming and protocol management tasks, allowing them to concentrate on final application development.
|
|
|
WinMotion combines soft motion, soft PLC, and HMI in a single, scaleable software application that provides single or multi-axis control across a full range of general motion applications including: material handling systems, semiconductor manufacturing equipment, printed circuit board manufacturing equipment, gantries, packaging machines, and test and measurement equipment.
|
|
|
PMC provides a comprehensive suite of software and programming tools that are compatible across our range motion control cards - and included at no extra charge.
|
|
SMP general motion controllers provide high-end motion control (up to 32 axes), an industry-standard PLC, and a Windows-based GUI, in a single software package. These controllers are truly PC-based, providing all-software motion and machine control solutions that require no motion control/PLC boards.
This SMP series of multi-axis, high-speed controllers is ideal for motion control applications in many industries: packaging, materials handling, pick and place, converting, food processing, laser cutting/engraving, plasma cutting, wood-working, semiconductor and more.
|
|
TMCL-IDE
Description
Integrated Developement Environment for TMCL (PC-Software)
The TMCL-IDE is an integrated development environment for developing stand-alone TMCL applications and for configuring TMCM modules. The built-in editor with TMCL syntax highlighting allows comfortable editing of TMCL programs. TMCL programs can be assembled and downloaded into the module using all possible interfaces (RS232, RS485, USB, CAN or IIC). It is also possible to read back TMCL programs from a module for analyzing and modifying them. These features make it easy to develop and test even large TMCL applications. The TMCL-IDE also contains other powerful tools that make it possible to easily find the best parameters for StallGuard and to calculate velocity and acceleration parameters.
The TMCL-IDE comes free of charge with all Trinamic TMCM modules.
|
|
|
|
|
|
M-SMC Software Motion Control
* Software module for the regulation of speed and/or positioning of motion axes
* Combined open loop/closed loop mode possible
* Master/slave operation for synchronous motions
* Convenient start-up via monitor
* Library for IEC 61131-3 PLC programs
M-CNC Three-dimensional motion
* Motion for cartesian 3-axis system
* Profile specification to DIN 66025 (program design for numerically controlled axes)
* Interfaces (analog, incremental, fieldbus, etc.)
* Configuration and diagnostic via Device Manager
* Start-up interface (CNC monitor)
* Library for IEC 61131-3 PLC programs
M-SHAFT Virtual Shaft Controller
* Software module that simulates a virtual shaft (0° to 360°)
* Cyclical and synchronous control with 32 axes
* Rotational speed of shaft can be changed during operation
* Independent master operation or can be synchronized as slave
* Convenient axis start-up via monitor (individual axes and total system)
M-HVC Speed and Positioning Regulator
* Software module for the regulation of speed and/or positioning of motion axes
* Configuration as speed or position controller or as cascade controller
* Combined open loop/closed loop mode possible
|
|
MotionDesk
ORMEC's MotionDesk Development Kit provides a complete motion programming environment on any IBM-PC or compatible computer running Windows 95, 98, NT, 2000 or XP (Windows Vista is not currently supported, MotionDesk can run in a virtual Windows 95/98/NT/2000/XP machine within Vista). The MotionDesk Development Kit provides software tools to simplify the configuration, development and maintenance of ORMEC motion control systems.
MotionDesk is a fully integrated, Windows-oriented "desktop" for motion control. It utilizes drop-down menus, toolbars and dialog boxes and presents a graphical user interface (GUI) to ORION controllers that is both intuitive and powerful.
|
|
What is Motion Perfect?
Motion Perfect 2 is designed to be used in conjunction with Trio Motion Technology's Motion Coordinator range of multi-tasking motion controllers.
It provides the user with an easy to use Windows based interface for rapid application development, controller configuration and monitoring of processes running on the controller.
|
|
|
|
|
|
SMNC is a G-Code based Servo Motion Control System that delivers multi-axis contouring without an expensive control panel and without a cabinet full of controls. With a suite of features, SMNC can convert CAD-dxf files into motion control g and m codes. With SMNC Software, one can deliver 3 axes of CNC at a cost comparable to a single annual service call for a traditional machine.
SMNC features a main screen similar in appearance to a traditional CNC system.
Along with a host of features comparable to a CNC system, SMNC includes:
* Linear and Circular motion control of multiple axes
* Configure Motors across multiple Serial ports
* Ability to set up on axis to mimic or copy another for gantry systems
* Smooth control of accel/decel for sensitive curvilinear motion
* Large Numerical display
* DXF input available
* 6 axis of control (includes axes mimic and Spindle)
* RS232 and/or RS-485 communication
* User definable M-Codes
* Each axis is configurable to match your hardware
* Side-screen displays your source code as it is executed
|
|
|
|
|
|
RuggedNMS™ – Network Management Software
RuggedNMS is a fully-featured enterprise grade network management software platform designed specifically for the rugged communications industry. RuggedNMS provides a comprehensive platform for monitoring, configuring, and maintaining mission-critical IP-based communications networks, such as those found in substation automation and “Smart Grids” for electric utilities, intelligent transportation systems, and
advanced control and automation for industrial processes.
Key Features:
- Centralized management and monitoring of network and networked devices to achieve desired level of network availability performance and operational efficiency
- Scalable and distributed architecture that can support very large networks
- Greater network visibility to enable proactive corrective actions and improved capacity utilization
- Web based UI with graphical network view with highly versatile and configurable auto discovery and polling subsystem
- Rich set of pre-packaged reports and tools to create user-defined reports
- Option to bundle the RuggedNMS on a dedicated “appliance” that will act as a centralized server
(pre-installed and ready to go “out-of-the-box”)
|
|
|
|
Monitoring and Automation software
