- Building - Construction >
- Construction and Mining Equipment >
- Construction equipment buckets, Shears, Grabs
Construction equipment buckets, Shears, Grabs
Load: 300 kg
Tested as an anchoring device for PSAgA (personal fall protection equipment) pursuant to DIN EN 795, class B The extension arms were specially-developed for use with the fall protection safety device with rescue lift and/or winch. They ...
Attachments are easy to install and remove Simple to use Wide field of application Long reach possibilities More flexible than a drill rig Improve percent of use of the excavator Enable the management of complex activities on site ...
Montabert
Load limit: 250, 500 kg
The TVB block grab is useful for the transport of stone and concrete blocks and other materials with parallel surfaces. The grab has a protective lining to ensure a safe and non-marring transport. The clamping jaw and the center of gravity ...
The Stanley EA08 Earth Auger is used for a wide variety of earth boring appliction. The EA08 can be operated with two people or by one person using the torque tube. Features: Output torque 250 ft. lb. / 339 Nm Reversable. ...
WIDTH EXTENSION SETS With front guides and jaws the digging width can be extended from 600 mm to 1500 mm LENGTH EXTENSION Sets with side guides and jaws the digging opening can be extended from 2200 to 2500 mm on the KHD 22, from ...
CASAGRANDE - Foundation Division
The MCP-IT fixed Pulveriser is the ideal attachment for secondary demolition or rather for the work of reduction and fragmentation of the demolished material making disposal and recycling easier by separating the reinforced iron from ...
Mantovanibenne
Wide range of bit options and four teeth styles available Combination shaft available for the models 15C and 30C Direct drive for efficient operation Improved mounting system for both excavator and loader mounting Speed and ...
BOBCAT
Transform your Bobcat loader into a powerful, economical and versatile excavator with our backhoe. This tool is ideal for landscaping and nursery work, sewage systems and septic tanks, water and power lines as well as many other jobs. ...
BOBCAT
The dipper swings from 48 degrees from the left to the right. There is therefore no need to skid your loader to dump backhoe spoil. Stabilizers and mounting kit are not required. The Bob-Tach™ backhoe is definitely a money-saving ...
BOBCAT
Rigual has extensive experience in the design and manufacture of spreaders for the application of solid manure, tailored to customer needs and manufactured in various capacities and models. AVAILABLE MODELS AND TECHNICAL CHARACTERISTICS Main ...
The hedge cutters of the HS series cut hedges with branches up to 4.5 cm in diameter. The HS series is offered in working widths of 1.60 m and 2.00 m. The low number of double strokes of the two cutting knives permits a clean cut and ...
Dücker, Gerhard, GmbH & Co. KG
The HSL 15 hedge cutter cuts hedges with twigs up to 3 cm in diameter. The working width is 1.50 m. The low number of double strokes of the two cutting knives permits a clean cut and safe use even in the horizontal position.
Dücker, Gerhard, GmbH & Co. KG
The Dücker FVA attachment frames make it possible to use various branch cutters and free profile saws on front loader, telescopic loader and wheel loader holders. The FVA attachment frame has a hydraulic evasion device with a shift ...
Dücker, Gerhard, GmbH & Co. KG
The cut wood handling needs strong tools, able to assist the operator in his work and to grant an effective, quick and clean work. Built with high-resistant materials, the WG serie offers the operational and safety features requested ...
CANGINIBENNE
SORTING GRAPPLE High productivity and use even in heavy-duty conditions thanks to the hydraulic 360° rotation standard on all models. Clamps and cutting edges in hardwearing HB400 steel. Designed to handle a variety of materials, ...
CANGINIBENNE
Carrier weight: 240 kg - 1,410 kg
Capacity: 125 l - 440 l
SCREENING BUCKET This screening bucket is powerful and specially designed to increase the yield and the speed of your work. The V series has been equipped with a patented system that allows you to replace sieving shafts rapidly, ...
CANGINIBENNE
Direct transmission Tungsten carbide teeth Suitable on difficult gradients Quick and effective
Auger for excavator and front Auger Highly versatile It can mount different types of tips and extensions From drilling to root crushing
The Hydraulic Mulcher STD M3 is designed with a strong and reliable structure and can easily fit any type of excavators. It is manufactured in different models, depending on the use and size of the excavator. It is supplied complete with ...
M3 METALMECCANICAMODERNA
Patented in 1974 the first world concrete mixing bucket and invented some years ago the side discharge mixing bucket, now M3 patented the completely new Concrete Mixing Bucket Twin Door. The both discharge systems permit to the worker ...
M3 METALMECCANICAMODERNA
The hedge trimmer M3 MC series can be fitted to mini excavators and is suitable to cut hedges (light pruning) up to a maximum Ø of 3 cm. The blades are in wear resistant steel. It is equipped with hjrth coupling, orbital motor protected ...
M3 METALMECCANICAMODERNA
The reliability of the revolutionary HPXdrive in combination with robust, versatile shells. Thanks to the drive system, the movement and closing force of the shells is constant and synchronized, generated by two hollow shafts, which run ...
KINSHOFER
The small and compact couplings have an innovative design and are equipped with a coupling jaw that rotates independently of the coupling core and mechanism for easy access, a safety device which is embedded inside the mechanism housing ...
Bucket weight: 140 kg - 720 kg
Hydraulic flow: 150, 40, 65, 55, 90 l/min
Hydraulic pressure: 200 bar
Bucket Screen buckets for screening all loose materials. 8mm a 16mm sizes of screened fractions, both fractions already included in the price of the bucket. HARDOX as standard on the most used parts of the bucket. ANTISTICK the non-stick ...
The tilt-grapple saw TFZ 90 360° has been developed by our partner company, Bachmaier Landtechnik. The endless rotating felling tong is a further development and thus the felling tong of the third generation. Designed for the Sennebogen ...
Capacity: 0.5 m³ - 1.05 m³
The TABE Crusher Bucket can transform the demolished material in gravel. The use of rubble in the job site ensures immediate savings in economic and environmental terms.In addition to the range of Crusher Bucket, TABE has a complete range ...
Carrier weight: 110 kg - 1,850 kg
TABE makes a range of Handling, Demolition and Recycling Grapples with several different models. Equipped with the best protection of the rotation and operating mechanisms on the market, this is a suitable tool for Demolition or Rip‐rap ...
GLOBRAM rotating pulverizers are perfect for primary demolition of buildings, vertical structures, floors, slabs and exterior walls. The unique shape of GLOBRAM rotating pulverziders is specifically designed to optimize the required ...
Carrier weight: 3 t - 50 t
The five distinct GLOBRAM 7-series models rotate with the same hydraulic 360° rotation mechanism as all other GLOBRAM rotating products. Every model in the 7-series has been specifically designed to work perfectly for a wide variety of ...
Engine Type Honda GX160 Engine Power 5.5 HP Engine Torque 10.3 Nm Oil Tank Capacity 0.58 Litre Fuel Tank Capacity 3.1 Litre Displacement 163 cm3 Working Width 200 mm Max. Scarifying ...
The only grapple on the market with a patented ‘A-Synchronous Grip‘ features arms that dynamically adjust their shape and movement to accommodate the load’s form and meet the user’s specific requirements. The innovative approach enables ...
Modularis Drive
Safely sort and recycle materials while effortlessly handling various loads. Experience a substantial increase in efficiency with the state-of-the-art Modularis Sorting Grapple. It can be used for: Waste sorting and recycling ...
Modularis Drive
Whether it’s heavy lifting or precision work, the Modularis Alligator Grapple is the ultimate choice. The unique shape of the grapple with wear-resistant interchangeable teeth at the end of the jaws enables easy penetration and gripping ...
Modularis Drive
Carrier weight: 1 t - 2 t
Volume: 22 l
The efficient and powerful Demolition Grab from DMS Technologie shows its strength above all in deconstructive work such as the removal of masonry or the dismantling of wooden structures, but can be used as an all-rounder for many other ...
DMS Technologie GmbH
Carrier weight: 2 t - 4 t
Volume: 55 l
Grab mass: 119 kg
The efficient and powerful Demolition Grab from DMS Technologie shows its strength above all in deconstructive work such as the removal of masonry or the dismantling of wooden structures, but can be used as an all-rounder for many other ...
DMS Technologie GmbH
Carrier weight: 2 t - 4 t
Volume: 76 l
Grab mass: 199 kg
The efficient and powerful Demolition Grab from DMS Technologie shows its strength above all in deconstructive work such as the removal of masonry or the dismantling of wooden structures, but can be used as an all-rounder for many other ...
DMS Technologie GmbH
Novatek’s versatile, high production Air & Electric Roto-Peen / Hand-Held Scarifiers are ideal for removing coatings from both steel and concrete surfaces. Quick change hubs with an assortment of abrasives enable rapid removal of mastics, ...
Novatek’s versatile, high production Air & Electric Roto-Peen / Hand-Held Scarifiers are ideal for removing coatings from both steel and concrete surfaces. Quick change hubs with an assortment of abrasives enable rapid removal of mastics, ...
Carrier weight: 6,000 kg - 19,000 kg
4 sizes available Easy interchangeable rollers Centralized greasing system Orbital motor Chain transmission The DSG Series is designed to operate for primary screening and separation of material such as top soil, peat, shell and ...
VTN EUROPE S.P.A.
The automatic hydraulic hitch can quickly install various configuration parts (buckets, breakers, hydraulic shears, etc.) on the excavator bucket, which can expand the application range of the excavator, save time and improve work efficiency. Description The ...
Shandong Yingfang Machinery Co., Ltd
Wood grabber are divided into: mechanical wood grabs and rotary wood grabs; mechanical wood grabs can be used without modifying excavator pipelines and hydraulic systems (low-cost type) Wood grabber are divided into: mechanical wood ...
Shandong Yingfang Machinery Co., Ltd
The small automatic snowplow is a ground snowplow, road snowplow, Small multifunctional snow pusher road snowplow. The small automatic snowplow is a ground snowplow, road snowplow, Small multifunctional snow pusher road snowplow. The ...
Shandong Yingfang Machinery Co., Ltd
Fully automatic quick coupler system that fits all mini excavators between 1-5 t. Why OQ? Change between various work tools within a few seconds! Increased versatility and efficiency. No oil spills, saving both money and the environment. ...
OilQuick AB
OQ 45-5 is a fully automatic quick coupler system to suit all backhoe loaders between 5-12 t and excavators of 5-10 t. Why OQ? Change between various work tools within a few seconds! Increased versatility and efficiency. No oil ...
OilQuick AB
OQ 60-5 is a fully automatic quick coupler system to suit all medium sized excavators from 8-18 t. Why OQ? Change between various work tools within a few seconds! Increased versatility and efficiency. No oil spills, saving both ...
OilQuick AB
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining