|
|
The CC-4000 SL is a perfect addition to the existing Bernstein
control housing range CC-4000 thanks to its elegant, slim-line
profile.
This high quality dynamic housing will enhance the appearance
of any modern machine or system. Available with either 55 or
99mm external depths, the system profile can be tailored to
match the exact size of the control unit (HMI, IPC etc.).
Controllers can be mounted easily, economically and securely
thanks to the many excellent technical properties of CC-4000 SL.
|
|
|
Cases aluminum: , electric cases aluminum, button aluminum boxes, distribution boxes aluminum, cable joint boxes aluminum, dimensions of 85x85x65mm with 200x260x85mm, resistance in temperature of -40 to +100C, material: aluminum Al If 12, tight IP66
|
|
1. It has excellent resistance against chemicals.
2. It can be used in wide temperature range.
3. It is proper to be used for indoor, outdoor or coastal area in harmful environment where expected to be contact with sea water.
|
|
|
Die cast in aluminium alloy and resistant to atmospheric and marine corrison. These enclosures are ideal for housing sensitive electronic assemblies and eletrical devices in both commercial and industrial environments.Gasketed with foam installing machine for preventing ingress of moisture and dust. Die cast Box's dimension is from 65x60x35 mm to 225x150x80mm. Also, all of HIBOX's products are waterproof and dust-free. (IP 66~67, NEMA 4X) Refer to the general catalogue of HIBOX on Direct-Industry or www.dsehibox.com
|
|
|
HUMMEL aluminium enclosures are made of Al Si 12 and are silver grey powder coated. Hinges can be mounted to its sides, latches to the bottom. Aluminium resist numerous alcalis and chemicals as well as oil and gasoline. They are very impact resistant.
|
|
Material: Die-cast aluminum
Most of 11A and 11B series boxes meet IP65 of IEC60529 dustproof and waterproof requirement
A wide range of size
Designed for mounting P.C.B.or DIN rail mounted terminal
Sand-blast finish of terminal boxes is painted in bone, as well as baking finish of amplifier boxes is mid-grey
EMI shielding
Construction with carbon fins for 11B series boxes
Stainless steel screws
Standard delivery:
1 box,1lid,4 or 6 screws,1 seal(some of 11B series include shielding -ring)
|
|
Protection class up to IP 65
Temperature range -40桫120
Defend corrision
Better conducting heat
Easily tooling
Defend RFI
Capability of expansion of mould and component by the prefabricated screws
Wall mounting application
The box and the cover can be earthed
|
|
With its ALUBOX series Scame is offering a range of metal products sure to satisfy specific installation requirements in situations that demand a robust product.
With its excellent mechanical resistance and the strength to counter climatic and environmental stresses, the ALUBOX series is particularly well suited to environments that are harsh because of the kind of work carried out there - heavy industry installations, installation right beside a machine, for industrial automation, on board ships, for thermal, chemical and petrol chemical plants - even outside.
The ALUBOX series aluminium junction boxes are suitable for using in environments of major fire risk (CEI 64/8 part 7) and in AD-FT installations according to the specifications of the CEI 64-2 norm.
|
|
Key Features:
- Seamless Deep Drawn Construction
- Numerous Trim Heights Available per Housing
- Various Alloys and Tempers Available
- Short Lead Times on Standard Products
- Numerous In-house Capabilities to Modify Your Housing
- Great for Prototyping
- Three Standard Nutplate Configurations Available on Select Housings
ZERO Manufacturing, Inc. is the premier manufacturer of deep drawn aluminum enclosures. Available in over 32,000 pre-tooled sizes. For seamless, draft-free construction in aluminum enclosures look to ZERO.
It all starts with a single sheet of metal. ZERO uses only the highest quality aerospace aluminum alloys. Although we most often recommend aluminum as a durable medium, we also provide deep drawn Products in brass, copper, cold-rolled steel and mu-metal (in select sizes).
Standard lead time is 6-8 business days for all stock items.
Standard lead time is 12-14 business days for all non-stock items.
All non-stock items incur applicable set-up fees.
|
|
|
|
|
|
Aluminium-Enclosures are universal, stabile and easily adapted. Packaging electrical, electronic and pneumatic components.
They are very sturdy and easily mechanically machined and can be painted to the customers specifications in small numbers. As Clamp Enclosures, they are constructed as a modular system and can be fitted with clamps and cable screw connections and are used as a junction enclosure for electric cables and wires. The control enclosure has the function to protect the highly sensitive electronics against water, dirt and dust. They are frequently used as enclosure for voltage sensors in the measurement and control technique. The production is carried out in pressure casting or die-casting. All enclosures comply with the protection class IP 66 according to DIN 40050 (spray water protected). The standard colour of the enclosure is RAL 7001. The lid screws cannot be lost and are made of stainless steel. The mounting of the enclosure is completed outside the sealed area using separate mounting grooves. The Neoprene lid seal is resistant against oil and petroleum, special seals such as silicone are available when requested.
|
|
|
The Ensto Cubo H range meets the requirements of the machine and military industry as regards resistance against solvents, petrol and oil. Excellent temperature, impact and RFI/EMI (additional gasket required) resistance. The Cubo H enclosures are made of cast aluminium, sides always plain, colour grey RAL 7001. Enclosures are available in 26 different sizes.
|
|
Robust aluminium enclosures for mechanical engineering and automation technology
Fastening possibility for DIN rails and mounting plates
Field enclosure (2 sizes) with open external fastening
|
|
Isolating critical controls from harsh environments is a job no one performs better than Hoffman. Our revolutionary enclosure solutions ensure reliable performance in a range of extreme conditions.
Aluminum Wall-Mount Enclosures
Clamp Cover
* Continuous Hinge with Clamps, Type 12
* Clamp-Cover, Type 4X
* Continuous Hinge with Clamps, Type 4X
COMPACT Cast Aluminum Type 4X Enclosures and Accessories
* COMPACT, Type 4X
* Hinge Kit
* Mounting Bracket Kits
* Panels
* DIN Type Rails
* Aluminum Type 4X Accessory Selection Matrix
|
|
Thanks to a partnership with a leading producer of bar systems, ETA has carried out tests and verifications on Areta cabinets in a specialized laboratory (CESI), in order to prove the short-circuit withstand strength of the main and protective circuits with a specific bar distribution system with 60mm centre line spacing. So, among its innovative solutions, ETA can now present the tested Busbar System, complete with its supports, bars, covers, clamps, adaptors and fuse bases.
|
|
Busbar System Overview
Easily distribute power to multiple components and remain touch-safe rated to IP20.
|
|
US9001CA1001E Cupboard of extension of autonomy for inverter US9001
1:00 with 8:00 of autonomy
Design similar to the US9001
1 cupboard and 10 modules batteries
Cupboard independent of the inverter
The cupboards can be put in parallel
Connection between the inverter and Battery Banks realized with cables of small section (2.5mm )
Modular
Hot Dconnectable for the replacement of the internal batteries
|
|
Sturdy, flexible and portable, modular, elegant design, EMC, IP, Handles & Feets i. e. for the use in Test & Measurement. General electronic packaging and medical industries.
|
|
|
|
|
|
The new IDG-A1 DIN rail mount enclosure is ideal for applications requiring a housing for smaller pcbs and minimal DIN rail space loss. The IDG-A1 has sleak lines, making this an attractive packaging medium for applications such as home/building automation.
This enclosure has been designed according to DIN 43 880, providing the dimensions and specifications required for installation component standards. Conforming to VBG 4 and IEC529/DIN VDE 0470-1, the IDG-A1 prevents accidental shock and injury while meeting the requirements of the automation industries.This new housing enables users to incorporate one vertical pcb and a top horizontal pcb or three horizontal pcbs. The top horizontal pcb is ideal for holding signalling devices/indicators and switches. Fully populated, the terminal blocks have a maximum of 12 screw clamp terminals. For applications not requiring all 12 I/O positions or requirements for additional internal space, selective loading may be done, with empty positions being filled with blind plugs.
|
|
|
A wide range made up of monobloc enclosures for wall or floor fitting, made in sheet steel painted with polyester resin or manufactured in stainless steel. Combinable modular enclosure systems, ideal for building up large frames and control desks.
|
|
The lid stay of the one-piece consoles is locked against unintentional closure.
Maximum space for cable entry with divided gland plates.
The mounting plate is height-adjustable by 2 x 40 mm, e.g. with deep installed equipment in the lid or cable entry from the rear.
Material / Surface finish
Material:
Stainless steel 1.4301
Enclosure: 1.5 mm
Door or double door and console lid: 2.0 mm
Mounting plate: 3.0 mm sheet steel
Surface finish:
Enclosure, door and console lid: Brushed, grain 120
Mounting plate: Zinc-plated
Supply includes
Enclosure, solid rear and sides, door or double door at the front, with locking rod, console lid with lid stay and stainless steel cam latched in the enclosure, two-piece gland plate, mounting plate, zinc-plated, passivated.
Protection category
IP 55 to EN 60 529/10.91, NEMA 12 is met.
|
|
Console system
Flexible console system, allows a versatile number of combinations to configure the system to your design. A range of 19" accessories adds further versatility. Available in both Mild and Stainless steel.
- MPC / MPCS, Console combination version, single or double door
- In mild steel and stainless steel
- MPG / MPGS, Console compact version, single or double door.
- In mild steel and stainless steel
|
|
-Hinged latch cover
1. Stainless steel hinge&latch type keeps water proof rating even though opening the cover frequently.
2. Changeable hinge&latch size or addable hinges&latches according to box size in order to keep more strong water proof rating
3. Type 4X&IP67 for indoor&outdoor application by neoprene gasket seal
4. Available 81 kinds sizes from 90x120x70 mm to 630x830x285 mm
5. Selectable gray or clear cover
6. Optional for modifying all latches instead of hinges
7. Available stainless steel wall mounting bracket
|
|
|
At the time of delivering the goods, the Draw Latch-Hinge and Particular Locking Device are equipped and its opening-closing is made simple, and it is a cabinet shape product. The delivery-time of our products is promptly made from our own factory with low price and the diverse sizes also the accessories which make the consumer's satisfaction. HIBOX has a various kinds of control boxes. The dimension is from 200X300X150 mm to 500X400X200 mm or 400x 600x 230 mm. All of the products are waterproof and dust-free. (IP 66~67, NEMA 4X) Refer to the general catalogue of HIBOX on Direct-Industry or www.dsehibox.com
|
|
COMMAND BOXES INDUSTRIAL CONTAINERS
To choose an appropriate container is a crucial phase in the development of a project. It is necessary to proceed with systematic investigation, methodical assessment and application variables: where are we going to install our equipment? In what environmental conditions? What level of protection must we have? How much space is available? How should it be arranged? By working out this information we can define the most suitable product and meet the demands of the project. New Elfin produces a vast range of containers:
- aluminium: 70x118 up to 400x400
- stainless steel: 82x82 up to 230x26
- thermoplastic: 50x52 up to 254x361
- polyester: 250x300 up to 500x600
|
|
A completely new housing concept facilitates the simple connection of up to 19 special cage-tension spring clamps from Wago and can be directly snapped onto the housing. To bonding to the board on the housing cover accepts the associated power strip.
Advantages of the new concept:
- Freeley accessible, large wiring space
- Plug-in cable entries
- Modern, screwless clamping technology
- Rapid exchange of the automatic control engineering without dismantling the electrical connections and the housing underpart.
|
|
Often overlooked until the last minute, the terminal box plays an important part of most projects.
Although a price sensitive product, the terminal box is traditionally used in large quantities and needed in a hurry. After reviewing our current range of terminal boxes, we have decided to reduce the number of sizes and options available, and concentrate of a number of core sizes. Our intention is to invest in more inventory, albeit in fewer sizes, so we can offer more product from stock more of the time.
|
|
From simple emergency stop switches to complete industrial PC's or CNC units - such complex modules need to be adapted to the rough conditions prevalent in industrial environments.
ROSE operating, display and mobile control enclosures provide reliable protection to the built-in electronics while offering a high degree of user comfort.
Depending on the area of application the enclosure systems can be adapted individually to provide higher protection degrees.
|
|
The modular aluminium enclosure CC-4000 from Bernstein is a high value housing for industrial controllers and automation components in protection degree IP 65. Alu-minium profiles in different depths are easily assembled for their own or in combina-tion to create the desired housing dimensions in width and height. For better func-tionality a swivelling front door or rear cover provide direct access to internal circuits. The Bernstein suspension systems and base brackets guarantee the best integration of the housing at the customer's machine or plant. High functional accessories re-plenish the program to a high standard automation system.
|
|
|
|
|
|
AUTOMELEC proposes a complete pallet of services for the realization of boxes of electronics and automatism.
These services can go from the design until the realization of the tests:
- Analysis of the needs
- Choice of the components and establishment of the nomenclature
- Provisioning of the components constitutive of the box: wrap mechanical, components of automatism (driving disconnecting switches, protections, departures, relay and contactors, relays of safety, automats programmable, variable speed transmission, connecting terminals, etc...)
- Realization of the electric file with a producing software of CAM of the plans to the format dxf or dwg compatible with all the software of CAM
- Realization of the box installation of and machining
- Wiring in the respect of the standards and according to the specific rules of the customer (color of wire according to tension, type of connecting terminals, etc...)
- Classification and reference mark of all wire
- Realization of the beam of cables external with choice and provisioning of the cables, the sensors (end of the road, detectors inductive, capacitive, optical cells, etc...)
- Realization of the programs automats
- Tests under tension and validation of the functions
|
|
|
|
Cabinets, Boxes, Cases
