|
|
| Products 91 to 120 of 130 |
|
For mobile food: hoist, grab, overhead crane, machine & cart mobiles, lifting beam, control on the ground, conveyer, mobile distribution...
|
|
|
VAHLE Spring Operated Cable Reels serve for automatic winding of flexible power and control cables, hoses for gases and liquids. Typical application: Portal- and Gantry Cranes, Dockside-Ships- and Construction Cranes, Graps and Magnets, Electric Hoists and other material handling equipment etc.
|
|
- Spring cable- and hose reels -
Conductix-Wampfler spring cable reels provide the optimum solution for all hoisting and material-handling applications. Rugged, heavy-duty construction guarantees exceptional reliability under extreme operating conditions.
- Spring cable reels -
Spring cable reels are used for the automatic reeling of cables on various types of moving equipment. These include most hoisting and other material handling devices; e.g. portal cranes, grabs, magnets, lift and working platforms, machinery, excavators, mobile cranes, transfer cars, transport systems and skimmers in purifying plants.
- Spring hose reels -
Spring hose reels are used for the automatic reeling of hoses on various types of moving equipment. Mostly these machines are track-based and operate in a straight line. The orientation of these applications can be horizontal or vertical.
|
|
COXREELS® manufactures heavy duty industrial grade hose reels, cord reels and cable reels of the highest quality. Our leading, high quality, product line fulfills any conceivable application where a reel is needed. Coxreels’single pedestal style hose reels are designed to handle a wide range of applications such as air, water, oil and grease. These reels accommodate 1/4 inch I.D. hose up to 3/4 inch I.D. hose, and will hold lengths up to 100 feet on an automatic spring rewinding system. All reels are built of heavy gauge steel and have an adjustable guide arm to meet your specifications for a ceiling, wall, floor, or mobile installation. The standard latching device will hold any length of hose you need without any pull back tension.
Coxreels also features a safety line that will retract up to 80% slower than standard spring rewind reels.
|
|
The Cavotec manufacturing plant in France is specialised in spring-driven hose and cable reels which are produced in a large range for a variety of applications.
They are used in service workshops, in garages and in industry in general.
They are supplied with standard hose or cables, these reels are made in painted steel, with drum mounted on two sealed ball bearings and rotating swivels in stainless steel and brass.
|
|
- Narrow frame and compact mounting base.
- Non sparking ratchet assembly.
- Declutching arbor to prevent damage from reverse winding.
- Standard inlets 90° balanced pressure swivel joints 1/2" female NPT
threads.
- Standard outlets 1/2" female NPT threads.
- Pressures to 3000 psi (207 bar)
- Temperatures from -60° F to +250° F (-51°C to +121°C).
- Consult factory for other pressures & temps.
- 4-way roller assembly. Specify roller position.
- Constant Tension is available – consult factory.
|
|
|
The ReelTek's unique hybrid design offers great strength and reliability at a lighter overall weight than conventional reels. It is designed to hold 1/4", 3/8", and 1/2" I.D. hose up to 50' in length. It is suitable for air/water, oil, and grease applications. Other features include: Composite glass-filled polymer spring case, lath pawl mounts on guide arm to eliminate "latch-out" at full extension, ribbed base and upright, multi-positional guide arm that adjusts to seven different positions, and field tested long-life swivel. For more information about the ReelTek Series or Reelcraft in general, please visit us on the web at www.reelcraft.com.
|
|
F1500
For Utility or Breathing Air Hose
• Choose permanent crank rewind or chain & sprocket
drive powered by an electric or compressed air motor.
• Spring actuated pinlock, adjustable cam-lock drag brake
on crank rewind models.
• 90° ball bearing swivel joint, 1/2'' female BSPT threads.
• Outlet 1/2'' female BSPT threads.
• Other sizes/threads can be furnished and must be
specified.
• Rollers and roller mounting brackets are accessory
items.
Specify roller position.
• Standard finish is oven-cured enamel. Polished stainless
steel discs and sprocket with chrome frame extra cost.
• F and FL1500 reels pressures to 207 bar.
• FH1500 reels pressures up to 414 bar.
• Temperatures from –7°C to +204°C.
|
|
ReCoila® Gen III OA, OP, P and A series reels are an ideal compact solution for all gas welding, cutting and shielding gas hose applications. The Unique External Swivel design on the Oxygen and Fuel gas reels provides added safety and ease of O ring and seal replacement. When hoses are stored by wrapping them around the bottles or trolleys there is a greater potential of a fire risk. By installing a ReCoila® gas reel you not only create a safer working environment, but also
extend the hose life and gain productivity effi ciencies.
|
|
|
|
|
|
Application
The reel exhaust extractors – type ALAN are designed for extraction the exhaust
fumes emitted by vehicle’s exhaust pipe during the engine tests, adjustment and
diagnostics. They are applied in bus depots, garages and car service stations.
At economic optimal air extraction and simple use it captures the whole exhaust vol-
ume and removes them outside. The reel can be mounted directly under the ceiling
or to the wall or to column by means of a bracket set.
Structure
The reel exhaust extractor consists of a winding reel with the exhaust hose with a nozzle to connect at the vehicle exhaust pipe. The nozzle sucks in the am-
bient air, mixes it with the exhaust fumes to decrease the temperature. Exhaust extractors are adapted for hoses of diameters , 100, 125 or 150 mm. In all versions, the free overhang of the hose (fully recoiled on the reel) is 1,5 to 2
m.
The devices are produced with two sorts of reel drive:
1. Type C – spring drive for hose reeling. The hose is wound down manually and reeled up automatically upon the force of a spring mechanism. To
the equipment belong following elements:
band brake – to slow down the hose speed during winding-up,
ratchet device – which locks the hose in the required position (while it is being wound down),
rubber stopper – to be fixed on the hose, stops the hose after it is fully wound up onto the reel.
2. Type E – with electrical drive for “hose wind-up / down”. Inside the reel is placed a gear-motor (of low rotational speed and small motor rate).
Both types can be equipped with a shut-off damper which automatically opens and closes during reeling/unreeling of the hose.
|
|
|
Coxreels T Series "Truck Mount" spring driven hose reels are the toughest hose reels in the spring driven line. The chassis is strongly supported by dual pedestal-style arms that span from the roller guide bracket down to the sturdy mounting base. Triple support point to the shaft are complimented by Coxreels' original Super Hub support system. They are perfect to be mounted on stationary units or service and utility vehicles. This Series was engineered for low, medium and high pressure including air, water, fuel, oil and grease applications. The models are available in 3/8", 1/2", 3/4" and 1" hose I.D and accomodate 50', 75 or 100' of hose. The working pressures are available in 300, 1250, 1500, 2500, 3000, 4000 and 5000 PSI according to the desired applications.
|
|
The Series 7000 incorporates contemporary engineering and manufacturing techniques to give trouble-free performance. Reels are all steel constructed and compact for applications with critical space requirements. Hose I.D.s range from ¼ to 3/4, with available lengths up to 70ft.
These Industrious reels feature: full flow shaft and swivel for maximum product delivery, individually powder coated components, reel springs manufactured from the highest quality scaleless blue tempered steel, and adjustable guide arms for floor, wall, or ceiling mount.
|
|
Gen IV E - Electrical cord / cable reels
The perfect solution to ensuring cables and cords are stored safely when not in use. 240 VAC 10, 15 amp
Hose id (diameter): n/a
Hose length: cable length
Rewind Method: Spring driven
|
|
•Highest quality ‘finished edge’ Spring steel strip
• Full fl ow full DR brass swivels and fl uid paths
• Positive crimp hose fi ttings
• All position positive latching system
• Tough, impact, corrosion resistant and UV stabilized
Polypropylene with Anti static and fl ame retardants
• Unique ratchet tensioning system
• Heavy Duty wall mounting swivel system
• Replaceable protective mouth guard
• Large side covers for easy access in servicing and maintenance routines
• Food grade approved materials
• Unique service locking pin port for added safety
• Two part fully adjustable bumper
• Detailed operation and service manual
• Easy mount drill hole pattern supplied
|
|
SSN700
Spring Rewind Reels
For Lubrication, Potable water, Chemical
Transfer, Washdown, Corrosive Environments
• Standard SSN Series has a narrow frame and compact
mounting base.
• Non sparking ratchet assembly.
• Declutching arbor to prevent damage from reverse
winding.
• Standard inlet 90° ball bearing swivel joint 1/2"
female BSPT threads.
• Standard outlet 1/2" female BSPT threads.
• Standard Pressures 207 bar, available up to 690 bar.
• Temperatures from -7°C to +204°C.
• 4-way roller assembly.
• Consult Hose & Reel Products for other pressures
& temps.
|
|
The printed products from a web press could be delivered as forms or sheets, as folded in various sizes or could also be rewound into a new roll, often called continuous (non-stop) roll-to-roll production.
MEGTEC supplies automatic rewinders for the printing and converting industries. The product line is comprised of small machines with web widths in the range of 14 inches (350 mm) up to large rewinders made for widths well over 40 inches (1000 mm). Depending on the model, the web speed could be up to 2,450 fpm (750 m/min).
All rewinders are specially designed to produce high quality rolls in a variety of materials producing rolls that are consistently firm right from the core. The perfect rolls produced in a MEGTEC rewinder increase your company's productivity and profitability.
|
|
|
Coxreels P-W and SHW Series spring driven welding hose reels are the ideal solution for managing bulky twin line welding hose. Coxreels’ dual hose welding reels add safety, efficiency and productivity to your welding operations and are suitable for Oxygen-Acetylene and Fuel gas welding applications. These self-retracting reels feature a spark free locking ratchet, brass swivel that is ported for safety, and an adjustable arm guide for wall, ceiling, floor and mobile equipment mounting. The support post and mounting plate are built from heavy duty 1/4" plate steel and have a solid 1" steel center support shaft. The reels manage 1/4 inch I.D. twin hose and will hold lengths up to 100 feet.
|
|
|
Hannay Reels provides rugged and durable welding reels to protect valuable hose and cable while improving efficiency and safety in arc welding, gas welding and cutting operations. The most prominent include power and manual rewind arc welding reels; dual arc welding reels; portable manual rewind welding reels; narrow-frame gas welding reels; and reels to handle longer lengths of oxygen and gas hose.
|
|
SWCR/WCR #2
Arc Welding Reels Power or Manual Rewind
• 400 amp rated rotary electrical device.
• Instant use with any cable length unwound.
• For use with single conductor electrode cable or
grounding lead.
• Quick connection to your welder.
• Gear driven crank rewind, chain & sprocket powered
by an electric, hydraulic or compressed air motor or
spring rewind.
• Auxiliary rewind and Pinion brake standard on Series
WCR reels.
• Non sparking ratchet assembly.
• Declutching arbor is provided to prevent damage from
reverse winding.
• 4-way roller assembly. Roller position must be specified.
• A cable stop should be used on Series SWCR.
|
|
| ... products without technical information |
| |
|
|
Reels, Decoilers
