|
|
Designed to handle both large and small diameter hoses in areas where hoses are required to be completely rolled into drum or rolled high enough to allow passage of overhead cranes, high vehicles or large equipment
Features
- Radio Remote Control
- Electrical control box included
- Maximum temperature of 1200° F
- Standard hose diameters of 4, 5 and 6 inches
- Galvanized steel
- Powder coated finished
- Outlet is 6 inches
- Can be ceiling suspended or wall mounted
|
|
HOSE REELS FOR WATER - LOW PRESSURE
HOSE REELS FOR HOT WATER - HIGH PRESSURE
HOSE REELS FOR HOT WATER - EMPTY (NO HOSE)
- Fixed or mobile stations
- daily tasks and occasional chores
- indoors or outdoors
Hose protection
Epoxy coated steel case protects retracted hose
Strong steel spring automatically rewinds hose after catch is released
Easy operation
Mounting bracket: wall or ceiling, fixed or pivoting support Stop catch: automatically stops the hose at the desired length
Efficiency
Air inlet: nickel-plated brass coupling, 360° rotation
High quality hose: food-grade rjubber
Connection: hose connects to tool quickly with automatic coupling
Safety in use
Automatic hose storage after use protects the operator against any risk of accident
|
|
|
|
|
|
When producing of forming product used coil, that device which is to release the coil for feeding divides into an automatic type and a manual type. The loading capacity is from 0.5 ton up to 20 ton. In case of the automatic type, you can use it with coil car, and it is easier to exchange coil and more convenient than the manual type.
Hydraulic Mandrel Type
It is the most popular uncoiler for the polyurethane sandwich panel making line and roll forming machine line. The mandrel shaft is operated by hydraulic and it has two kinds of inner diameter, Ø508 (20”) and Ø610 (24”). The frame itself has function of detail regulation so that it can adjust a center though after loading coil and it prevents to occur noisy because the mandrel shaft is designed to respond itself to a speed of roll forming machine.
Mandrel Type Un-coiler : Hydraulic Function
Generally it is used for forming coil with narrow width and the mandrel shaft is operated by manual lever. The loading capacity is about 200Kg ~ 3Ton.
Hydraulic Cone and Chuck Type
It is the most popular uncoiler for the sandwich panel making line. The frame itself has function of detail regulation so that it can adjust a center though after loading coil. Expansion of chuck is done by hydraulic.
|
|
TR C Series
Compact automatic coilers
Small sized and technically advanced automatic coilers. The two reels, the strapping machine and the pipe guide are mounted onto a traversing frame, fixed to a bedplate, to allow a single central exit in the same direction of the extrusion line. Such frame, peculiar of FB Balzanelli coilers, makes any packing operation or any automatic processing after coiling easier. Each TR C Series automatic coiler can be fully adapted to fit customers’ needs, according to the pipe features or to the level of automation desired. Top models includes special technical features to avoid any operator’s action: even the size change is automatic without stopping the production.
|
|
Setting up and tearing down your audio/video equipment is faster, cleaner, and easier with Hannay cable reels. Specifically designed for:
- Production & Recording Facilities
- Television & Radio Stations
- Live Events & Concerts
- Mobile Broadcast Units
- Satellite & Cable Companies
Hannay AV and AVX Series reels feature all steel construction, stackable design with ergonomic carrying handles, and non-reflective black matte finish.
|
|
DRUM WINDING MACHINE CAPACITY 700KG
ART. BOB-MAT
Mobile compact and practical cable winding machine , CE marked, shaft loading for drums Ø up to 1000mm. Complete with metercounter for cables Ø up to 60mm, electronically controlled variable speed single or three-phase motor , available for delivery with optional extras on demand to get a best performance.
|
|
SERIES 1700, IP65: with cable HO7RNF from 3 to 5 drivers...
Open version varnished aluminum. Automatic recall by spring, pawl
of stop (can be removed). Option: flange out of bracket (code 13.703),
pivot (code 13.1701), guide cable swivelling (code 13.1704) to see below.
|
|
Metal Cable Reels
Hot-dipped galvanized steel plate drum, stable zink coated foot frame, drum brake. Ergonomic handle. Overheating protection by thermal switch. 4 socket outlets 2PE 16A/250V. Packed in cardboard boxes, easily stackable. Labeled with EAN code and descriptive specifications.
|
|
Professional Cable Reels
Drum made of highly unbreakable special plastic. Very strong, shock absorbent, plastic-coated double tubular frame. Ergonomic handle. Big knob to tighten brake. Overheating protection by thermal switch. Equipped with 3 socket outlets 2PE 16A/250V, shock and splash proof. Easy unreeling of the cable. Polyurethane cable suitable for heavy duty construction site use. Extremely abrasion-proof and oil-resistant, in orange safety colour. Packed in cardboard boxes, easily stackable. Labeled with EAN code and descriptive specifications.
|
|
Scaffolding and Roofer´s Extension Reel
Drum made of highly unbreakable special plastic. Very strong, shock absorbent, plastic-coated double tubular frame. Ergonomic handle. Big knob to tighten brake. Overheating protection by thermal switch. . 3 ways socket outlet 2PE 16A/250V. Easy unreeling of the cable. Packed in cardboard boxes, easily stackable. Labeled with EAN code and descriptive specifications.
|
|
Economical Range Of Cable Reelsl
Drum made of unbreakable thermoplastic material, a stable zinc coated foot frame that is shock absorbent, and a drum brake to avoid unreeling. Overheating protection by thermal switch. 4 socket outlets 2PE 16A/250V. Packed in cardboard boxes, easily stackable. Labeled with EAN code and descriptive specifications.
|
|
Safety Cable Reels
Drum made of unbreakable thermoplastic material, a stable zinc coated foot frame that is shock absorbent, and a drum brake to avoid unreeling. Ergonomic handle. Overheating protection by thermal switch. 3 socket outlets 2PE 16A/250V, shock and splash proof. Packed in cardboard boxes, easily stackable. Labeled with EAN code and descriptive specifications.
|
|
WELDING CABLE reels
The series CEA & WC are designed to increase safety in the work area with a resulting increase in efficiency and productivity.
Hose id (diameter): n/a
Hose length: n/a
Rewind Method: Spring driven
|
|
670 C Coiler
Marken Manufacturing offers a wide range of coiler and spoolers for all types of material, lengths, and diameters. Options include loose coiling, or rewinding onto spools. Accessories include analog or digital measuring devices.
|
|
TRPE series
This is a reference item for coiling smooth PE pipes: all the peculiarities of this kind of pipes have been spotted and fixed with state-of-the-art technical solutions. Each automatic coiler of the TR PE series allow to coil the widest range of pipes available in the market, keeping the optimum reel dimensions according to the standards. By using two strapping machines, high production output are achieved, also with short coil lengths. E.g.: reels of 25m to 120m/min can be obtained with irrigation pipes; PEX pipes can be coiled at 180m/min in 100m reels (off line). The frame is robust and stiff, designed to cope with high speeds.
|
|
Spooler/Take Up TU80/200AT
The shown Payoff is motorized and able to pay off wires from spools of Ø 80 - 200 mm. It is built as a modulus design unit with transparent shielding and working-signal light.
The winding speed is controlled by dancer and adapted to the following working process. The tension is adjusted by spring load of the dancer.
|
|
Dynamics and reliability, user friendliness, plant safety
and short set-up times are features of the decoilers made by ARKU. They accommodate coils weighting up to 30 tons.
|
|
Horizontal decoiling reels
Hydraulic coiling and decoiling reels
One-sided vertical reels
Double-sided decoiling reels
Customised coiling and decoiling reels
Our coiling and decoiling reels covers a wide range of applications in the sheet metal proccesing. According to the needs and wishes we produce different reels. The maximum strip width is 2000 mm and the maximum strip thickness 7 mm. The loading capacity goes up to 25 t.
Base frames of decoilers are manufactured as rugged welded constructions. The internal and external diameters of the coils are aligned to norm. There are various possibilities of braking and drive modes.
The spreading is operated hydraulically by shuffled cotters. Decoilers with low capacities are partially operated by bell-crank lever systems.
Further accessory equipment, like:
- double decoiler,
- press rolls,
- conical drums,
- coil load cars, etc.
relievable the coil change, coil load and coil feed.
|
|
Single coil unwinder for any kind of cable, coil size Ø 295mm outside, 180-80mm inside; 80mm high
Highest performance of TRONÍC to unroll any kind of cable
thanks to its new singular shape even without holder by
simply laying it on any surface.
Extremely light , just 0.7 kg, free and easy to unroll. No
cable could become twisted inside the box at any speed.
Very serviceable and practical way to put the coil in
thanks to a simple pressure in the middle of the box
to remove the top cover and the easy solid rack
adjustable system to fasten the coil.
|
|
Application:
The MRH and MRM reels combine Minster's considerable knowledge and experience with thoughtful customer feedback and extensive market analysis. The result is a line of reels featuring carefully thought-out improvements and very competitive pricing that will increase your productivity and profits. The MRM reels are manually operated, offering a high-quality, low-cost alternative to our hydraulically-powered MRH reels for light duty applications.
|
|
UNROLLER WITH BARS 514/8/1
Model with 8 or 10 bars
Strong frame conceived for 10 rolls of 35kg and 350mm of diameter
4 wheels Ø 125mm polyamide (2 with brakes)
2 free rolls to feed the fabrics towards the cutting table
Spécial models on request
|
|
Decoiler with hydraulic spreading
Decoiler with hydraulic spreading, semi automatic adjustable coil guards and movable coil cradle.
Techn. data:
Coil weight: up to 8000 kg
inner diameter from 420 up to 520 mm
Outer diameter of coil: 1600 mm
Band width up to 1200 mm
Thickness of band from 0,5 up to 3 mm
|
|
KA-800
Coil Payoff with dancer-compensator.
Tension adjustable by flyerarm braking plus straightening rollers.
DP630AT und DP800AT Driven Tangential Payoff
This Driven Tangential Payoff with tension and rpm control by sensor and frequency inverter is used to feed extrusion lines and bunching machines as well as stranding machines.
The spools shaft with bearings on one side is driven by an AC synchronous motor with freqency inverter.
This Payoff is also available as double head machine.
Constant Tension Tangential Payoff with brake type 600
Tension adjustable from 2,3 - 30 N
Smallest dia of decoiling Ø 150 mm
Biggest flange Ø 405 m
Max spool weight 50 kg
|
|
- Aircraft Refueling
- Chemical Plants
- Grain Elevators
- Rescue and HazMat Operations
- These reels bond and/or ground aircraft, fuel trucks and
other equipment.
- Provide smooth operation and require minimum cable pull.
- Declutching arbor and adjustable guide arm with cable guide.
- Optional stainless steel construction of spool, frame &
ratchet system available on HGR series.
- Standard finish is oven-cured enamel.
- Also available, manual rewind version.
All shown with optional cable and/or “Y” branch.
|
|
Reeling drum for grounding, earth application
for Ex, Atex, Hazardous Zone with Earth Ex, Atex clip
Payout 5 to 30m
new version with pivot
|
|
Reel for earthing of tanker, mobile machine, cart, oil terminal, drum, station gasoline, gas oil station, tank etc
Delivered with pliers of earthing.
|
|
GR75
Static grounding reels for refueling or hazardous areas.
For Aircraft Refueling, Chemical Plants, Grain
Elevators, Rescue and Hazmat Operations
Hose & Reel Products static grounding reels provide for
the payout, retraction and compact storage capacities of
up to 61m of grounding cable. These spring rewind reels
are used in any flammable atmosphere where a build-up
of static electricity could cause a spark and
subsequent explosion. They bond and/or ground aircraft,
fuel trucks and other equipment during refueling or other
hazardous operations. Their spring motors provide
smooth operation and require minimum cable pull to release
the lock. A declutching arbor automatically disengages
the spring to prevent damage from reverse winding.
All models have an adjustable guide arm with cable guide
to prevent cable build-up during rewinding. The arm can
be locked in any operating position in a 270° arc.
Static grounding reels for refueling or hazardous areas.
|
|
|
|
|
|
DIMECO offers a comprehensive range of uncoilers for coils from 50Kg to 25 tons, up to 2000mm wide.DIMECO uncoilers can afford 1,2 or even 4 coils. They are equipped with a pneumatic brake or driven.
Gifted with a particularly robust design, our machines are manufactured in mass production and can be fitted with a number of accessories, which improve stamping line productivity and enhance personnel safety (pressure arm, lateral guides...).
Our coil-car range from 1 to 25 tons makes coil handling easier.DIMECO uncoilers own dedicated features to process HLSA steels or delicate material (pre-coated, copper, mirror finished aluminium...)
The « PITSTOP » configuration allows automatic strip feeding and recoiling and offers an automatic line parameters adjustment when selecting a new job in the press terminal.
Our machines can uncoil from top or bottom, clockwise or anticlockwise and even without loop.
When combined with a DIMECO roll feeder, DIMECO uncoiler speed is automatically tuned to the press rate and to the feeder output.
|
|
|
|
Reels, Decoilers
