|
|
| Products 91 to 120 of 128 |
The Master Link can be made by FORGED OR WELDED.
Shape: Oblong, Round, Pear or Delta, Omega, or D-shaped.
Oblong Master Link:
Welded according standard of DIN5688, Or engineer Flat
Master Link Type A-342 by Welded.
Master Link Type A-342 by Forged.
Master Link With Flat Part Welded.
Master Link EVM Series Germany type Forged.
Master Link 8004 or 8005 with or without Flat.
Master Link Assembly, Sub Master Link
MT OR MTC Master Link
Master Link Assembly with Welded.
Master Link Assembly with Flated.
Main Link forged or Welded.
Master Link Assembly according DIN5688 without flat.
Forged Round Ring.
forge D-Links with plate for welding
forge D links or welded D-Ring.
Forged Delta Ring.
Forged Pear shape Link
Forged Omega Link, Forge Belt Ring with crosspiece.
Welded Triangle Ring.
Foged D ring with wrap.
Grade 80 D ring with spring.
Forged Grab Ring.
More Links and Rings please contact with TOOLEE GROUP INC. QINGDAO LIFTING AND RIGIGNG CORP.
You are welcome. |
|
Ratchet Tie Down (European market)
Ratchet lashing are used for fixation cargo while transporting, shifting or moving, storage.
After locking, no relax during transportation, safety, saving, light, easy to use, and no damage for cargo.
**100% high tenacity polyester of lashing strap
**Low elongation
**Popular color of strap:orange,blue,yellow,red,black
**Width available:25mm to 100mm
**Breaking strength scope:0.5t to 10t
**Length available:1m to 10m Loose end length by customers requires.
**According to EN 12195/2
others name: cargo tie down, cargo straps, tie down, cargo lashing
Warning:
1.Only use undamaged ratchet lashing, the label indicating the capacity must be clearly legible.
2. Ratchet lashings must not be overload.
3. Do not tie knots in the webbing.
4.Protect the webbing against abrasion and/or cutting by using edge protectors and sleeves for sharp edges.
5.Avoid twisted positioning of the ratchet lashing.
6.Do not place loads on the ratchet lashing, which could cause damage.
7. Ratchet lashings should not be used as a load lifting gear.
|
|
SANDOW AVIA technical elastic shock cords, also called bungee cords, are designed to meet aviation standards., particularly French aerospace ASNA standards.
Force /extension properties are guaranteed for a given diameter and a given elongation. (maximum 100%)
Shock cords from 4 to 30 mm in diameter will resist tractive forces of 1 to 400 daN respectively. |
|
Turnbuckles
Reference: TE.1-36.2
Weight: 18
Dimensions: 1350 - 950
Material: Forged steel
BL: 36
S.W.L.: 18
Finished: Galvanized
Counter Parts : Bars |
|
| Current quality shock cords (also called bungee cords): diameter 2 to 20 mm, with approximately 100% elongation, are available in a choice of cotton, polyamide, polyester, polyethylene and polypropylene braided fabric sheathes |
|
Self-certified with Working Load Limit (W.L.L.) and Safety factor of 5 for fastening, securing in Paragliding (connecting the ripcord to the risers)
NOT AVAILABLE: STANDARDS EN 362 + EN 12275 certified for Personal Protective Equipment (P.P.E.) in industry & mountaineering, Climbling, Caving activities - Breaking Limit: 25Kn longitudinal / 10Kn transversal |
|
Turnbuckle:
Turnbuckle Frames DIN 1480, drop forged- Electro Galvanized
Turnbuckle Frames DIN 1478, Electro Galvanized
Turnbuckle DIN 1478, Pipe Body Type Eye & Hook
Hamburger DD Turnbuckle - Lashing Turnbuckle
Rigging Screws Eye & Eye Turnbuckle HDG
Rigging Screws Jaw & Eye Turnbuckle HDG
Rigging Screw Jaw & Jaw Turnbuckle HDG
Turnbuckle DIN 1480 Eye & Eye- drop forged - Rigging Hardware
Turnbuckle DIN 1480 Hook & Hook - drop forged- Rigging Hardware
Turnbuckle DIN 1480 Hook & Eye - drop forged -- Rigging Hardware
Turnbuckle Mallable Commercial Type
Turnbuckle Stub End Drop Forged - US Type
Turnbuckle Drop Forged Jaw & Eye, US Type
Turnbuckle Drop Forged Jaw & Jaw - US Type
Turnbuckle Drop Forged, Eye & Eye - US Type
Turnbuckle Drop Forged Hook & Eye - US Type
Turnbuckle Drop Forged Hook & Hook - US Type
Turnbuckle-General Information-Rigging Hardware
Wire Ropes and Fittings | Synthetic Slings | Chains and Accessories | Marine Hardware | Stainless Steel Rigging | Rigging Hardware | Grade 80 Alloy Fittings | Chain slings | Wire Rope Slings | Transport Secures | Friendly Links |
Tel: +86 532 88668543 Fax: +86 532 82737869 Email:info@rigginglifting.com
Copyright © 2007 Toolee Group |
|
DSS and DSS+C Ring / Double Swivel Shackle
Double articulation allows it to line up perfectly with the sling
Tightening by Allen key
From M33 to M64 as standard; for loads from 6.3 t to 32.1 t
From UNC 1¼" to UNC 2" as standard; for loads from 14,000 lbs to 50,000 lbs
Other variants of fitting bolts on request
|
|
Double-ball bearing - for smooth lifting and turning operations
The first generation of lifting- and lashing points with an universal connection for every sling means (hook- and ring assembly, basket chains, round slings, loops, etc), all complete with double-ball bearing for smooth lifting and turning operations. The optimized design avoids damage to the sling means and the precious load during turning. Maximum WLL with smallest thread diameter. Version PP-S: The standard universal connection by eye hooks for master link assemblies, round slings, wire ropes, hook assemblies...
|
|
Product Description:
Made from Endura Braid, a double braid with a very high strength, extremely low stretch HMPE core with a durable polyester cover. Higher strength-to-diameter ratio enables smaller diameters to be put into service which can be advantageous when winch drum/take up length is a limiting factor. Eyes can be spliced on one or both ends and are available soft or with your choice of thimbles. We offer Galvanized, Heavy Duty Galvanized, Bronze, and Stainless Steel thimbles.
Features:
Factory spliced Eyes
Optional urethane coating can be applied to entire assembly or eyes only.
|
|
| ... products without technical information |
| |
|
|
Chains, Cables, Ropes, Hooks, Pulleys
