|
|
DSR and DSR C Ring / Double Swivel Ring
Double articulation allows it to line up perfectly with the sling
Two ways of tightening: either by open-ended spanner, or by Allen key
From M8 to M30 as standard; for loads from 0.3 t to 6.3 t
From UNC 3/8" to UNC 1" as standard; for loads from 1,200 lbs to 10,000 lbs
Other variants of fitting bolts on request
|
|
ACTEK® HD-Series - hoist rings
Specials
- 5:1 Safety factor
- 200% proof load tested
- Serial numbers for traceability
- rotates 360° and swivels 180°
- magnetic partical inspected
- easy mounting, only one thread or hole is required
- also available as WKA-System for assembling the
tower segments of wind generators. With only six
hoisting units, 100% of your tower segments can be lifted.
|
|
Can be turned by 360°, adjusted to the direction of pull
The RUD lifting ring >VLBG< can be turned by 360°, aligned to the direction of pull, the load ring can be tilted, guaranteeing full WLL in all load directions. Complete with a 100% crack detected hexagon insert socket screw for universal use of tools. The maximum lengths of the screws are adjusted in a way that a material thickness of abt. 8xM (with M8 to M30) or 5xM (with M36 to M48) can be mounted by using a hexagon nut (ISO 7084/7090).
|
|
TSR and TSR+C Ring / Triple Swivel Ring
Triple articulation allows it to line up perfectly with the sling
Allows the hook to move parallel to the supporting face of the ring being drawn at 90°
Two ways of tightening: either by open-ended spanner, or by Allen key
From M8 to M56 as standard; for loads from 0.3 t to 22 t
From UNC 3/8" to UNC 2" as standard; for loads from 1,200 lbs to 50,000 lbs
Other variants of fitting bolts on request
|
|
The lifting ring for turning operations
The heavy duty lifting rings >WBG-VWBG< have a ball-bearing swivel and are suitable for turning and tilting of loads.
Simple assembly, only one tapped hole is required. Available with different thread lengths.
|
|
The lifting ring for turning operations
The heavy duty lifting rings >WBG-VWBG< have a ball-bearing swivel and are suitable for turning and tilting of loads.
Simple assembly, only one tapped hole is required. Available with different thread lengths.
|
|
Force distribution by 2-point-attachment, required thinner welding seams.
The lifting eye weldable VRBS / RBS is prepared for the direct welding at the transport goods. The welding blocks (made of easy weldable material 1.0577+N (St. 52-3) have been provided with distance nabs as gap indication for the weld and stamped with the WLL identification number. The ring latch can be tilted by 180°, made of high-tensile material, 100% crack detected and thus overall loadable.
|
|
For the quick assembly, a welding block with patented distance nabs.
The load ring, ready for welding, VLBS / LBS is prepared for the direct welding at the transport goods. The welding block (made of easy weldable material 1.0577+N St. 52-3) has been provided with distance nabs as gap indication for the weld and stamped with the WLL identification number. The load bracket can be tilted by 180°, made of high-tensile material, 100% crack detected and thus overall loadable. By a protected spring, the suspension bracket can be maintained in every position; the parts are connected with each other in an unloosable way.
|
|
GRADE 70 CHAINS WITH HOOKS
Flatbed Truck and Trailer Tie-Down Chain for Cargo Control. Also called tow and binder chain, binding chain, boomer chain, load chain, and coil chain.
G70 GOLD CHROMATE FINISH
CLEVIS GRAB HOOKS INSTALLED
LINKS STAMPED FOR DOT COMPLIANCE
NOT FOR OVERHEAD LIFTING
Size avaiable: 5/16", 3/8", 1/2", auto welding with alloy steel.
Transport Chain Features
Transport chains are designed and manufactured to suit rigorous requirements of the local transport industry
Chains clearly identified, and showing appropriate lashing capacities
Proof tested
Test certificates available on request
Complete range of transport chain and accessories
Comprehensive selection of grab and claw hooks
Available in convenient load binder chain
Benefits
Long product life
High resistance to wear
Strong, durable, lightweight
Easy handling, easy lashing
Simple, at-a-glance selection of size and number of chains required to suit a load
|
|
• Telescope action jacks; for corner routes
• Suitable for laying lines of cable
• For pit cable inlets or outlets.
• For laying cables over ducts corresponding to corner passages.
• For the horizontal positioning.
|
|
|
|
|
|
JETnet® is based on a flexible network architecture with OFC-cables and is applied for long distances as well as for local applications. This solution offers especially for the "last mile" largest possible flexibility for extending transfer capacities with customers and for optimised investments.
That system is developed as a unit construction system using many known components and is completed with construction elements and technologies adjusted to special application purposes. It is based on an individually applicable tubing system embedded in standard HDPE protection tubes. With the tubing system OFC cables adjusted to customer requirements can be blown in without splicing. Extension on customer request can be realised quickly, without engineering operations and at low cost.
In many countries worl-wide the JETnet® priciple has proven its functionality and cost advantages. Projects have been realised in Germany, too. Its module construction principle with simple technologies realizes quick reaction on new projects and changed customer requirements. A complete product range of construction elements of cables and tools is available, being excellently qualified for rough field application. As it is compatible with already existing protection tube systems it extends the universal application possibilities and offers the solution necessary for a future orientated connection network.
Besides offering and supply of JETnet® components Draka Comteq offers additional support for planning of microcable routes of FTTH-networks.
|
|
Cargo nets to load and unload from ships by cranes, for approx. 2.5 tonne loads. 4 snap hooks are incorporated into the nylon peripheral rope. When the net is tensioned by a load, the peripheral rope is drawn together, thereby forming an 8-strand oval load support. Of the 4 snap hooks, only 3 come loose when unloading; the fourth stays fastened to the crane hook. During unloading, 3 snap hooks are loosened and the crane lifts the net using the fourth snap hook. Loading/unloading procedures are therby faster.
|
|
CSS Ring / Central Safety Shackle
Allows a closed mould to be raised that may weigh up to 32 tonnes
|
|
Maximize the performance of your vacuum chamber equipment with Vacuum Wrapper Chain from Tsubaki. High-grade materials mean our chains last longer in extreme heat and resist corrosion from sanitary washdowns. Special manufacturing techniques and precise pitch control ensure smooth sprocket engagement for extended wear life, even at high speeds.
Choose Vacuum Wrapper Chain from Tsubaki and pack real value into your operation.
|
|
Grade 80 Chain Slings, Overhead Lifting System ,Chain Slings.
Single Chain Sling, Double Chain Sling, Triple Chain Sling, Quadruple Chain Sling.
Slings General information, Slings Introduction, Chain Sling Fitted with safety hook, sling hook, grab hook, foundry hook.
Coupling link is the main connecting link in the sling's system.
|
|
|
By using THIELE sling-chains and forged components in quality grade 80 you ensure safety in production, transport and installation of technical facilities and heavy components. THIELE sling assembly system facilitates in addition to the simple self-mounting also a fast alteration when different transport demands are required.
|
|
VIP-Master link single strand VAK 1/2-4
Forged master link specially developed for the 4mm VIP lifting chain
Manufactured in compliance with DIN EN 1677-4.
Suitable for a single - leg central connection.
Can also be used as an end link (Remove the identification tag).
|
|
The food industry demands the most from power transmission products. Sanitary conditions, precision indexing requirements, extreme temperatures, corrosive environments — these are just some of the reasons why you need Tsubaki. We build high-performance power transmission products — attachment chains, standard and specialty roller chains, engineering class, sprockets, and power transmission components — for a vast array of food applications. From ovens to freezers, from processing to packaging, Tsubaki food industry products keep your operation moving at maximum efficiency.
Count on Tsubaki for the top food chain so you stay on top of the food chain.
|
|
The mining industry demands the most from power transmission products. Tough operating conditions, high shock loads, dirt, moisture, and acidic environments take a toll on your equipment. That’s why you need Tsubaki. We build reliable, high-performance chains, sprockets, and power transmission products for underground and surface mining applications. Put us to work to extend the performance of continuous miners, haulage systems, shuttle cars, feeder breakers, scoops and loaders, preparation plants, power shovels, draglines, blasthole drills, crushers, pulverizers, screens, and hoppers.
Whether you are an original equipment manufacturer or you want to maintain or revitalize existing equipment, count on Tsubaki for maximum performance.
|
|
THIELE produces round link chains for the mining industry in rated sizes of 14 up to currently 42 mm according to DIN 22252.
Our development of calibration for long chain strands at the beginning of the seventies made the use of the general twin inboard chains possible. For even higher precision we use modern, computer supported calibration processes.
|
|
Clevis Lifting Sling Hook With Latch
Clevis Lifting sling hook without latch
Suitable for use with Grade 80 chain in overhead lifting applications as long as hook is Proof Tested as part of the chain sling assembly or as an individual component.
Forged Alloy Steel - Quenched and Tempered
Fatigue rated at 1-1/2 times the Working Load Limit at 20,000 cycles.
Individually Proof Tested to 2-1/2 Times the Working Load Limit with certification.
Toolee Group Inc.
Qingdao Lifting And Rigging Corp.
www.rigginglifting.com
|
|
VIP-Mini-hook VMH-4
A robust improved version. The safety latch engages in the tip of the hook and is thus protected against lateral bending.
With a triple coiled corrosion protected double leg spring. Connecting bolt and tensioning sleeve are pre-assembled.
|
|
Container Hook VCH 20 with Safety Locking Device
Suitable for ISO container edges. With a patented safety locking mechanism. A clevis connection for the 22 mm VIP chain. Using a VRG - 16 connector, the chain diameter can be reduced and thus a 16mm VIP - chain can be used .
Attention: RUD-VCH 22-Hooks are not suitable for vertical lifting. Given a minimum inclination angle of 30° during the lifting process, the hook cannot automatically open.
Connecting bolt and tensioning sleeve are pre-assembled.
|
|
Nickel-Plated Chain
Diamond Chain produces a full line of Nickel-Plated roller chains for a variety of uses in environments where the chains are exposed to moisture. Common uses include applications exposed to the weather, high humidity or those on machines that are frequently washed down with water. Diamond Nickel-Plated chain is different from many rust-resistant chains, because Diamond electroless nickel plates all of the components before assembly, virtually eliminating the possibility of stress-corrosion cracking. Pre-assembly plating also ensures all components are plated, which prevents internal rust from seeping out and causing contamination.
|
|
Tsubaki has developed groundbreaking surface treatment technology that provides better corrosion resistance in a stronger, longer-lasting chain. The anti-rust performance of Neptune Chain lasts twice as long as traditional zinc coating and ten times longer than nickel-plated chain in operations exposed to water, seawater, or outdoor conditions. Neptune Chain is the only corrosion-resistant chain with a chromium-free coating, which means it won't expose your plant or your personnel to hexavalent chromium — a known carcinogen that may be harmful if inhaled or absorbed.
Protect your plant and personnel while providing super-strong rust block.
|
|
|
|
|
|
If demanding conditions have got you concerned, Tsubaki Engineering Chains will help guarantee the competitive edge you need. Whether your operation requires a sanitary environment or is exposed to corrosive chemicals; is heated to extreme temperatures or run through a freezer; is exposed outdoors or affected by excess moisture, our specially designed and tested chains will outlast your current chains and contribute to a cost effective application. Where standard chains are "just fine", our Engineering Chains will show you just how far your money ought to be going - hour after uninterrupted hour of trouble-free performance.
For reliability and actual results choose the name more and more industry leaders are turning to for answers to their increasingly complex and diverse chain applications. We've developed chains to deliver high quality performance even under the most extreme conditions.
After exhaustive research into the variety of extreme application environments facing today's operations, we've added a number of new chains to our reliable stainless steel series to create a full lineup.
|
|
|
|
|
|
1. Problem/Initial situation
Chains in corrosive media have to possess high fatigue and wear resistance. Chains made of standard steels corrode quickly whilst stainless steels made of V2-A steel do not withstand these stresses. Nickel-plated or galvanised chains only offer limited corrosion-proofing because the coating is destroyed by abrasion.
2. iwis Solution
iwis high performance chains made of hardened high-alloy steels with good corrosion resistance and significantly higher strength than stainless steel chains.
3. Highlights
- Very high wear-resistance - comparable with iwis standard chains
- Very good and long-lasting corrosion resistance - in comparison with surface-coated chains
- Significantly higher fatigue resistance and breaking strength figures than stainless steel chains - smaller dimensions possible
4. Industrial Applications
- in food product processing
- in drinks manufacture
- in packaging machines
- in cheese and dairy technology
- in areas where there are moist or aggressive conditions
- in cleaning systems
- in (chemical) equipment construction
- Ideal where chains need to remain agile in difficult conditions where they are subject to corrosion and should not rust for hygienic or visual reasons.
|
|
The connecting link (coupling link) is designed to couple lengths of grade 80 alloy steel chain with matching fittings and appropriate master links. Special attention to dimensional detail allows the 'connecting link' link to accommodate the largest variety of proof-tested, certified grade 80 alloy steel lifting components available anywhere.
USING IN GRADE 80 CHAIN LIFTING.
Grade: G100, G80
*Materials:alloy steel, EN1677 material
*Surface treatment: color-painted, self-colored, polished
*Process: drop forged, heat treated
*Special specifications and marks can be made according to customer's requirement
*Packing: Plastic bags and cartons on pallets
* Design Factor 4 Proof tested and certified.
also named hammerlock/hammer lock
TOOLEE GROUP INC.
www.rigginglifting.com
|
|
Characteristics of the product
Heights: 8 to 40 mm (according to product) Widths: 20 to 56 mm (according to product)
Rails C asymmetrical and omega 35 mm for modular fixing of equipment.
These rails deliverable are perforated or not
Surface treatment: Rough untreated, électrozingué dichromate yellow or blue, hot galvanized Sendzimir 275 or hot galvanized with soaked.
Perforations special and put at length on request.
A range supplements clamps of fixing of cables or tubes with a diameter 6 mm to 110 mm out of steel galvanized hot with soaked, aluminum and stainless steel AISI 304 H adapted to the shaped rails and other
|
|
Designed with a 5:1 Design Factor.
The most complete line of Eye hoist hooks.
Eye hooks are load rated.
Fatigue rated at 1-1 /2 times the Working Load Limit at 20,000 cycles. High cycle, long life spring.
Can be proof tested to 2-1 /2 times the working Load Limit.
Low profile hook tip.
*Eye Hooks (3/4 TC - 22TA), Proof load is 2.5 times Working Load Limit. Eye Hooks (20 TC - 60TA), Proof Load is 2 times Working Load Limit. All carbon hooks-average straightening loads (ultimate load) is 5 times Working Load Limit.
A - Alloy Steel, C - Carbon Steel.
320A: eye hoist alloy steel hook, 320C: eye hoist carbon steel hook
TOOLEE GROUP INC.
qingdao lifting and rigging corp.
|
|
|
|
Chains, Cables, Ropes, Hooks, Pulleys
