|
|
Streamtek's compressed air operated Air Conveyor connects to standard tube, hose or pipe to create a powerful in-line conveyor. There are 6 sizes available in both aluminum and stainless steel to fit standard hose diameter for easy clamping. Threaded versions connect easily to regular pipe thread: 1" (25mm), 1-1/4" (32mm), 1-1/2" (38mm), 2" (51mm), 2-1/2" (64mm), and 3" (76mm). Special sizes can be manufactured if required.
A fast, low cost way to convey: Plastic pellets, Sawdust, Bulk Solids, Shavings, Textiles, Small Parts, Paper, Scrap Trim, Pills/tablets, Granules, Chips, etc.
ADVANTAGES OF AIR CONVEYORS
- Instant ON/OFF with no moving parts, no electricity or explosion hazard.
- Utilizing a pressure regulator will control the flow of material
- Quiet Operation
- Compressed air operated
|
|
|
|
|
|
VARIJECTOR® Jet Pumps, Blowers and Injectors
Varijector® jet pumps are ejectors driven by an interior ring nozzle, with free unblocked passage between the vacuum inlet and the blowing air outlet of the ejector pump. The pumps are driven by compressed air or other gases (e.g. Nitrogen). The compressed air is blown through a ring gab an directed diagonally inward in vacuum-flow direction. High turbulences of the blowing air catch surrounding air, both are blown into a internal diffuser nozzle.
Varijectors are available with inner diameters from Ø 5 to 50 mm and reach a maximum vacuum from -10 to -70 kPa.
They are generally suitable for injecting bulk materials and gases, for low positive pressure blow conveying, for mixing gases, for the textile fabric handling (threads), for wire and tubing drying process and for producing high volumes of blowing air, as they multiply the used compressed medium (e.g. for blowing of sheets, papers, cooling and process technique).
The ring-nozzle inside Varijector jet pumps is freely adjustable. So vacuum, air consumption and mixing ratio can be adjusted in a wide range freely.
VOLKMANN Varijectors are available in different materials e.g. in aluminium, stainless steel, high temperature steel, PE, PP.
Individual designs with special diameters and materials can be manufactured upon request.
|
|
The transport of hot materials confronts designers of conveying equipment with the most difficult problems. BEUMER apron conveyors are designed to meet the specific demands posed by this particular application such as high conveying capacities, long center distances, varying conveyor routes, handling of considerable conveying elevations and intermediate discharge locations.
BEUMER's product line includes apron conveyors, belt apron conveyors, hinged apron conveyors, deep bucket apron conveyors, and tipping tray conveyors.
|
|
|
|
|
|
The Rexroth TS 2plus transfer system is a multi-talented system, which guarantees economic production. It is a diverse modular system that meets the requirements of a broad spectrum of different products.
Special TS 2plus units
Apart from the different types of conveying media (polyamide belts, toothed belts, flat top chains and accumulation roller chains), the TS 2plus also provides an abundance of specific units including curves, transverse conveyors, position and drive units. In addition to this, the time and effort spent on planning and designing can also be reduced to a minimum thanks to the predefined macro modules.
TS 2plus Heavy Duty
The new heavy-duty components of the Rexroth TS 2plus transfer system optimize transport of heavy workpieces on small surfaces. The systematic use of steel parts instead of synthetic ones in critical areas permits continuous loads up to 200 kg per meter. Reinforced conveyor profiles and stainless steel guides combined with sturdy conveyor chains open up new applications in a variety of industries.
TS 2plus Lean
Lower investment and maintenance costs, as well as fast commissioning, are the main features of the TS 2plus Lean. Its easy-to-install components are optimized for small and light products of up to 10 kilograms. Users are thus able to save up to 20 percent right from the procurement phase, as compared to conventional solutions. Low overall costs for linking manual workstations and automatic stations in the TS 2plus Lean system enable streamlined production in, for example, the automotive supplier industry, electronics industry, or medical technology industry.
|
|
- designed for different production facilities
- based on accumulative roller chain conveyor or roller conveyors with accumulative friction rollers
- pallets or technological support plates (carriers) with transported material may lay directly on chains or rollers
- enable stopping-down of transported material at requested positions (and working on it), its accumulation, unloading of finished products from lines and return of empty pallets (carriers) on the beginning of assembly process
- assembly lines can be supplement with accessories - turntables, transfer tables, lifting or shifting devices, scaling, steel-strapping machine, wrapping machine, packaging machine etc.
- working positions can be equipped with overhead structures for lights, portable tools support rails, other pneumatical or electrical devices
- special lifting and turning equipment allow to manipulate with products on palettes (carriers)
- usually we delivery it with control system in accord with customer's wishes
|
|
|
|
|
|
The Rexroth TS 2plus transfer system is a multi-talented system, which guarantees economic production. It is a diverse modular system that meets the requirements of a broad spectrum of different products.
Special TS 2plus units
Apart from the different types of conveying media (polyamide belts, toothed belts, flat top chains and accumulation roller chains), the TS 2plus also provides an abundance of specific units including curves, transverse conveyors, position and drive units. In addition to this, the time and effort spent on planning and designing can also be reduced to a minimum thanks to the predefined macro modules.
TS 2plus Heavy Duty
The new heavy-duty components of the Rexroth TS 2plus transfer system optimize transport of heavy workpieces on small surfaces. The systematic use of steel parts instead of synthetic ones in critical areas permits continuous loads up to 200 kg per meter. Reinforced conveyor profiles and stainless steel guides combined with sturdy conveyor chains open up new applications in a variety of industries.
TS 2plus Lean
Lower investment and maintenance costs, as well as fast commissioning, are the main features of the TS 2plus Lean. Its easy-to-install components are optimized for small and light products of up to 10 kilograms. Users are thus able to save up to 20 percent right from the procurement phase, as compared to conventional solutions. Low overall costs for linking manual workstations and automatic stations in the TS 2plus Lean system enable streamlined production in, for example, the automotive supplier industry, electronics industry, or medical technology industry.
|
|
Feasibility studies.
Functional studies,
plane of establishment and execution.
Fields of intervention.
Studies and work.
Assembly and production lines.
Robotics.
Handling and convoying on the ground.
Machining - Iron work Mechanic welding…
|
|
PARCELS/CASES LINE
From the empty box up to the palletizer.
Technical Characteristics
We offer a complete service, from calculation of the preliminary study up to the bringing your lines into operation (handling of the electrification and automation).
Function
We work closely with your project structure and machine manufacturers for perfect integration and an optimised output of your lines.
|
|
CrisBag
Comprehensive baggage handling system combines sortation, early baggage storage, and transportation
Features:
Capable of speeds in excess of 7 nVsec (1380ft/min)
Handles more than 2,700 items per hour
One item per tote allows track and trace of each item
Tote designed for X-ray screening of baggage
Benefits:
Fast, safe, and flexible transport from check-in to discharge
Customized to meet specific customer requirements
100-percent accurate track and trace throughout the system
Eliminates unloading of bags for screening
|
|
Vanderlande Industries designs, builds and services leading baggage handling systems for airports of all sizes. These belt, tub and/or track solutions combine operational effectiveness (low IR rates), short connection times and high conveyability. Based on proven technology, in-depth business knowledge and industry best-practises, they deliver the highest availability, reliability and lowest costs per bag. That's what it's about.
|
|
|
count with balls steel 15,8mm where 25,4mm allowing to facilitate the transfer of the loads (cases, paperboards, flat-bottomed plastic vats) starting from 470 HT the meter ² (balls assembled on structure steel 30/10ème the step of 150mm
|
|
Ideal for conveying or working areas, allowing the movement
of items in any direction. Standard sizes feature optional adjustable
legs and also different conveying media to suit all applications:
- Omnitrack Ball Transfers for high load capacity applications and low coefficient of friction
- Omnifloat Ball Castors for sheet materials where instantaneous change of direction is not essential
- Omnisweep brushes for delicate support of lightweight items where coefficient of friction can be compromised
|
|
Multi-direction moving of loads.
Handling table made of steel balls for loads up to 60 kg/m.
Produced according to your dimensions.
|
|
|
|
|
|
Built on the same platform as the Posijet® Air Conveyor technology, the new Posimat VERTIJET has been developed to provide the market with an efficient and practical solution to Vertical Elevation and Loweration of empty PET bottles, handling inclinations anywhere from 15 to 90 degrees.
The new VERTIJET, with its double air chamber, can easily be integrated into our own Posijet® and other air conveyor manufacturers, or it can be used as a stand alone equipment, particularly for feeding bottles into Silos such as, Posimat's Posisilo®.
Supplied both in standard and custom designed units, VERTIJET easily adapts to customer requirements and specifications, incorporating innovative two side blowing chambers to keep the bottles perpendicular to bottle flow at all times. This is achieved by the use of individual bottle format PLC programs which guarantee bottle-to-bottle control at all times.
VERTIJET is capable of running single or multi-size bottles, ranging from 100ml to 2.5Liters. This range is handled by utilizing our unique automatic airflow control system and automatic bottle body guides.
As mentioned before, it will operate at any incline/decline angle of up to 90º, at speeds of more than 1.000 bottles/min. This means no reductions in line speeds maintaining high efficiencies, and because VERTIJET was conceived as a compact style equipment, it only occupies minimal foot print for it to operate, translating into increased valuable factory floor and easy access to all other equipment in the plant.
|
|
|
|
|
|
BEUMER is one of the leading suppliers of bucket elevators and has done pioneering work in the field of high-capacity bucket elevator technology.
The development of high-quality steel cables and the corresponding belt clamps and bucket mountings make sure that today high-capacity belt bucket elevators for conveying heights of 200 m and material flows of 2,000 m³/h and more can be realized.
BEUMER high-capacity chain bucket elevators are equipped with hardened, double-stranded round link chains with good wear resistance.
BEUMER high-capacity central chain bucket elevators are equipped with a stamped, single- or double-stranded chain, which are extremely wear-resistant due to extra-deep hardening of the wear surfaces, guaranteeing superior service life.
Both chain and belt bucket elevators have proven reliability in thousands of installations under the most difficult and even extreme operating conditions. For particular operational requirements, special bucket elevator designs are available.
|
|
|
In more than 100 years RONCUZZI® has gained and consolidated a vast experience in the area of bulk solids handling. In this period RONCUZZI® has designed and supplied numerous plants and equipment of different types and capacities and for a variety of materials. Today the Company's unique know-how represents the foundation of a comprehensive Bucket Elevator range that is able to meet each and every user's requirements in terms of problem solution and reliability in time.
|
|
|
|
|
|
Mechanical Conveyors - Sanitary Bucket Elevator
All front panels can be quickly opened ...and the belt is easily removed for thorough and total cleaning. For even faster product changes, keep a spare belt/bucket assembly handy.
For food processing, chemical and other processes requiring sanitation, the SC Series elevators are offered in stainless, as well as the standard carbon steel. A heavy support column and a base plate make this a rigid, self-supporting elevator. Capacities range up to 1,000 ft3/h, with discharge heights designed to meet your specifications.
Chemicals/Powders
Amorphous Silica, Stucco, Microfine (Quartz & Feldspar), Micronite, Aluminum Oxide
Edible Beans
Baby Lima Beans, Large Lima Beans, Black Beans , Navy Beans, Red Kidney Beans, Chick Peas, Pinto Beans ,
Whole Green Peas, Yellow Split Peas, Lentils
Food
Popcorn, Peanuts, White Rice, White Corn Meal, Brown Rice, Oat Flour, Ground Coffee, Roasted Coffee,
Onion Flakes, Sugar, Powdered Milk, Hot Coca Mix
Nuts
Peanuts in a Shell, Shelled Peanuts, Almonds, Pistachio, Macadamia, Walnuts
Seed
Corn, Grass Seed, Soy Beans, Poppy Seed, Cotton Seed, Alfalfa, Med. Red Clover
Spices
Paprika, Oregano, Coriander, Sweet Clover, Dill Seed Dill Weed
|
|
Cup elevator
For the handling of hot or cold pellets without breakage
INDUSTRIAL materials of crushing, mixes, handling, storage, proportioning, sifting and bagging
|
|
InterSystems Bucket Elevators are built for extended life and gentle material handling.
Our bucket elevators also include:
Pillow block bearings
Bearing jack bolts for shaft alignment
"No tool" access hinged doors
Long, contoured head
Gravity take-up and self-cleaning boot
|
|
VARLIK bucket elevators (conveyors) are very good for heavy conditions. Bucket conveyors (conveyors) are able to deliver and start-up (in Turkey or worldwide) very shortly at your plant.
Bucket elevators are very ordinary but very important machines which is continuously running in your lines. If you use VARLIK elevators, it will be a forgotten machine that it was improved year by year by VARLIK and it is assembled by 20 years VARLIK experts. We are proud of proving these with our references.
Production range:
Bucket elevators, belt type
Bucket elevators, chain type
|
|
The Ryson Bucket Elevators are designed for heavy duty operations and long life. They can be delivered in painted carbon steel, stainless steel or washdown versions. Elevators with multiple outlets have selective bucket tipping capabilities. This is accomplished by an air actuated tipping ramp. The last tipping ramp is always in a fixed position to assure that all buckets are emptied. The chain is a 2" roller chain with hollow pin shaft and 1 1/8" diameter rollers. The rolling surface is made of polyurethane assuring smooth and quiet operation. The buckets are made of a food grade reinforced polycarbonate, molded in one piece and a can handle temperatures from -5 to 215 degrees Fahrenheit.
Anti-static and stainless steel buckets are optional. The bucket elevators allow for controlled feeds at one or more locations and can easily interface with various types of feeding devices.
|
|
Bucket Elevators
All of our bucket elevators are constructed for heavy-duty, foundry grade service. Every unit is engineered to fit each application. Standard casing sizes are also available. The tail pulley is easily accessible from either side of the elevator. Split hoods provide complete access to the head pulley and shaft. Each unit includes dust collection ports located as collection requirements and space limitations allow.
Vulcan Engineering Co. can supply a heavy-duty bucket elevator for your specific needs.
|
|
|
|
|
|
Bucket elevators are the solution for the transportation of bulk goods where vertical transport is required. Bucket elevators combine horizontal and vertical conveying in one installation. The product is fed into the buckets of the elevator. The buckets ensure that during vertical transport no damage, missing or change of product compositions is possible.
Drive section of bucket elevator shaving outlet diverterd in -Y- piece, loading different silos.
Bucket elevator for the transport of bird seeds from big bag unloading stations to sieve installation. Type 600 - 60 m3/Hr
Apollo has over 40 years of experience in bucket elevators. The Apollo bucket elevator combines horizontal and vertical transport in one installation.
This together with the possibilities of several inlets and outlets, makes our installation an efficient part of your production process.
The main features for a bucket elevator can be summarised as follows:
No damage or change of product
Modular design
One drive
Overlapping buckets
Easy to install
Low maintenance
Additional options
|
|
Strong points of the TOP SPIN STAKE:
• Continuous elevator
• Gives rhythm very fast
• Capotage of safety
• Robust construction
• Continuous chute
• minimum Maintenance
• Reliability Automatic operation
• Continuous operation
• Maintainability practises
• Performances without equivalences
• Protection personnel
• Very competitive price Speed installation
• Resistances in industrial circle
• Return on fast investment
• Robustness
• Safety personnel
• Solidity
|
|
Upward and downward elevators are used for level changes, and make loading and unloading easier.
The elevator has a hoist.
|
|
Handling device allowing the vertical transfer of loads between two levels. The loading of the totes in the device is synchronously made, when soft carriages take place. The unloading is made when those carriages wrap themselves up. The generated relative movement allows also the loads moving on a receipt conveyor. The loadings and unloadings can be made either on the same side (C version) or on two opposite sides (Z version). This device is also available in stainless steel version for clean environments like food industries.
|
|
|
The elevators (also called lifts) make it possible for the loads to change level. The construction of the elevator is adapted to the transported loads: elevators with cables; elevators with belts; elevators with chains Several parameters are established according to the project: speed of rise (in m/min), dimensions of the nacelle,…
|
|
DB Lift Provides Fast, Safe Lifting Of Small Loads And Packages. Features Counterweighted Lifting Mechanism For Smooth, Quiet Operation.
Ideal for high-speed applications that require light-duty lifting of boxes, cartons, packages, totes, containers or cases.
Provides throughput of four loads per minute (based on 100 lb. load, 10' vertical rise, 90 to 120 fpm horizontal conveying speed.)
Counterweighted lifting mechanism requires minimal maintenance. Lifting belt never needs lubricating.
Perfect for use in an automated system.
Saves space and handles loads that are often transported on an inclined conveyor.
Completely self-contained, self-supporting and economical. Moves loads to mezzanines, between floors or between conveyor levels.
Lifts up to 100 lb. live loads with carriage sizes up to 3' x 4'. Vertical rise to 50'. Travel speeds from 60 fpm to 400 fpm.
Counterweighted design minimizes horsepower requirements, saves energy costs.
|
|
Light-duty elevators
Lifting trucks, lifts and clocked elevators fall under the category elevators.
The execution of these conveyors is subject to claims of a safe equalisation of the vertical level difference or to providing a buffer for smallest dimensions.
Also available in stainless steel.
|
|
|
|
Other ground conveyors
