|
|
|
|
|
|
- VENUS -
The quick fixed bridge machining centre; very accurate and sturdy, it proves to be the ideal solution for the machining of small 3-5 axis batches in a pendular cycle. Designed for meeting any flexibility request, it offers wide application possibilities considering it compact size.
- Speed and accuracy -
The fixed bridge single-piece frame, the motion mechanisms appropriately sized for heavy-duty working loads, the high-performance digital axis and the electrospindle power contribute to guaranteeing high machining speeds in combination with positioning accuracy and finishing quality.
Venus can be configured with a wide range of operating units. The RX4 operating unit emphasises its work field width and the machining speeds. It can also be configured alternately with the 5-axis PX5 unit or the 3-4-axis TX3 operating unit.
The work table is available in the steel version with universal T-shaped guides and standard vacuum system, or with special universal clamping modules, for an immediate work table setting.
- Safety and protection -
The protection cabin and the extraction stroke of the work tables, which completely protrude from the cabin, make the workpiece load/unload operations very safe and isolate the work table (dust and chip ejection) for the total benefit of the surrounding environment.
|
|
FLEXDOOR 7000 machining centre make it possible to machine large daily amounts, even if manufacturing batches are reduced and customised. The FLEXDOOR 7000 enables machining or hardware installing on frame stiles, into a common machining line or two specialised lines "locks" and "hinges" The FLEXDOOR 7000 digital control enables high flexibility to be reached while maintaining a very high productivity. The machines also allow pins, hinges or keepers to be installed.
|
|
|
The new ACME Series Moulder FULLPOWER machinery give you to own all the economy and efficiency of excellent performance at a reasonable price. This Moulder has an exclusive differential all cast iron base construction. For extraordinary precision speed and reliability. This all new ACME Series standard of Fullpower Machinery 4-Side Moulder is your best choice.
|
|
Item No. : ACS-80-3PS & ACS-80-4PS & ACS-100-3PCS & ACS-100-4PS
Automatic Copy Shaping Machine with Sanding Attachment
|
|
|
Automatic cut off saw for defecting and optimized cutting. Feeding by 11 corrugated rollers with a maximum speed of 240 m/min and a tolerance on cut length of +/- 1 mm. Pressure rollers, sitting on pneumatic cylinders, allow the feeding of boards with rough surface and sensible variations in thickness. The 2 meters distance between the camera and the blade ensures a perfect optimisation keeping a compact structure. The control, with operating system Windows XP, is complete and user friendly. On request the cutting line can be completed with a width scanner, a second camera for handling up to 5 grades (3 grades with the only standard camera) an ink-jet printer and with various length sorting systems.
|
|
|
|
|
|
The TecnoMax edgebander with glue pot
The ME 15 and ME 20 automatic edge banders are entirely designed and built by MiniMax backed by the experience and expertise of the SCM Group.
Compact, precise and versatile. Rapid retooling when changing over from one edge band thickness to another. These were the main design specifications around which the machine was developed.
The ME15 and ME20 will apply a variety of edge bands ranging in thickness from 0.4 mm to 2.0 mm. The machine has an automatic loader for edge rolls and a pneumatic end cutter unit which guarantees a clean, precision cut on the leading and trailing edges of the panel.
Main optionals:
Edge thicknessing kit up to 1.5 - 2 mm
* angle fence with numeric indicator
* roller unit on worktable
* numeric indicator for cutter setting on trimmer
* cutters with shaped profile (2 mm radius)
* bearings for trimmer
Coil holder plate 730mm
Single-phase motors 50/60 Hz
The trimming unit has its own 0.37 kW motor and trims the surplus edge banding using two, widia-tipped cutters with a 75 mm diameter. Trimming precision is guaranteed by two, chromed copiers which are bearing mounted to ensure smooth panel feed.
A top-mounted 0.18 kW feeder ensures uniform, powerful panel feed through the machine.
The machine is reasonably priced and therefore well within the reach of woodworking workshops and small carpentry businesses and what is, potentially, a wide market.
|
|
|
|
|
|
ALA 23, AUTOMATIC EDGEBANDING MACHINE FOR SMALL TO MEDIUM INDUSTRIES
ALA 23 is the new edge banding machine offered by CASADEI, simple, flexible and reliable, available in different compositions, suitable for small to medium industries searching for high quality finishing and good production output.
ALA 23 can process edges within a thickness range from 0,4 to 8 mm and a working height from 8 to 55 mm. Furthermore it is provided with: a glue pot unit with a capacity of 1,5 kg, a quick heating system and an automatic internal device which reduces the glue temperature in case the machine is not used for a certain period of time; a cutter with an efficient edge saving device, which allows for the optimisation of the waste; and a pressing unit with pneumatic pressure regulation and with 3 rollers, the first one of which is powered with a clutch system, meanwhile the second and the third have opposed tapering for a perfect adhesion of the edge.
ALA 23 also has an end cutting unit, tilting up to 15°, which can take up two positions (one for straight cuts at 90° and one for chamfered cuts of the excess edge at the front and back of the panel) and a trimming unit, tilting from 0 to 10°, which removes the excess edge at the top and bottom end of the panel.
Some versions are equipped with an infeed pre-milling unit, with an automatic timing intervention device to avoid panel chipping, and with a rounding unit which allows the machining of the corners even of soft/post-formed panels with its agile and precise movements and in one pass.
|
|
|
The Biesse edgebanding centres in the Rover C series mean that it is possible to complete processing of a shaped and edgebanded panel in a single machine. The ease and speed with which the operating sections are tooled up, rapid changeover of the boring head bits and the automatic working area reconfiguration system make Rover C Edge processing centres suitable to machine small batches.
|
|
Heavy duty two heads industrial wide belt sander
Technical Data:
1 Working Width (mm) 50~1300
2 Working Thickness (mm) 3~70
3 Working Length (mm) ¡Ý500
4 Working Precision (mm) ¡À0.1
5 Motor of Abrasive Belt (KW) 30+22
6 Speed of Abrasive Belt (m/s) 18.5¡Á22
7 Abrasive Belt size L¡ÁD (mm) 2265¡Á1330
8 Working Pressure (MPa) 0.4~0.7
9 Compressed Air Consumption (m3/min) 0.6
10 Feeding Speed (stepless speed variation) m/min 4~13
11 Motor for Auto Feeding System (KW) 3
12 Motor for Work-table Elevator (KW) 0.37
|
|
|
|
|
|
It is a well-known fact that a wooden surface becomes rough after sealing.
The reason for this is that fine fibres are created by ordinary wood sanding
procedures, for instance using a widebelt sander. Because of the pressure of the abrasive material against the surface, the wood's fibres are severed,
resulting in microscopic fibres creating a fuzzy surface. During the following sealing process, tension is generated in the fibres causing them to rise, and thereby giving the surface a rough feel. In other words we need to look at the fibres!
The presence of these fibres must be minimised or efficiently removed before or after the sealing process. The solution is to use the FLADDER® sanding system - an innovative sanding method based on sanding principles which are fundamentally different from those of traditional sanding methods. Rather than sanding with a constant pressure against the surface, the FLADDER® sanding system is based on a principle by which the sanding aggression is created by the sanding tool's rotating speed.
|
|
CTR 650 M
Offering value for money, Against CTR 650 and CTR 650 S, there is manual feed into the cut and return. Compared to the competition in the category of manual band saws, it is the only one that has motorised blade height setting from the central control panel. The setting is single speed with an option of electronic measuring with the LG 100. All this significantly accelerates, facilitates, and makes more accurate the height setting of the saw blade.
CTR 650 GX
This version is fitted with a professional four-stroke engine HONDA GX 620. The high performance of the engine 14.7 kW (20 HP) guarantees high machine performance.
The engine has electronic ignition and manual starting.
Manual feed into the cut and back as with CTR 650 M. Also the simple height setting of the arm using a hand crank is manual.
|
|
three heads wide belt sander for wood,calibrating+calibrating+polishing
Technical Data:
1 Working Width (mm) 50~1300
2 Working Thickness (mm) 3~100
3 Working Length (mm) ¡Ý500
4 Working Precision (mm) ¡À0.08
5 Motor of Abrasive Belt (KW) 22+22+15
6 Speed of Abrasive Belt (m/s) 20¡¢20¡¢12
7 Abrasive Belt size L¡ÁD (mm) 2265¡Á1300
8 Working Pressure (MPa) 0.4~0.7
9 Compressed Air Consumption (m3/min) 0.9
10 Feeding Speed (m/min) 5~30
11 Motor for Auto-feeding System (KW) 4
|
|
six lines multi boring machine
Technical Parameter MBZ266
Max drill diameter 35mm
Max working depth 60mm
Length between vertical spindle heads 130-3250mm
Numbers of spindle 21*2+11*8lines
Spindle running speed 2840r/min
Motor power 1.5kw*6
Air pressure 6-8kg/cm2
Overall size 4600*2500*1600mm
|
|
Machine frame in welded construction, in one only piece, answers with safety and without vibrations to the most difficult conditions of work.
The overdimensioned spindle supported over ball-bearings, being one swinging and mounted in a side door for the easy replacement of saws, is driven by V-belts.
The feed is assured by five rollers of great diameter all motorized and supported over stanch bearing. The feed variation is continuous and assured by the hydraulic system.
The adjustment in width of the saws and the adjustment in height of upper rollers to fit the exigencies of each operation is easily and quickly done through a handle placed near the operator. These movements are also achieved by the hydraulic system of the machine.
The machine is supplied with an idle rollers infeed table of 2m as well as 2 lasers.
Options:
· Idle rollers outfeed table of 2m of length.
· Automatic outfeed slabs separator model TSCA.
· Long sleeve with spacers.
|
|
Maschines for working about veneer, solidwood, radius, chamfer and more.
Many different types about from the simple to the automatical machine
|
|
Edge Banding Machine,Edge bander
EBM508C EBM509 EBM509RA
Panel length 120mm 120mm 120mm
panel width 110mm 110mm 110mm
Tpanel thickness 10-55mm 10-55mm 10-55mm
Edge thickness 0.4-8mm 0.4-8mm 0.4-8mm
Speed 13m/min 13m/min 13m/min
Power 6.35kw 7.3kw 7.3kw
Pneumatic power 0.55Mpa 0.55Mpa 0.55Mpa
Machine size(LXWXH) 3930X1300X1470mm 4350X1300X1470mm 4750X1300X1530mm
Weight 1200kg 1500kg 1750kg
Edge Banding Machine,Edge bander
|
|
|
|
|
|
CTR 650
Small but very professional band mill. The design of the main component units, such as guide wheels including their bearing system, design of the saw band arm, the drive system, the feed system, etc. are identical with the type series CTR 800 or even the high performance CTR 950 Hydraulik.
With this type, the central control panel is located on a moving bridge of the saw frame. This allows for a closer contact of the operator with the material during cutting.
CTR 650S
Different from the CTR 650, the central control panel is located on a fixed pillar attached to the machine bed. This allows for comfortable machine operation from one control point.
CTR 800
Vertical and horizontal band saw movement, with variable speed, controlled by a frequency converter. Electrically controlled vertical feed for
board thickness setting enables switching to fast feed (for bigger distances) and slow feed (for exact setting of the required board thickness).
If the required board thickness is selected on the LG-Automat (accessories), the band saw moves to the set value by fast feed and
automatically slows before 'overrun' and stops at the pre-set position with the accuracy of 0,1 mm.
- Electrically controlled horizontal band saw movement; forward and reverse feeds with infinitely variable speed are controlled by a frequency converter. Turning a single button enables an infinitely variable speed change during cut, depending on the timber cut. Feed speed continuously displayed on a digital display.
CTR 950 S
The same structure as with the CTR 950 Hydraulik, but without the hydraulic equipment. Clamping and handling of the cut material is manual. This solution allows for purchasing of a value for money professional machine for cutting of large diameter trunks.
Within the scope of the unique modular system of the CTR type series, even this machine is equipped with all clamping points for additional installation of complete hydraulic accessories.
|
|
Wide Belt Sander,Wood Sanding Machine,Heavy duty double sides four heads wide belt sander
MMH5813DR-RP
Technical Data
1 Working Width (mm) 80~1300
2 Working Thickness (mm) 0~150
3 Working Length (mm) ≥100
4 Working Precision (mm) ±0.1
5 Motor of Abrasive Belt (kw) 90×2+75×2
6 Speed of Abrasive Belt (m/s) 30
7 1st Abrasive Belt size: L×D(mm) 2800×1360
8 2nd Abrasive Belt size: L×D (mm) 3080×1360
9 Motor for Body-Elevator System (kw) 3
10 Feeding Speed (frequency conversion) m/min 6~35
11 Motor for Auto-feeding System (kw) 18.5
12 Working Pressure (Mpa) 0.6~0.8
13 Compressed Air Consumption (m3/min) 2.5
We product Wide Belt Sander,Wood Sanding Machine with working width from 600mm to 2000mm
www.bonasun.com
|
|
Heavy duty wide belt sander,double sides,four heads
Technical Data
1 Working Width (mm) 80~1300
2 Working Thickness (mm) 0~150
3 Working Length (mm) ¡Ý860
4 Working Precision (mm) ¡À0.1
5 Motor of Abrasive Belt (kw) 75¡Á2+55¡Á2
6 Speed of Abrasive Belt (m/s) 25
7 1st Abrasive Belt size: L¡ÁD(mm) 2560¡Á1360
8 2nd Abrasive Belt size: L¡ÁD (mm) 2800¡Á1360
9 Motor For Upper Body Elevator (kw) 2.2
10 Feeding Speed (stepless speed variation) m/min 6~35
11 Motor for Auto-feeding System (kw) 15
12 Working Pressure (Mpa) 0.5~0.8
13 Compressed Air Consumption(m3/min) 2
|
|
|
|
|
|
WOODY is the home log splitter perfect for the family! Compact design, powerful, and easy to operate. The best solution for whoever wants to split the wood at home, whenever, wherever!
With 4 tons of thrust, this log splitter can split even the most sturdy wood logs in a few minutes (even logs of over 25 cm of diameter). The special guides keep the log always in the centre of the wedge, while the precision of the split allows to prepare thin logs, suitable to light the fire. The log capacities of WOODY can be 37 or 52 centimeters, depending on the model chosen (WOODY 40 or WOODY 50).
WOODY is safe as it's been projected for being operated through the "two hand ZHB" system which obliges the user to operate the machine with both the hands at the same time, one on the lever and the other one on the switch). This way the risks to get hurt while working are zero!
The use of the computer allowed to assemble WOODY with a small number of parts reducing the maintenance of this machine to the minimum.
Thanks to its compact design, its light weight (only 35Kg for the WOODY 40 version), and the wheels, let , WOODY can be moved easily and put in a corner or in the trunk of any car!
|
|
300 mm universal combined machine
Following the success of the C26 genius and in response to market demands, MiniMax presents the C30 genius, a combined universal machine, with tables made completely of cast iron, and superior features. The 1200 mm long planer tables and the 200 mm improved thicknessing height allow more heavy-duty machining. Therefore, the C30 genius is set to repeat the commercial success of the C26 genius, backing it up, and completing its range, as a new small and economical universal combined machine. An ideal first purchase, it is practical and efficient and even with its compact footprint can still guarantee performances typical of a professional machine.
Main options:
• Aluminium mortiser
• Self-centering Wescott type chuck
• Squaring frame
• Wheels for machine movement
• Tenoning table and protection hood
• Spindle moulder protection for shaping operation
• "Tersa" cutterblock with 3 knives
• 3 single-phase motors 1,5kW 2Hp 50Hz (1,8kW 2,6Hp 60Hz)
|
|
|
|
|
|
Universal combined machine 410 mm
Elite Serie: the Combined Machines for the professional woodworker. Technology, design, innovation and quality: 100% made in Italy. The Universal Combined Machines of the “Elite” Serie represent the TecnoMax solution for the handcrafts who are looking for a compact machine without renouncing a top quality end product. The rapid machining changeover, the possibility to compose the machine according to the one’s requirement, and the same performance of the single-machining models are the main qualities which characterize this new range.
The new saw unit is made of a strong cast-iron structure. It is tightly fixed under the table and can be tilted by means of two side supports (trunnions): these solutions grant sturdiness, rigidity and a perfect cutting result. Furthermore, on request, the unit can be equipped with scoring unit for an optimal cutting even on upgraded panels. The sliding table is made from extruded anodised aluminium with a closed, honeycomb structure. The carriage runs on an exclusive slideway system consisting of guides made from calibrated and hardened F550SX steel. The spindle moulder unit is designed to provide the maximum stability and rigidity under all working conditions. Top performance features include: a large-size, cast-iron moulder spindle; a large distance (230 mm) between the two bearings on the moulder spindle; the possibility to mount tools at a minimum distance (5 mm) from the first bearing. The 4 standard speeds (3500, 6000, 8000, 10.000 rpm) are ideal for all types of machining operation, from moulding to routing against the grain.
|
|
|
|
|
|
CTR 800 Hydraulic
Design wise, it is based on the popular model CTR 800 S that is housed on a raised travel frame that allows for installation of complete hydraulic accessories.
Handling of the timber using the hydraulic accessories significantly increases machine productivity. At the same time, it saves labour costs, because the machine control and handling even of very heavy timber can be performed by one employee.
The extension sections with a cutting length of 3 metres allow for installation of hydraulic accessories according to your requirements.
Machine control is identical to type CTR 800 S. At the central control panel, there is also the control of the complete hydraulic accessories.
CTR 950 & CTR 1300 Hydraulic
The very robust machine structure allows for installation of powerful hydraulic accessories that easily handles even very heavy timber.
Two way guidance of the bridge frame on the travel section in combination with a strong motor allows for smooth and quick pulling of even heavy cut pieces while using the sawn timber material feeder.
The machine is equipped with rapid travel of the bridge frame with automatic deceleration at end positions.
The extension sections with cutting lengths of 2, 4, and 6 metres allow for installation of hydraulic accessories according to your requirements.
The basic travel section and the extension sections are equipped with many clamping points for installation of hydraulic accessories, which allows for large flexibility during the design for the customers exact requirements.
|
|
Veneer slicer model VSH1127F/1
Max.cutting sizes (mm) 2700×650×500
Cutting veneer thickness (mm) 0.14-2.2
Frequency(t/mm) 13-33
Main motor power (kw) 22kw 132-1320rpm
Lift motor power (kw) 2.2kw 1400rpm
Clamping motor power (kw) 2.2kw 1400rpm
Overall dimensions (mm) 7785×3870×2440
Weight(kg) 16600
Veneer slicer
|
|
This machine can grant a huge volume of work in a few time without any stress of the user. It is equipped with motors and oleodinamic groups of great power which let the HS 50 deliver 30 tons of thrust in total safety without any compromise!
The log splitter HS 50 by BELL is trailerable and have many important accessories and feature to quicken the work even on heavy and strong wood logs.
|
|
HYDRAULIC LOG SPLITTERS FH 7023
maximum splitting power 7tons
1 fixed table and 2 height-ajustable tables
Splitting length 0.56m, 0.8m and 1.15m
"Two-hands" synchronization to hold the wood
|
|
The edge sanding machine type LZK SD has been developed according to long experiences and to the newest knowledge’s in a modern, unit as-
sembly system for the handicraft and interior furnishing workshops.
This machine is used for solid as well as for veneer edges and can be easy integrated in work process as a single machine as well as in production lines.
The machine can be build up exact to the customer use for many different products. So the user get a fast and economic work process.
-Flexible modular construction system
-Possibility to work with a groove cutting unit in trough feed system
-Build up with different work units exact to the customer need
-Many different work processes in one work step
-Smooth running because of very strong construction
-Easy to adjust and handle
|
|
The new F 45 is a gem of modern industrial design. Its sleek external profile reflects real inner quality and a new dimension in user friendliness: the intelligent, absolutely precise electronic controls, which are now an integral part of every Altendorf. On top of that, the F 45 has a large LCD screen on which all settings are displayed.
Coming complete with motorised rise/fall and tilt adjustment of the saw blade, clear on-screen operator guidance and a USB interface for fast data transfer, even the basic specification of the F 45 sets the standard. The three F 45 option packages offer even more in the way of user-friendly options with features such as an eye-level control panel, VARIO drive and motorised rip fence. The new generation of Altendorf F 45: more powerful, more dynamic, more user-friendly.
|
|
|
|
|
|
The new F 45 ELMO has been fundamentally redesigned. The result is a high-tech modular system, which handles even the most challenging technical requirements of the saw user. The low-reflection 12” colour LCD display with touch screen functionality is new. This display method makes for straightforward operation through a self-explanatory, graphics-oriented approach to control. The display shows 90% of the applications, thus cutting down on time spent navigating. The USB port for data
exchange and backup is also new. A further innovation is the crosscut-mitre fence on the F 45 ELMO IV, which can be adjusted to any angle between 0 and 47° and has integral length compensation.
There are two versions of the F 45 ELMO with either three or four motorised axes (F 45 ELMO III and F 45 ELMO IV respectively). Each of these machines can be equipped with optional extras to meet your own individual requirements.
In 2007 the jury of the International Forum Design presented its iF gold award for outstanding product design to the F 45 ELMO.
|
|
The WA 8: Altendorf quality for selected markets.
On a budget but still want high quality? Then the WA 8 from Altendorf is the ideal machine for you. This full-blooded sliding table saw delivers Altendorf quality at an affordable price, mastering effortlessly all the cuts that are the daily fare of modern woodworking shops. You get a professionally equipped sliding table saw at a price that makes it attractive both as an entry-level and as a second machine.
|
|
|
|
Woodworking machines
