|
|
Dynafile® Abrasive Belt Machine
- Grind, deburr, blend and polish
- Work on metal, plastic, fibreglass, composites, rubber, glass and stone
- Work in areas as small as 3/8" diametre
- Also existing in a Versatility Kit
|
|
Dynfile® II Abrasive Belt Machine
- Grind, deburr, blend and polish
- Work on metal, plastic, fiberglass, composites, rubber, glass and stone
- Lightweight, 7° offset design. Grinding head pivots 360°
- Grind off contact wheel or platen pad. Finish & polish using slack of belt
- Also available in a Versatility Kit
|
|
Highly versatile compact angle grinder with M 14 spindle for grinding and sanding.
For all grinding, sanding, cutting and brushing applications.
HIGH-POWER-MOTOR with enormous torque for high grinding capacity.
Self-start lock prevents uncontrolled reactivation following power supply interruption.
Gentle start for recoil-free and safe starting.
Spindle brake for quick tool changes.
|
|
Model: WS 24-230
• Powerful 2400 watt motor
• Epoxy-coated fi eld windings and armature - prevents accumulation of abrasive dust, increasing tool life
• High quality sealed bearings provide superior protection
• New “snap-in” safety guard for keyless adjustment
• Convenient three-fi nger switch with soft start
|
|
1400 WSE 125
Product features
- Full wave electronics for consistent power and speed
- Soft start-up and start current limitation
- Aluminium die-cast gear casing
- Spindle lock for quick grinding disk change
- Electronic overload protection prevents the motor from overheating
- Carbon cut-off brushes for motor protection
- Restart protection to prevent tool starting automatically following a power failure
- Up to 300º protective cover adjustment
- Gear with special spiral toothing and low-vibration gearbox mount for quiet running
- Easy-to-change carbon brushes
- Protective cover can be pivoted without a tool
- Ergonomic, two-component soft handle for fatigue-free, low-vibration work
- 4 m rubber mains cable with patented quick-lock system
- 4 m and 6 m cables can be delivered as accessories
|
|
|
|
|
|
Features
Die Cast Construction – for increased durability
Spindle Lock – allows for quick and easy accessory changes
3 Position Side Handle – for added convenience
Compact Gear Case – for less weight and increased versatility
Powerful 13 Amp Motor – features precision cut gears and sealed bearings for increased durability
Multi-Position Twist Handle – can be locked in one of three positions
Overmold Primary Grip – reduces vibration and provides a more sure grip
Two Finger Trigger Switch – for comfort, ease of operation, and reduced user fatigue
Auto-Stop Brushes – automatically shut down once the end of their usable life is reached protecting the tool from damage
Tool-Free Wheel Guard Adjustment – makes changing guard positions fast
Lighted Plug – to easily identify live tools
Specifications
Input: 120 V AC, 13 Amps
No Load Speed: 8,000 r/min. (RPM)
Spindle Thread Size: 5/8 in-11U
Tool Weight: 8.0 lbs.
Cord Length: 12 ft.
Includes
R1020 Angle grinder, side handle, wheel guard, grinding wheel, flange, clamp nut, spanner wrench, and operator’s manual
|
|
VIBRATION BELOW 5 m/s²
People who use angle grinders every day are only too familiar with equipment vibration and in many aspects aware of its effect on health. EU directive 2002/44/EC, June 25, 2002, specifi cally addresses workers exposure to hand-arm vibration. It sets exposure limits to help protect workers and aids employers to take measures to help reduce workers exposure. In addition to the Metabo VibraTech system Metabo now uses autobalancing technology to help reduce the level of vibration users can be exposed to. From compact models up to 150 mm, we now have the widest range of lowvibration angle grinders on the market
|
|
180mm(7") Disc Grinder (2,400W/2,600W)
- Vibration-absorbing main Handle and side Handle:
- Low gear sound
- Powerful 2,400W/2,600W Hitachi Motor
- Excellent overload durability:
- Stator coil cooling technology for class-top overload durability
- Prolonged service life of the Carbon Brush
- Dust- proof ball bearing thanks to the labyrinth construction
- Soft grip handle
- Construction to protect grease leakage
- wheel guard angle-adjustable without using a tool
- Spindle Lock and 3-position side handle design
- Soft Start Control for G 18UAY
|
|
9553NB
Depressed Center Wheel, Lock Nut Wrench, Grip
FEATURES
- Small circumference barrel grip for easy handling.
- Labyrinth construction protects all ball bearings from dust and debris.
- Armature coated with protective zigzag varnish and Field coated with powder varnish protect motor from dust and wire breakage, ensuring durability enough for masonry cutting.
|
|
Model: HBS 1000 E
• Powerful 1010 watt motor
• Electronic speed for control and optimum results
• Clamping lever for easy, tool free changing of sanding belt
• Externally accessible brushes for easy replacement
• Control wheel for precise adjustment of sanding belt
• Compact design, ideal for sanding close to edges
• Die-cast construction for high strength and durability
• Dust extraction, with dust bag or absorption system
|
|
2FSM 2" Sander Multi-position vertical or horizontal
2" x 48" belt, Vertical or Horizontal Position.
1/2 HP motor, 3450 RPM, direct drive, 5" contact wheel
Tilt work table, removeable platen
Full hinged OSHA guard for quick belt change.
Pre-set belt tension, one knob belt tracking.
4500 SFPM belt speed, WT. 48 lbs.
Model: 2FSM
Other products available:
|
|
S6MS, 6" belt sander
Industry standard. 3 HP !! Real workhorse !! Every shop needs one !! Also available in 5 HP and in 6" x 60" belt!
6" x 48" belt, variable positons, direct drive, 1 lever quick belt release !!!
Cast iron frame, Full OSHA safety guard, Heavy duty steel stand.
3 HP motor 3450 RPM, 1 phase or 3 phase, manual switch, 3500 SFPM
Reversible platen 6 1/2" x 14"
Cast iron work table 6" x 10" with 1/2" x 1/8" slot
Option: JIC controls
Model: S6 sander head only, less motor
Model: S6M-1 3hp, 1 phase, 220, LESS stand.
Model: S6M-3 sander, 3 hp, 3 phase, LESS stand
Model: S6MS-1 , 3 hp, 1 phase, 220 volt, w/Stand ( 110 volts @34amps)Model: S6MS-3, 3 hp, 3 phase, 220/440 volt, w/Stand
Model: S6MS-5 5 HP, 3 PH other features same as above.
Model: S660MS 6" x 60", 3 hp, other features same as above.
Other products available:
|
|
Type Surface grinder
Grinding wheel dimensions Lap.200*40*20 / Meule 200*25*20
Type of wheel 36 / 60
Power (W) -
1 ph motor 230 V
3 ph motor 400V 1100
Speed (rd/min) 3000
Dimensions 680*430*360
Weight (kg) 27
|
|
The circular vibrators can be used for the surface treatment of a multitude of parts and within the framework of very different processes.
Their range of applications goes from aggressive fettling, with the shelf to the polish-mirror of delicate parts, of the émerisage of outline until scouring before galvanization.
Various solutions exist (solutions uninterrupted, etc...)
- Circular vibrators of the range CD
- Vibrators of range CB
- Circular vibrators of the range CM
|
|
Trowal circular vibrators are universally used for practically any finishing application.
They can be used for cutting-back, fine finishing, polishing and generating specific finishes before pre-plating. They are suitable either as economic "stand-alone" machines or for integration into automated manufacturing systems.
CD CIRCULAR VIBRATOR
Robust and economical
Trowal circular vibrators of the model range CD have an integrated screening system consisting of manually or pneumatically operated separation flap and a built-in separation screen.
Their main characteristics are their robust design and their competitive price.
|
|
S612 & S612V Combination Sander With Vacuum !! 3 HP !!! Made in USA!!! 6" x 48" belt, 12" Disc, Vacuum Base
Available with OR without dust collector. 3HP 1PH 220 OR 3HP 3PH 220/440 volt. ( Specify voltage) Manual switch with overload protection.
Built in 100 CFM dust colletor base with cartridge filter.
Quick change belt, pre-tensioned one lever belt change...FAST !!
Models:
- S612-1 No vacuum, 1 phase/220 volt
- S612-3 No vacuum, 3 phase 220 or 440 volt
- S612V-1 Vacuum base, 1 phase/220 volt
- S612V-3 Vacuum base, 3 phase 220 /440 volt
Dimensions: L12" x W14" x H60", Weight: 500 lbs.
Specifications:
Belt Sander
Work Table- Cast iron 6" x 10" with 1/2" x 1/8" slot
Platen- Steel 6-1/2" x 14"
Belt- 6" x 48" - 2800 SFPM
Disc Sander
Work table- Cast Iron 8" x 14"
Disc- 12" aluminum disc, 5/8" arbor Speed- 2500 RPM
Other products available:
|
|
12,000 – 18,000 RPM
0.5 – 1.1 hp (0.4 – 0.8 kW)
■ Composite and steel housing
■ Front, Side & Rear Exhaust
|
|
- 20,000 RPM cut-off tool uses 3" (76 mm) diamond cut-off wheels with 3/8" (10 mm) mandrel
- An attached, non-marring plastic flange protects surfaces during cutting
- .7 hp motor delivers cutting speed power
- Tool is equipped with 94300 Dynaswivel®
- A 3" (76 mm ) diamond wheel with integrated mandrel is required (sold separately)
- Unique shroud and flange design add to existing cut-off family
- Ideal for trimming fibreglass/composite parts
|
|
G Series grinders are available in a choice of 0.3kW, 0.6kW and 1.0kW motors offering the right performance for every application. Configurations available include straight, extended straight and angle with a variety of attachments.
The G1 series (0.3kW) is ideal for light material removal, cleaning rough castings, deburring parts, cleaning up welds and other finishing tasks.
The G2 (0.6kW) series is perfect for big jobs having a high torque motor with high stall.
The G3 (1.0kW) series has a superior power to weight ratio with one of the highest stall torques on the market today. With its contamination free speed controller and one nut access for servicing it is the tool of choice for maximising material removal rates.
The G3A120PP95AV angle wheel grinder (125mm) has one of the lowest vibration levels available today with autobalancer and unique anti-vibration side handle fitted as standard.
|
|
DS10 10" disc sander
Heavy-duty, all steel
Tilt table, 45 degrees down - 15 degrees up
Optional: MG10 mitre gauge
10" aluminum disc
5/8" arbor
6" x 11" table
1/2 HP (110/220V), 1 PH TEFC motor
48 lbs.
Model: DS10
Other products available:
|
|
- Disc Sander and Random Orbital Sander Combination
- 12,000 RPM Dynalocke® is truly "two tools in one", easily changing from a rotary Disc Sander to Random Orbital Sander with the flip of a switch
- Includes low profile, premium urethane sanding pad
- Very lightweight with ultra-smooth sanding performance
- Ideal for paint stripping and blending
|
|
150mm(6") Disc Sander
- Hitachi powerful motor (900 W max. output) and 2.0kg lightweight
- Completely novel design and comfortable grip handle covered with elastomer and rubber side handle
- Thanks to the adoption of the bearing bushing, the ball bearing chamber of the commutator side is durable
equipped with spindle lock for easy tool replacement
- Soft air cover which can easily attached and detached for comfortable operation
- Wear-resistance tail cover
- Double insulation
|
|
Model: BHO 18 Li
• Additional front handle with soft-grip for convenient two hand working
• Large dust bag for a dust free working area
• Adjustment switch for easy adjustment of cutting depth
• Front and rear shoe have a v-groove for easy chamfer cutting
• Automatic kickstand to protect surfaces from accidental planer contact
• Lock off switch for safety
• Ergonomic handle design with large soft-grip area for maximum comfort
• Die-cast base for high durability
|
|
ENESKA 3-1 - The classic all-rounder
The classic from JOKE®. Developed for light to medium jobs in tool
and mould building. During development, this system was really put
to the test and continually perfected in countless practical tests.
That’s why it can take hard use in a professional environment.
|
|
Flexible Shaft Machines supply new-found freedoms: By seperating the motor from the tool with a shaft, it is no longer necessary to bring a bulky tool to your workpiece. Instead, the motor can rest on the floor or hang from a nearby hook. As a result, it is no longer necessary to support the weight of the power tool while grinding. The handpieces are extremely small, and can reach into areas that are simply not accessible by any hand-held straight grinder. By placing the power source away from the application and out of view, users experience freedom from heat, noise and vibration from the power source.
Industrial flexible shaft tools are offered in several styles, from a small 500 watt machine with 120 volt right up to our high end Mammoth machine, which is 3-phase, 480 volt, 1 horsepower.
|
|
7° Offset Buffer/ Polisher
- 7° Offset ergonomic design for control and comfort
- High torque planetary-geared air motor; muffler reduces sound level
- Conventional rotary action
- Pad Diametre: 76 mm (3")
- RPM: 3200 or 5000
|
|
Dynabuffer
- Ideal for use with Two-Step Polishing Systems
- Tool runs at 10.000 RPM free speed, but slows to 7.000 RPM when running under load
- Rear exhaust muffler design reduces noise levels
- Non-marring housing cover is insulated for operator comfort
- Throttle lever may be positioned for right or left hand operation
- Patented balancer compensates for vibration when running under load
- Different Pad Diametres: 76 mm (3") or 127 mm (5")
- Available with or without hanger bracket
|
|
150/MICRO
Air pressure : max 10 bar
Air consumption : 300 l/min.
Spindle length : 80 mm
Spindle diameter : Ø50 mm
Abrasive blades : 10 pcs
Type of abrasive blades : 150/50
Distance rings : 50/8
Weight incl. abrasives : 800 g
|
|
50,000 – 100,000 RPM
0.06 – 0.2 hp (0.044 – 0.015 kW)
■ Variety of configurations to meet all
your application needs
■ Ideal for precision deburring and
metal removal
■ Turbine, governed and nongoverned
models available
■ 1 2-03 right angle gearless model
to reduce maintenance and
downtime
|
|
S14HW, 14" Wet Horizontal Belt Sander
Also available DRY !
Great for getting parts FLAT !!
14" x 103" belt
3400 SFPM
Steel platen 14-1/2" x 36"
Work surface 14" x 32"
Air tension on belt, 0-55 PSI reqd.
20 HP, 3 PH TEFC
Mag controls with jog, 24 volts at pushbutton
L 64" x W 31" x H 35"
Wt: 1900 lbs
Model: S14HW, 14"x 103", 20 hp.,220/440/60hz 3 ph. 24 volt at switch.
10 gal. coolant tank & pump.
Model: S14HD, as above, less coolant tank & pump.
Other products available:
|
|
|
|
Sanding and polishing tooling
