|
|
The VAC-U-MAX Bulk Bag Unloader was specifically designed to provide an easy, clean and economical way to discharge the entire contents of bulk and semi-bulk bags, especially when the material is less than free-flowing.
Bags can be placed in the unloader by fork lift, hoist or crane from floor level. An integral hoist on a monorail can be furnished if desired. Standard arrangement includes a bag frame to which the suspension loops of the bag can be attached while the bag is resting on the floor. The bag frame is then raised and positioned so the hooks on the frame engage a counter-balanced suspension frame in the superstructure of the unloader. When lowered, the bottom of the bag rests on a sealing ring in the unloader bed and the tension on the bag loops keeps the bag upright. Optional pneumatically operated actuator petals massage the lower portion of the bag to promote material flow toward the center of the bag.
|
|
The meurer CM/HA handle applicator provides the
packaging units with a handle. This ensures that jars,
bottles, cans and beverage packs in film or trays can
be transported easily.
• For handles that are pre-fitted as well as for those that
can be fitted individually
• Easy maintenance and cleaning due to open balcony
construction
• Product change-over can easily be selected via touch
screen
• Low-maintenance design
• State-of-the-art servo control system
• Low Noise operation
• Ethernet interfaces
• 60 packs/min. (single-laned)
• 120 packs/min. (double-laned)
|
|
The HA automatic handle applicators can apply handles on shrink film packs, cardboard cases, bricks or any type of rigid packs.
Handles can also be applied on pack collations having an even number of products as leading side: 2X2, 4X2, 4X3, 6X2,...
In addition products can pass through the HA handle applicators without any handle being applied on them.
The HA series can apply three different types of handles, joined to a transparent adhesive tape and made from:
- precut cardboard labels
- polypropylene reel fed labels
- Kraft paper reel fed labels
|
|
Automatic vertical & orizontal packaging machines
- Built for mailing
- Cost savings by using film
- Safer way of mailing
- High performances & low consumption (from 1200 to 3000 pcs/hour)
|
|
|
|
|
|
Automatic high-performance film wrapper "Delta 2000"
Automatic film wrapper for wrapping loosely stacked newspapers and magazines in PE film.
Special customer benefit:
• The packages withdraw the upper film from the film magazine
with minimal force. The stacks do not fan out
• The lower film is delivered in sync with package conveyance. The
film supplied is just sufficient for the present package
• Lateral welding can be integrated. You do not require a second
machine, which takes up space. The unit can be retrofitted as
optional equipment and does not reduce the capacity of the
machine
• Servo drive for welding unit with very fast and accurate motion
sequences. The film welding seam is easy to reproduce
• Frequency-controlled transport. Machine can easily be integrated
into existing lines
• Operation via Touchscreen, machine status and faults on plain
text display
• The operator only has to look after the buttons which he needs for the current machine status.
• Low-maintenance design. Low operating costs.
|
|
The CONTINUA is a completely automatic horizontal packaging machine, extremely compact and with an innovate sealing system (worldwide patented). The products, placed with insuitably adjustedside guides, are driven into a forming box by a couploe of pusher, while the central sealing is carried out by a heated wheel. The film wrapping the products runs on a loose conveyor belt driven by two pliers that, trought an alternate movement, seal and cut the film trasversally. Bags are then ejected throughan opening at the end of the machine.
ADVANTAGES :
- Use of flat film – great saving on Film
- Small investment for a high performance machine
- Automatic feeder for magazines, CD’s and DVD’s
- User friendly and energy – saving
- Quick job changeover
- Films which can be used: PE, polyolephine films, PP.
|
|
Shuttle welder with output power starting from 4 up to 20kW with two work tables gliding on rails (pneumatic or manual) may be used in many industries for welding/molding elements made of PVC. It is also great machine for blister packing.
It has two (2) workstations allowing for simultaneous work of two operators or much efficient work cycle by one operator.
Custom designed tooling (electrodes) provides aesthetic and durable weld during production cycle.
The machine has two separate temperature sensors for problem free and efficient working conditions of the RF generator. It has programmable PLC steering, fast and efficient antiflash system and it's fully CE compliant.
medical and healthcare equipment
advertising and promotion
safety clothing
office accessories
blisters
-----------------------------------------------
zgrzewarki, wykrawarki, formierki
hf welders, rf welders, roller die cutters
Stretch ceiling machines, Zemat TG
-----------------------------------------------
|
|
|
To protect, to improve the presentation, to dispatch in full safety, identify with the first glance, to join together two or several products, the blister is ideal. The products are packed between a bottom out of paperboard and a rigid plastic hull thermo welded. The loading is manual on a revolving plate.
|
|
BTV 15
Packaging machine BVT 15 is used for forming of Blisters (cups) from PVC and PETP foil. The process is completely automatic. Drive of the machine is pneumatic and this machine is equiped with SIEMENS control system. There is a possibility to integrate this machine into the automatic line with filling and closing of blisters.
Machine speed : 22 cykles/min
Blister width : 150x250 mm
Blister length : 60 mm
Machine weight : 400 kg
Power consumption : 3,75 kVA
Air pressure : 6 bar
|
|
|
New generation of well known Blisterflex thermoformer, in high productivity version and GMP design. Very low maintenance. Raised efficiency and extremely versatile, produces blisters in the combinations of traditional materials PVC/ALU, PVDC/ALU, ACLAR/ALU, as well as ALU/ALU.
|
|
|
|
|
|
Small footprint, high flexibility
Over 600 Noack DPN760 machines in operation worldwide are proof of the confidence users in ethical, generics and contract sector place in Noack technology. The flexibility of the intermittent motion Noack DPN760 provides both operation in a standalone basis, as well as integration with the cartoner, such as a Promatic P91 horizontal cartoning machine.
As a compact, entry-level solution, it is ideal to start-up operations buth also offers a number of upgrade options to increase productivity. Its proven technology has been continually enhanced to serve the changing needs of the marketplace, established the next generation DPN760 as a key choice within the contract and generic markets, where fast changeover, reliability and high utilization are essential.
Key advantages
- Quick changeover thanks to latest servo technology, format parts with quick release, light-weight format parts and electronically stored format parameters
- Processes all common thermoformable films
- Established and successful experience with alu cold forming
- Powerful PLC with operator friendly touch panel
- Upgrade options include automatic feeding systems, filling inspection and ejection station, in-line foil printer, print mark registration and complete line with Promatic cartoner
- All Noack format parts will be tested and optinized on one of our dedicated test machines
|
|
Blister machine UPS 1040
Universal and highly successful blister machine in the medium to high-speed category with intermittent platen sealing.
- Intermittent web index with platen sealing and multi-stroke punching
- Machine adjustment at the touch of a button
- Two-and-three-lane operation with up to 60 forming cycles/minute and 200 punching cycles
- Output of up to 600 blisters/min
- As an intermittent-motion machine ideal for the production of alu/alu blisters, large blisters with stiffening ribs, calendar packs etc.
|
|
|
|
|
|
The Formpack models F4 and F5 are thermoforming machines able to satisfy both medium and high production requirements, depending on the different kinds of customization.
The main features of both models are as follows:
- They can be used with a wide variety of thermoform films, including flexible, rigid and foamed materials. All standard sealing materials such as plastic, medical paper and tyvec can be used.
- The F4 and F5 machines are available in both seal-only format and vacuum-gas format for producing vacuum, MAP and skin packs.
- The machines can be customized regards the length of frame, the mould motion, the thermoforming system, the loading area, the number and type of cutting stations.
- Both models are suitable for working in damp, aggressive environments as the chassis, all protection covers and bearings are made from stainless steel and the machine is IP65 rated.
- No external lubrication is required.
- Colour touch-screen with error diagnostic function. It can also display the electric and pneumatic schemes and some basic instructions.
- Changeover with quick release
- Other options include shape cutting, printed top web, coding units, in-line printing and labelling systems, in-line dosing/filling systems.
|
|
|
|
|
|
With know-how and innovation we have developed blister lines for in-line production of blister packages where future-oriented and innovative technologies are used.
If simple carton standard blisters or environmental-friendly mono-material packs with fully recyclable blisters or soft film blisters for medical use or high-quality 3D-blisters with superior design or Tyvek blisters or …
One of our fully automatic blister lines with numerous integration and extension possibilities will always fulfill your demands.
KOCH blister line KBS-KF
Blister line for large blisters with cover film of different materials.
The blister line KBS-KF - for in-line production of mono-material blister packs with cover film: absolutely trouble-free. In the choice of format and in the choice of materials that will be used for the blister packs. PE, PET, PVC, Tyvek, aluminum or lot of other materials.
Advantages of this machine technology
- Very high cycle rate
- Low tool costs, as no pallets or tool carriers are required
- Quick change-over
- Very quiet because various servo-motor drives
- Easily to service due to modular construction and modern machine design
- Latest PC technology with operator convenient control via 15“ touch screen
- Remote diagnostics via internet or modem
|
|
These machines are designed for industries that use blisterpacks to present their products (rigid PVC, PETG/Barex tamperproof and transparent packaging), such as:
automobile accessories and spare parts,
electrical parts (sockets, switches, etc.),
electronic accessories and spare parts (multimedia and computer components),
audio and video equipment accessories and spare parts,
photography items (cameras, cartridges, accessories),
sport items and accessories,
telephones,
tools,
toys (cars, dolls),
etc…
THIMONNIER manufactures semi-automatic or automatic blisterpack machines.
|
|
|
|
|
|
UNIVERS 3500
Automatic blister thermoforming machine for rigid film with medium-high performance level.
Automatic machine for continuous manufacture of blister packages, aimed at industrial products : accesories, spares, houseld, etc. mainly oriented to free service sales.
The Univers model unifies in a totally automatic single line the different operations made in a conventional blister packing process:
- Package format.
- Product feeding.
- Cover sealing.
- Package die cutting.
Once the package film heated (rigid films up to 500 micron thick), the machine can use different forming systems depending on the needs of each product : positive forming, negative forming or mechanically-assisted forming.
A large loading area eases product feeding in some housings created by the machine in a continuous process.
Package cover is placed in the sealing station. This cover can be made of board or plastic film, so obtaining board-plastic or plastic-plastic packages, depending on the needs of the customer in each case.
Packages are cut into units in the cutting station. Then, they come out of the station on an output belt.
The control system with programmable automaton includes a simple communication system by means of a touch screen which informs about the state of the machine and control parameters.
|
|
|
Sigpack Systems pillow packs are one of the most economical and popular types of packaging. They are favored for their high quality seals and economic use of material. They can be used to pack most food and non-food goods efficiently and economically. Furthermore, they can be made from most common packaging materials.
|
|
|
IWK Verpackungstechnik GmbH offer solutions for unconventional and extraordinary packaging requirements, especially in the field of solida for the pharmaceutical industry. A gap has been closed in IWK´s primary packaging machinery program through the development of a new blister machine generation.
|
|
In this era of global competition, establishing economy on product overheads is one of the prime challenges every pharmaceutical company is faced with. More so when the product succeeds in the marketplace.
Recognizing this very need Pam-Pac presents to you UNIPAC - a versatile machine packed with unique features built into a compact construction. Servo powered UNIPAC is precisely designed to meet high-speed blister-packing requirements. Based on flat forming & rotary sealing principle for delivering higher outputs, it is suitable for packing all types of tablets and capsules.
Features
- Servo driven forming indexing enables ease of setting.
- Quick change over.
- Additional rotary vacuum forming station as an option to accommodate rotary vacuum forming change parts.
- "Pick and Place" system for direct link up with cartoning machine without conveyor.
- Output up to 400 blisters/minute.
|
|
BP 102
Save money and time using BP-102 with single drum for continuous forming and sealing. Ideal for low-cost packaging of the highest quality. Brought to you by Pam-Pac, each high-tech packaging machine is equipped with outstanding features offered for the first time in India.
Thermo-forming machine BP-102 is specially developed to optimise your investment in the machine and change parts.
Pam-Pac offers you the best combination of price, features, level of automation and flexibility. It's value for money, offered only by Pam-Pac.
Features
- Flat blisters with reduced curvature.
- Compact blister size enables saving in Foil consumption.
- Quick change over.
- Multiple feeding possible up to 5 different products.
- Low power consumption.
- Unique ‘2 in 1’ change parts optimizes your investment.
- Output up to 240 blisters/minute.
|
|
TR 135
TR135 is an extremely versatile machine suitable for medium outputs even with high product diversification working with all kinds of packaging materials.
The TR135 has a compact construction to assure the greatest accessibility, ease of use and complete view of all parts. Its reduced working area enables the installation in a small production space. It applies the principle of continuous motion in feeding and uses highly reliable technology such as IMA roller sealing.
The cleaning procedures are facilitated thanks to the clean machine design where all the areas are clearly separate from each other. The changeover is very easy, fast and without tools, with very few parts to be changed and without the need for fine adjustments.
All operator's interventions take place mainly at the front of the machine to optimise machine productivity.
|
|
TR 135
TR135 is an extremely versatile machine suitable for medium outputs even with high product diversification working with all kinds of packaging materials.
The TR135 has a compact construction to assure the greatest accessibility, ease of use and complete view of all parts. Its reduced working area enables the installation in a small production space. It applies the principle of continuous motion in feeding and uses highly reliable technology such as IMA roller sealing.
The cleaning procedures are facilitated thanks to the clean machine design where all the areas are clearly separate from each other. The changeover is very easy, fast and without tools, with very few parts to be changed and without the need for fine adjustments.
All operator's interventions take place mainly at the front of the machine to optimise machine productivity.
|
|
BS 700
Blistering machine for double sterile packaging format, with alu-alu blisters.
The machine is designed to work in Class 100 aseptic environments and packages sterile blisters containing unit-doses filled with surgical products.
Max production rate: 5.000 unit-doses /hour
|
|
Blister machine B 1240
Enter the world of the finest blister packaging machinery. This machine concept has been developed for performance, featuring the technological standards of large blister machines. It allows GMP-optimized pharmaceutical production at an unbelievable price/performance ratio.
- Servo-controlled universal blister machine
- Successors to the successful UPS 300
- PVC and alu/alu blisters
- Storing of all format-dependent data
- Very reasonably priced platen tools
- Up to 70 cycles and 350 blisters per minute
- Draw depth up to 24 mm
- Highest standard of production reliability and blister quality through self-regulating systems
- Optional features for virtually all applications
|
|
Bottle’s director-AV
Bottle’s director 90°-180°
BOTTLE’S DIRECTOR-AV is an automatic machine that permits the product orientation of 90°-180°.
This machine could be positioned before the filling machine, labelling machine, codifier and in particular before the carton packer Serie MEGA and Serie COMPACT.
BOTTLE’S DIRECTOR-AV allows a perfect syncronism of product rotation and the product speed of the production line. It is adapted for medium and high productivity.
|
|
|
Posimat builds and supplies Rotary Orientors that once connected to the Posimat, are able to correctly orientate cylindrical or squared based bottles, which could not be oriented with a Giramat.
|
|
Macofar Sterilizing Tunnel T 600
The Sterilizing Tunnel series is available in 4 different sizes. The sterilization is based on the laminar flow principle. Depending on your needs, different combinations of the infeed, sterilizing and cooling area are possible.
The integrity of the seal on the absolute filters is assured by ceramic fiber gaskets. The area around the frame is connected to the aspiration area of the respective fans, thus creating a depression zone between the up and down stream sterile areas. That avoids and accidental infiltration of non sterile air through the gaskets.
The reference temperature for the depyrogenization has been established by International Pharmacopoeia at 250 ° C.
|
|
|
|
Miscellaneous packing machines
