|
|
Ready-to-use centrifugal systems. The patented Vetamat® system separates the metal chips from the metalworking fluids.
Wet chips are shaken into the funnel and fed automatically into the centrifuge from there. The delivery includes the centrifuge with hydraulics, chip conveyor with tank, base pan and controller. The Vetamat® Plus system design also includes a chip crusher and a lift & tip device. Long chips are first filled into the lift & tip device by a chip transporter and then tipped into the chip crusher. The crushed chips fall into the funnel and land in the centrifuge.
Vetamat® systems achieve a throughput of 100 kg/h – 2,000 kg/h. Vetamat® systems are delivered ready to use.
|
|
|
|
|
|
VARISORT CME-P - Combined colour and metal separation system for plastics recycling applications (material fed by conveyor)
The VARISORT CME-P combined colour and metal separator is designed for use in the plastics recycling industry to remove metal (cans, foil-lined Tetrapaks etc) and off-colour contaminants (bottles, cups etc) from plastic bulk materials. The material to be inspected is spread out on a fast-moving conveyor so that the pieces are optimally individualised before they reach the inspection area of the multi-channel metal detector. If a contaminant is detected its exact location is determined. Electronics evaluate this position and ejection nozzles are activated with pinpoint accuracy and at precisely the right time to blow out the contaminant. The ejection nozzles are so precise that the metal and off-colour contaminants are removed with very little loss of good material and without any interruption to the material flow.
Advantages:
• removes metal, metal composites and inclusions
• removes contaminants with pinpoint accuracy
• modular design
• evaluation of the entire visible light spectrum
• self-teaching evaluation electronics
Typical applications:
• removes cans from lightweight packaging
• removes off-colour plastic bottles
• removes metals/off-colours from specialized plastics
|
|
Combined magnetic separation solutions
Application: automatic separation/recovery of ferrous and non-ferrous materials.
Main features:
- Custom-designed and manufactured separation solutions for specific applications, combining conveying, vibratory, screening, magnetic separation and metal detection equipment;
- Single operating console for complete control over the whole system;
(!) For conducting laboratory tests with your material please contact our sales department.
(!) Please attach a completed questionnaire to quotation requests.
|
|
Rescue Equipment
Tests on modern vehicle construction have shown that the new STREAMLINETechnology cutters are not only capable of cutting the hardest materials found today without any difficulty, they also possess enough power to potentially handle new challenges in the future!
The advanced design of these cutters offer impressive operating speeds and large cutter opening’s to provide maximum efficiency on any rescue scene.
Through extreme material strength STREAMLINETechnology cutters provide maximum durability and prevention of blades breakings.
When uncompromising quality and power are demanded, STREAMLINETechnology cutters are the reliable choice for use in any rescue operation.
- cutting force up to 310 kN
- opening of the blades up to 275 mm
|
|
HSM office technology offers a large family of various document shredders, each one precisely tailored to a specific requirement. Whether for home offices, work offices, IT departments or professional document shredding. The only thing that never changes is the first-class quality of our high-end machines which are "Made in Germany".
|
|
Our shredders have been created for information security for your home and office.
In general we provide two types depending on the material: one for document only, and the other for paper, CD, etc.
Depending on the capacity, you offer large capacity and smaller capacity.
For more detailed information, please do not hesitate to contact one of our representatives.
|
|
Cogelme Eddy Current Separator extracts non-ferrous metals of extremely thin dimensions - down to 2 mm sizes from various grinded and granulated material.
Combination of design and the scale of performance make it adaptable to many non-ferrous metal extraction cases. Are applied in commercial, recycling or industrial production, wherever non-ferrous metals have to be extracted from: Plastic, Rubber, Glass, Wee, RDF, Wood chips, Foundry sand, etc.
|
|
|
|
|
|
Cogelme Eddy Current Separators excellent recovers non-ferrous metals (aluminium, copper, brass, etc.) from recyclable material.
Are applied in commercial, recycling or industrial production, wherever non-ferrous metals have to be extracted from:
Plastic, Rubber, Glass, Municipal waste, RDF, Construction waste, Wood chips, Stones, Foundry sand, etc.
Performance way:
a rapidly rotating system of permanent magnets in the head drum generates high-frequency changing magnetic fields. Where non ferrous metals jump out, while the inert materials freely fall down to another
container. All iron is kept by the magnetic drum and downloaded in the proper container under the Eddy Current Separator.
These cost effective and proved Separators are designed according the ultimate physics and enginering science to create the best separation opportunity.
Do you want to be more confident? Our experts will guide you through the technology capabilities for your case, show you how you can apply this equipment and what results you can achieve to ensure you can increase your productivity and profitability.
|
|
|
Ideal for material recovery facilities wishing to automate removal of aluminum beverage cans from commingled recyclables. Available in feed widths of 24, 36 and 48 inches (610, 914 and 1220 mm).
|
|
|
|
|
|
Ideal for material recovery facilities wishing to automate removal of nonferrous metals from trash, MSW, sand, glass, dirt, electronic scrap and shredded automobiles. Available in feed widths of 24, 36, 48 and 60 inches (610, 914, 1220, and 1524 mm).
Foundry Sand: remove non-ferrous metals like aluminum or brass from spent foundry sandmold chunks. This provides a remeltable metal and the sand can be treated and reused or land-filled as non-hazardous waste.
Glass: remove nonferrous metals from recycled glass monitors, fluorescent bulbs and other specialty glass.
Wood Waste: the final step in purifying shredded pallets, wood paneling and lumber before it is ground and mixed with resins to press out medium density fiberboard (MDF).
PET/Plastics: remove trace amounts of small nonferrous metallics from granulated plastic PET beverage bottles. This allows the flakes to be used to make new products including banding.
Boiler Bottom Ash: remove nonferrous metals from bottom ash generated by refuse (garbage) fueled co-gen plants. Aluminum used beverage cans (UBCs) that look like nuggets and red metals like faucets/plumbing hardware are typically repelled.
|
|
NON-FERROUS SEPARATORS (EDDY CURRENT PRINCIPLE)
Removing non-magnetic metals, such as Aluminium, Copper, Brass) from 4 mm
Specific application: recycling, such as: incineration waste, glass, wood, household waste, rubble, plastic, WEEE scrap, refrigerators, shredder residue etc.
Cleaning: automatic, continuous
Suitable for belt widths up to 2000 mm
Electrical current required
|
|
Eddy current separators (Non-ferrous metal separators)
Application: Automated recovery of non-ferrous metals from waste material, glass cullet, shredder material, foundry sand, wood chips, etc.
Main features:
- Custom-manufactured models with a wide range of options for special applications;
- Powerful Nd-Fe-B magnets used;
- Both eccentric & concentric pole systems available;
- Field-tested solutions, reliable units and assemblies;
- Equipment can be linked to existing control systems;
(!) For conducting laboratory tests with your material please contact our sales department.
(!) All the ECS models are custom-manufactured, please attach a completed questionnaire to quotation requests.
|
|
|
The Separator of Non-Iron Metals by Eddy Currents (R-SPM) is able to separate the Non-Iron metals from the rest of the materials due to its studied magnetic collection called the “Inductor Drum”, which rotates at high speed. When a Non-Iron Metal crosses the induced magnetic field, it undergoes an repulsion effect and jumps a certain distance ahead of the Foucault drum and away from the rest of the materials.
|
|
Overband Magnet
For removal of the majority of liberated steel.
|
|
Shredder material, municipal waste, incinerator, ash, Foundry sand, Glass, Electronic scrap, Wood chips, Batteries
The mechanical recovery of non-ferrous metals is the economic basis of all recycling – and the STEINERT Eddy Current Separator with Eccentric Pole System fulfils the associated requirements perfectly! High yield and long life are the qualities that make for assured, long-term operating results.
The non-ferrous metal separator can be used wherever non-ferrous metals have to be recovered or separated. This includes the recycling of aluminium or the processing of shredder material, municipal waste, incinerator ash, electronic scrap, wood chips, glass, batteries and foundry sand.
|
|
|
It represents an ideal equipment for the agglomeration, granulation and mixing of food, chemical and pharmaceutical powders. It is successfully used in the additivation ( flavouring, colouring, etc.) and encapsulation of mixtures or powdery products thanks to the proved uniformity and homogeneity of its fluid-bed process. Its use is suitable for thermosensitive products. It is available in several construction materials.
|
|
OYSTAR Hüttlin fluid bed systems have a modular design. The base devices are designed as heavy-duty 10 bar or 12 bar excess pressure lines and can be adjusted using various different options.
Depending on the application required the Oystar Hüttlin fluid bed system can be configurated as:
HD Hüttlin dryer
HDG Hüttlin dryer granulator
HDGC Hüttlin dryer granulator coater
OYSTAR Hüttlin concept solutions mark a clear move away from the conventional technology of the past almost 40 years. The different detailed solutions such as the Diskjet, the spraying system, the dynamic filter and the gas analysis for organic processes involve major process advantages that greatly benefit the user.
|
|
for the removal of iron, steel and non-ferrous items from (recycled) materials, such as household refuse, glass, rubber, timber, coal and building & Demolition waste
|
|
Automatically remove and elevate ferrous materials such as chips, turnings and small parts. Conveyor mechanism is totally enclosed. Wide variety of configurations can be assembled from standard design sections.
Chip & Parts Conveyor - Standard Utility Model 68
Standard model for lightweight material.
Chip & Parts Conveyors - Low Profile Permanent Magnetic
Control lightweight ferrous materials.
Chip & Parts Conveyors - Model 6
6-1/4 in. (159mm) deep housing to transport small volumes of chips.
Chip & Parts Conveyors - Model 9
9-1/4 in. (235mm) depth for greater volumes.
Chip & Parts Conveyors - Model 12
12-1/4 inch (311mm) depth for high volumes of chips.
Chip & Parts Conveyors - Model 21
21-1/4 in. (540mm) working width for high volume conveying.
|
|
The conveyor Turbo Magnetic is specially designed for Multi-tasking machines producing fine chips of ferrous material. The Turbo Magnetic features a heavy gauge stainless steel slider face for a long life in extreme wear conditions. All moving parts are contained inside the conveyor’s viton sealed frame so they are never exposed to machining contaminates. The conveyor belt is automatically tensioned.
Self-lubricated Track
No lubrication oil inside the conveyor to leak and contaminate the coolant.
Reduced Coolant Carry-out
A variable speed drive (AC Inverter) is standard on all units to maximize chip removal and minimize coolant loss.
Easily-Replaceable Magnets
Turbo components, including individual magnet segments, are easily and economically replaced if the conveyor is accidentally damaged.
|
|
|
|
|
|
Heavy-Duty Magnetic Conveyors - For dependable, maintenance-free, positive transfer of ferrous metal scrap and parts with no carryover.
Features, Benefits, & Options:
- Conveys wet or dry ferrous chips, stamping slugs, stamping scrap, or parts
- Rugged, long life stainless steel slider bed
- Available in straight, L-style, or Z-style configurations
- Alloy steel bar tracks, precisely guide chain and magnetic assemblies
- Self adjusting drive chain take-ups
- Completely sealed, oil tight construction for quiet self-lubricating performance
- Available with permanent ceramic or optional rare earth magnets
- Extended height elevation and pivoting conveyors (to be inserted into your press) are also available
--------------------------------------------------------------------------------
Standard Duty Magnetic Conveyors - Low profile - Only 3 3/8 inch high! An economical alternative for less demanding applications. For dependable, maintenance free, positive transfer of ferrous scrap and parts with no carryover.
Features, Benefits, & Options:
- Conveys wet or dry ferrous chips, stamping slugs, stamping scrap, or parts
- Rugged, long life stainless steel slider bed
- Available in straight, L-style, or Z-style configurations
- Features a steel encased UHMW low friction track
- Quiet, self lubricating performance
- Supplied with permanent ceramic magnets
|
|
|
|
|
|
Bunting MagSlide® Magnetic Slide Chip and Parts Conveyors are built to handle the tough jobs. Dirty, oily parts, jagged, abrasive scrap, and other punishing materials that could damage or jam conventional conveyors are no challenge for Bunting's 3-D CAD-designed, ruggedly constructed slide plate conveyors. They are ideal for use anywhere you need to transfer ferrous chips, turnings, and small parts from lathes, mills, or stamping presses or from slitting, forming, and other metalworking operations. Chain-driven, permanently charged high-energy Ceramic magnets inside the conveyor housing attract and move ferrous material along the conveyor's stainless steel faceplate. Optional water-tight housings can be submerged into almost any type of hot or cold liquid.
MagSlide Conveyors are engineered for trouble-free, virtually maintenance-free operation. There's no external belt to jam, tear, or wear out from carrying sharp, abrasive parts and scrap.
Get Outstanding Performance and Value
- Rugged construction
- Continuous chain lubrication with oil-impregnated UHMWPE SlideTrack™
- Oil ports to allow extended chain service
- High-energy Ceramic or Rare Earth Magnets matched to your application
- Durable stainless steel slider beds
- Sealed precision drive and take-up bearings
- Designed with 3-D solid-model technology
- Precision manufactured on CNC machines
- Optional submersible housings
|
|
Magnetic conveyor M
Areas of application
Transportation of short ferromagnetic, emulsion-afflicted shavings and small parts, e.g. stampings. Installation possible as individual conveyor or interlinked system.
Function
A continuous magnetic band conveyor, consisting of two chain strands which have been connected by means of carrying strips and permanent magnets, continuously conveys the material to be conveyed on the conveyor plate to the discharge station. Pre-cleaning of the cooling lubricant without additional cleaning elements. The magnetic band drive occurs via a three-phase geared motor. The magnetic band has been installed self-tight eningly.
|
|
|
|
|
|
Magnetic equipment used to recover ferrous and non-ferrous metals from automobile shredder residue, garbage, electronic/computer scrap and bottom ash. Also to purify glass cullet, plastics/pet, foundry sand and wood waste.
Eddy Current Separators
Ideal for material recovery facilities wishing to automate removal of nonferrous metals from trash, MSW, sand, glass, dirt, electronic scrap and shredded automobiles.
Drum Magnet Separators
Designed for the removal of ferrous material from shredded automobiles, bottom ash, slag and other recyclable scrap including chips, turnings and stampings.
Suspended Belt Magnets
These powerful electromagnetic separators are self cleaning with a variety of specialized belt styles.
Pulley Magnets
Used as head pulley in belt conveyors for continuous automatic removal of ferrous from non-ferrous material.
Metal Detectors
Rugged, yet highly sensitive instruments designed to detect ferrous and nonferrous metallics in a variety of bulk materials.
Rectifiers/DC Power Supplies
Convert AC power to DC power to operate Electromagnetic Drums, Pulleys, & Belt Magnets.
Magnetic and Eddy Current Separator Duo
Need to reliably separate aluminum flakes from polyethylene terephthalate (PET) at your facility?
|
|
Magnetic drum TM model.
The magnetic drum TM substitutes the drive drum of the conveyor belt, separating ferric metals from any other inert , loose product. When it reaches the end of the belt, the material conveyed falls but the ferric metals are retainded by the drum, falling in a different direction to the purified material.
|
|
Used as head pulley in belt conveyors for continuous automatic removal of ferrous from non-ferrous material. Eriez new axial-interpole circuit provides very high ferrous recovery.
Permanent Magnetic Pulleys
Often used to convert a belt conveyor into a powerful magnetic separator.
|
|
Magnetic Pulleys
Application: Automatic extraction of tramp iron from various products (ore, coal, waste, cullet, etc.), protection of processing machinery.
Main features:
- Custom-manufactured models - wide range of drum diameters, lengths, magnetic field strengths available;
- Exact copies of existing pulleys can be manufactured for easy replacement;
- Reliable and suitable for heavy duty applications;
- Powerful Nd-Fe-B magnets used;
- No electric power required for magnetic field generation;
- Equipment can be linked to existing control systems;
(!) For conducting laboratory tests with your material please contact our sales department.
(!) All magnetic pulleys are custom-manufactured, please attach a completed questionnaire to quotation requests.
|
|
|
When material passes over the pulley, ferrous metal objects are attracted by the magnetic field and held tightly as the belt travels around the pulley are not released until they leave the influence of the magnet. Non-magnetic materials follow a normal trajectory. A divider plate can be installed to ensure that no remixing occurs. Standard diameters range from 6" to 36," and standard widths range from 10" to 62." Shaft size depends on length and weight
|
|
Slag, minerals, wood chips, glass, Sand, WEEE, Shredder Residues, Municipal Waste
STEINERT Magnetic Head Pulleys attract tramp iron from these bulk materials in the same space as the normal conveyor belt head pulley. This avoids extensive reconstruction of your plant. Magnetic Head Pulleys protect your valuable processing equipment from damage by tramp iron that drum or suspension magnets miss buried in the burden.
STEINERT Magnetic pulleys are usually operated after the extraction of larger iron parts by other magnetic separators. Magnetic pulleys with strong neodymium type magnets can reclaim small, low magnetic particles - partially stainless - from the bulk materials.
|
|
Bunting Magnetic Separation Pulleys are engineered for easy installation in belt conveyors. They feature a radial magnetic field that gives complete magnetic protection over the entire face of the pulley for superior removal of ferrous contaminants.
Separation Pulleys can replace existing pulleys at the discharge end of a conveyor line and be used alone or in combination with other Bunting Separators designed for conveyor applications like our Suspended Plate Magnets and Cross-Belt Separators.
o Continuously remove and discharge tramp metal from material flow.
o Radial magnetic design eliminates dead spots.
o Order standard high-density Ceramic or optional Rare Earth magnets.
o Sizes to fit your conveyor with removable or fixed shafts.
o Select 6", 8", 10", 12", 18",or 24" diameters.
o Specify widths in 2" increments.
o Enjoy maintenance-free operation.
|
|
|
|
Other equipment for waste treatment
