|
|
All of the Engels 2-wheel containers comply with the EN 840 standards. Not only have they been TüV-approved, they are also cadmium-free and UV-resistant.
The containers are made of impact resistant plastic. The 2-wheel containers can be delivered from stock in various volumes and colour combinations.
In addition, Engels has succeeded in equipping the standard container with many options so that the range of containers for specific applications is infinite.
Containers for confidential paper or the safe collection of glass is now standard. The containers can be delivered with an indelible imprint.
|
|
|
Justrite Cease-Fire® Waste Receptacles are specially contoured to direct smoke and gas from any fire inside the container, back into the combustion area, cutting off the air supply and extinguishing flames in seconds. Cease-Fire® Receptacles provide round-the-clock protection against trash fires and are suitable for use in plants, hospitals, schools, offices and stores.
|
|
|
|
|
|
95 Gallon Universal Roll-out Cart, Model ROC-95U
Universal Roll-out Carts are designed for both automated and semi-automated collection of household waste and recyclables. Injection molded with premium quality, resilient, high-density polyethylene (HDPE) resin, Rehrig Roll-out Carts are designed to provide many years of quality service and look good at the curb in virtually any neighborhood or climate found in North America. ROC-95U Roll-out Carts have an integrally molded-in plastic catch bar.
While evaluating possible molding methods in the early 1960's, Rehrig Pacific determined that only the injection molding method possessed the technology to mold complex geometric shapes, and the ability to maintain precise tolerances with exact predictability. A further advantage is the ability to vary wall thickness strategically throughout the same part, adding strength to critical wear and load-bearing points. As a result, injection molding allows Rehrig to engineer premium product quality, performance and dependability into every product we make.
Rehrig Roll-out Carts meet ANSI Safety Standard Z245.30 and ANSI Compatibility Standard Z245.60
Capacity: 95 gallons (360 lt)
|
|
Container great volume for heavy steel 3133 waste
Is useful for storage of heavy waste
CHARACTERISTICS
References - Capacity - Height - Width - Length
CDDA -- 1100 -- 1100 -- 1420 -- 1020 -- 1360
CDDA -- 770 -- 770 -- 1255 -- 770 -- 1360
|
|
Wherever hygiene and functionality matter. Stainless steel works equipment is particularly long-lived and ensures high stability and safety, GMP-compliant, easy to clean, simple handling, functional and adapted to particular requirements...
SCHNEIDER industrial furnishings:
- Designed to meet your functional and space requirements
- Hygienic workplaces
- GMP-compliant
- Easy to clean
- High stability
- Long service life
- Simple handling
- Excellent functionality
|
|
K60B
Trash can with folding Lid and rollers D.200 mm.
L.505, A.448, h.700 mm.
KA80
Trash can with folding Lid and rollers D.200 mm.
L.505, A.448, h.930 mm.
KA120
Trash can with folding Lid and rollers D.200 mm.
L.555, A.480, h.930 mm.
KA240
Trash can with folding Lid and rollers D.200 mm.
L.740, A.580, h.1.070 mm.
KA660
Trash can with folding Lid and rollers D.200 mm.
L.1.360, A.765, h.1.235 mm.
KA1100
Trash can with folding Lid and rollers D.200 mm.
L.1.360, A.1.220, h.1.470 mm.
|
|
|
|
|
|
These containers of recovery of waste oils of the SEMI type industrial Modhuile are equipped with a double tank of retention out of polyethylene, in conformity with standard XP-H-96618 and the decree of April 7th, 1997. Capacities: 600,1350 or 2500 liters. Broad funnel with boltable lid to pour waste oils. When the collector is full it is enough with the oil pick-up to remove the grid of filtration of the funnel and, to plunge its nozzle of aspiration to carry out draining. Finally it are equipped out of standard with a gauge with level and, of an electronic system of detection of escapes between the 2 tanks.
IN OPTION: Connection fireman DNN 50 if you do not want us that the oil pick-up uses the funnel of discharge to carry out draining collector as it is full.
This polyethylene collector answers perfectly a use in saline medium or corosifs. Simple of use, Their respective capacities of 600,1350, and 2500 liters meet the needs for each one. The gauge of level will enable you to know when the collector is full and will avoid any inopportune overflow. Its double tank of retention, in conformity with the regulations in force avoids any accidental pollution Enfin its system of detection ant-escape between the 2 walls will inform you in the event of escape of the receiving tank. Modhuile indistrielle of SEMI type fulfills the environmental requirements thus perfectly
|
|
|
|
|
|
Container of worn engine oil recovery standard M 1200 cd. This container is équipéd' a double tank of retention in conformity with standard XP-H-96618 and with the decree of the 4/7/1997, Its low part out of steel or stainless with an oil storage capacity of 1200 liters and its high part out of polyethylene has a receptacle for the storage of the empty cans of 750 liters. These other characteristics: measure level, counter of discharge of great capacity, connection of pumping DNN 50 standardized for the draining of the collector, ring of levage.FABRICATION FRENCH
This worn oil collector offers an excellent report/ratio QUALITE/PRIX. Its gauge of level will enable you to see when the collector is full and, that will avoid any inopportune overflow thus. Its under anti-corrosion layer and its completion in partly low painting polyurethane protects it from the bad weather and UV; Its high part out of polyethylene is appropriate perfectly for a use in saline medium. Finally its double tank of retention in conformity with standard XP-H-96618 and the decree of the 4/7/1997 avoids any inopportune pollution in the case or the receiving tank would be bored. He fulfills the environmental requirements thus perfectly
|
|
|
|
|
|
Container of worn engine oil recovery standard R1000 or R 1500. These containers entirely metal are equipped with a double tank of retention in conformity with standard XP-H-96618 and with the decree of the 4/7/1997, they have a respective oil storage capacity of 1250 or 1700 liters and 800 and 1250 liters for the storage of the empty cans. Another characteristics: measure level, counter of discharge of great capacity with shutter of protection and automatic system of locking per float when the collector is full, connection of pumping DNN 50 standardized for the draining of the collector. FRENCH MANUFACTURE
This worn oil collector, entirely metal, is robust and, an increased protection against the fire and vandalism offers. Its broad counter of discharge is equipped with a rain-proof shutter and an automatic system of locking when the collector is full: that avoids any inopportune overflow thus. Its under anti-corrosion layer and its completion in painting polyurethane protects it from the bad weather and of UV and, thus guarantees to him an optimal lifespan. Finally its double tank of retention in conformity with standard XP-H-96618 and the decree of the 4/7/1997 avoids any inopportune pollution in the case or the receiving tank would be bored. He fulfills the environmental requirements thus perfectly
|
|
Bunded Waste Oil Tanks
Tuffa 1400VBWOS
Capacity: 1400 litres / 300 gallons
Dimensions: 1576mm (DIA) x 1800mm (H)
Product Description - Complete with:
* Tundish
* Filter
* Vent
* Easy access yellow flip lid
A Tuffa Waste Oil Tank would benefit businesses in the motoring industry such as Garages, Bus Depots, Haulage companies etc. It will ensure that the waste oil is stored safely and securely at a reasonable price.
The Tuffa bunded waste oil tanks are designed with pollution control in mind and are manufactured to all appropriate current legislations with in the oil industry, pending correct installation. bunded waste oil tanks come in a range of sizes
|
|
|
|
|
|
This container of recovery of waste oils or the effluents (gray water or black water) with double tank of retention, out of polyethylene, is in conformity with standard XP-H-96118 and the decree of the 4/7/1997. With capacity 2500 and 5000 liters, it is equipped with an electric or manual pump and a nozzle of aspiration.
Other characteristics: trap door of access to the boltable pump, measures level, electronic system of detection of the escapes between the two walls, indicator digital of level with remote sensing, Raccord FIREMAN DNN 50.
It at summer especially conceived for the marinas.
it makes it possible to directly aspire waste oils or effluents to the source. Its great capacity makes it possible to space the draining of the collector. Its system of sensing remote when the collector is full allows to the person in charge of management waste not to systematically on the spot check the level of filling of the collector.
Its polyethilene structure protects it perfectly from the saline air and corrosion.
|
|
Urba is an ergonomic range of containers with a stylish design
Extremely easy to handle and safe, with a lid locking mechanism that makes them perfect for any domestic situation.
From kitchen caddies for an easy, effortless filling of the kitchen food waste to bigger capacity kerbside bins (20, 25, 40 litres) devised for door-to-door collection.
|
|
Urba 40 is an ergonomic and stylish container with tapering shaped body and square base.
It can be used at all types of properties, either inside or outside the home or office.
Strong handle with shaped grip is perfect for handling and opening.
Vertical handle stays in the upright position, reducing the need for bending.
Lid/handle locking mechanism reduces accidents, spillage and interference
from birds and animals with 2 lid opening and 2 lid locking positions.
Handle grip on the base makes emptying easier when the bin is inverted.
The small storage space allows for fitting the container under the sink, next to the kitchen waste caddy.
Urba 40 is suitable for any waste type sorting mainly for all recyclable dry materials (glass, paper, cans, plastic, etc.).
|
|
Urba is an ergonomic range of containers with a stylish design
Extremely easy to handle and safe, with a lid locking mechanism that makes them perfect for any domestic situation.
From kitchen caddies for an easy, effortless filling of the kitchen food waste to bigger capacity kerbside bins (20, 25, 40 litres) devised for door-to-door collection.
|
|
Safety containers for temporary storage and collection of different kinds of garbage (to be agreed with the order).
Made of shock-resistant oil-proof polypropylene, UV treated for permanent exposition to atmospheric agents according OSHNER, DIN, AFNOR regulations.
Single reinforced moulding.
Available safety-labeling for all models complying with national and EC regulations(D.L 22 of 05/02/97 D.L 626/94, D.L. 915/82 and following modifications).
Resistant to temperature between -10e and 100C.
|
|
CHARACTERISTICS:
Supplied of series with:
- settling tank
- filter sheet for the separation of the liquid and solid substances
- stopper of screw drainage for the liquids
- it rotates antinoise
|
|
Complete emptying by inversion - Low-cost - Practical - Capacity: 500 to 2000 litres. • Bin: 2mm sheet metal with reinforcing ribs. Upper edge: 3-ply blunt rim. • Exterior seam welding and interior spot welding.
Standard pedestal-mounted models are stackable - optional folding double cover
|
|
Standard bucket "BTR" for rotary forklift truck. All dimensions on request; Sheets ribbed on large sides and smooth on small sides, sleeves of forks for displacement and emptying with the lifting truck. Possibility of displacement to the transpallet; Possibility of having a face open on small side in particular for the storage of paperboards. FRENCH MANUFACTURE.
OPTION: wheels, hot galvanization, boltable lid in 2 parts, drainage sluice, double bottom, personalized Marking, carries label etc....
Standard bucket "BTR" is particularly economic if you have a fork-lift truck rotary, We carry out it with dimensions which meet your needs.
|
|
| ... products without technical information |
| |
|
|
Waste storage: containers, skips...
