|
|
Big Bag for dangerous waste with UV inhibitors.
Reinforced by polyethylene liner, airtight.
Four lifting straps, 30 cm long, breaking load kg 1500.
Duffle top and plain base without discharge spout.
BIG BAGS UN APPROVED
UN 3/Y approved Big Bag with max. load 1000 kg.
Breaking point 6/1 with identity labelling, approval number "R" on yellow bottom as foreseen by D.l. 52 dated 03.02.1997.
Complete with liner.
|
|
DROP-BOTTOM SKIP FAP
Complete emptying through base - Best size/capacity ratio -
Two different anti-slip fork-blocking devices - Capacity: 515 to 2075 litres.
Automatically unlocks and tips on contact. Lever for manual tipping.
2 DIFFERENT ANTI-SLIP FORK-BLOCKING DEVICES
|
|
Bottom-dump bucket covered with sheet metal or latticed of capacity 500 to 2000 liters out of standard intended rather for the light loads (plastic, paperboards). Resumption of the bucket by the top by the clamps of forks; Lever of déenclenchement with double locking with latch of safety. FRENCH MANUFACTURE
OPTION: wheels, rings of lifting, limiting device of opening, automatic system of opening, hot galvanization, lid ........
The bottom-dump bucket reduced offers an excellent Qualité/PRIX.Nous report/ratio rather recommend it for the collection of special waste légers.RéalisationS on request.
|
|
Bottom-dump bucket Bucket of the type "BAFO"
Volume from 250 to 3000 liters
Recovery with the forklift truck or pallet truck by the bottom and forklift truck by the clamps on the moulding superior
control of opening per lever with double locking with latch of safety
Options:
wheels, central hook, lid, completion galvanized hot
|
|
CONTAINERS WITH OPENABLE BOTTOM SOLUTIONS WITH 1 DOOR
A complete range specifically designed to collect and dump waste and scraps easily and safely. These containers are emptied automatically from the forklift truck by means of a lever: a solution that minimises operating times and eliminates the risk of accidents that one could meet with using traditional systems. All products in the range comply with the EEC Directive 89/392 and bear the EC mark.
|
|
|
|
|
|
Especially conceived for the collection and the storage of electric and electronic waste.
3 dimensions with the choice: 6,8 or 12 m2; Length 3,4 or 6 meters, Width 2540 mm, height 2600 mm
Tubular structure mechanic welded out of sheet EP 3mm; 2 sliding doors with key closing facilitating the loading or unloading (not of threshold); Sheets of shock protection in bottom of bungalows; Pretégeant Auvende of FRENCH prtection of 200 mm of the intempéries.FABRICATION
OPTION: racks 2 levels out of 1,2 or 3 sides
The Bungalow of storage DEEE of share these dimensions enables you to store all types of electric and electronic waste (large and domestic apparatuses, screens, lamps ......). Indeed these broad opening enable you to store the cumbersome parts. Not having a threshold it will allow you an easy passage of a transpallet, roll, carriage or stake box.
It will protect your products collected from the flight and the bad weather
This bungalow is delivered assembled, it thus immediately operational
|
|
The new HORTO compost bin range is the modern and ecological answer to home composting of selected food and garden waste.
HORTO is designed to contain the natural bacterial activity occurring between the soil and the atmosphere, improving the interactive conditions of decomposition and reducing the time needed to complete the compost process.
This is achieved through thermal insulation, balancing moisture Conservation and temperature through optimum aeration, while providing protection from the weather and UV light.
HORTO TECHNICAL FEATURES:
- 200, 310, 410, 700 and 980 litre models
- 100% post-consumer recycled HDPE
- Sustainable manufacturing with reusable resources
- Aesthetic green colour (variable from recycled items)
- Wide hinged lid
- Total access from all sides
- Ultra sturdy hinges
- Innovative aeration system
- Easy-to assemble structure with instructions, no tools required
|
|
TIPPING SKIP REDUCED-HEIGHT GS
Automatic release - Complete emptying (independent of fill level)
Leakproof bin - Perfect for collecting machine cuttings, scraps, sludge, marc, etc
Capacity: 200 to 1500 litres. Pedestal-mounted models can be used with pallet trucks (under fork pockets).
• Castor-mounted models (forward motion) have 2 fixed + 2 pivoting castors and a handrail.
• Safety chain included.
|
|
Rectangular steel container for temporary storage of fluorescent light tubes and light bulbd. Flap lid.
Forkliftable.
Removable inner Big Bag included.
Exterior corrosion-proof treatment by oil- and acid- proof polyurethane resins, painted in safe visible colours . Safety labelling according in force regulations.
|
|
Vented kitchen caddies of the STELO series are designed to reduce moisture and prevent the build up of anaerobic bacterial activity of the organic waste. Unpleasant odours are avoided and moisture is evaporated by transpiration through the compostable liner and perforated lid, walls and ribbed base.
This kind of bins, combined with a composable/biodegradable bag (Mater-Bi, etc.) allows to reach 4 main targets:
reduces unpleasant smells caused by anaerobic bacterial activity;
Avoids the build up of liquids at the base, through evaporation;
Decreases the weight to be collected, by reducing moisture by up to 30%;
Improves the quality of segregation, collection and the composting process.
|
|
A complete range specifically designed to collect and dump waste and scraps easily and safely. These containers are emptied automatically from the forklift truck by means of a lever: a solution that minimises operating times and eliminates the risk of accidents that one could meet with using traditional systems. All products in the range comply with the EEC Directive 89/392 and bear the EC mark.
|
|
|
|
|
|
5712-06 Recycling Box with Universal Recycle Symbol
For use in areas of high paper generation, such as near copiers, printers and in mailrooms.
Recycling boxes are perfect for curbside recycling programs
Built-in handles for easier lifting and carrying.
Designed to stack or nest.
For use in high-volume paper generations, such as near copiers and printers and in mailrooms.
256R-06 Glutton® Recycling Station
Support your facility's recycling program, help reduce labor costs, and improve worker well-being.
High-capacity, all-in-one centralized solution for efficient waste sortation.
Provided restrictive-opening tops, symbol label pack, and word label pack in three languages provide visual cues and encourage compliance.
Hinged lid allows easy access during emptying.
Custom imprinting available; contact Rubbermaid Customer Service at (800) 347-9800 for details.
Station Includes:
2 Glutton® 56 gallon containers
4 Slim Jim® 23 gallon containers
1 hinged lid frame
8 restrictive-opening tops (4 circles, 2 paper slots, 1 square, 1 triangle)
1 label pack (symbol and word labels in English, French and Spanish)
|
|
CHARACTERISTICS:
Supplied of series with:
- settling tank
- filter sheet for the separation of the liquid and solid substances
- stopper of screw drainage for the liquids
- it rotates antinoise
|
|
A complete range specifically designed to collect and dump waste and scraps easily and safely. These containers are emptied automatically from the forklift truck by means of a lever: a solution that minimises operating times and eliminates the risk of accidents that one could meet with using traditional systems. All products in the range comply with the EEC Directive 89/392 and bear the EC mark.
|
|
Skips and tipping containers from polyethylene (PE) or steel
Due to their low height, compact tipping skips are ideal for use as an auxiliary container to be attached to fork-lift trucks and machinery for example, for the disposal of waste and chippings.
A cable located at the driver’s seat activates the unlocking device and the container then tips forwards
automatically. Subsequently, by lowering the forks the tipping trough is brought back to its loading position.
|
|
AUTO TIPPING SKIP ON CENTRAL PIVOT GIE
Capacity: 480 to 2500 litres.
Versatile - Maneuverable - Front-loading lip - Automatic release
Safety latch for transport (disengage before tipping).
Rubber bumpers dampen end of tipping process.
Automatically unlocks and tips on contact (anti-slip device). Lever for manual tipping.
|
|
AUTOMATIC SKIP GX
Tips and relocks - as forklift mast tilts - Controlled emptying - Automatic release - Capactiy: 300 to 2550 litres. Automatically unlocks and tips on contact (anti-slip device). Lever for manual tipping. Pedestal-mounted models (except the 300L model) can be used with pallet trucks (between fork pockets). Castor-mounted models (forward motion) have 2 fixed castors + 2 castors on a directional drawbar.
|
|
Car-tilting bucket of type "BBA"
For the collection of all your waste
Volume from 250 to 3000 liters
Resumption of the bucket on the 3 dimensioned by forklift truck or pallet truck
Control of opening by a lever has latch of safety
Interlocking of the bucket automatically by simple slope of the chechmate of the forklift truck backwards
Opitions:
Wheels, completion hot galvanization, marking, valve of draining, lid etc....
|
|
The BAB is the ideal piece of equipment on the building site, to be use with a forklift truck.
Especially suitable for moving, storing materials or rubbish, the BAB skip is shock-resistant.
By means of a lever operated system, and by unlocking the skip, the forklift truck operator controls the tipping movement of the skip from his driving position. The skip comes back automatically in locked position after discharging with the reverse lever operation.
|
|
- Robust tack welded steel Construction
- Exists in 2 models: for strong density and average density - Handling by lifting truck
- Double Locking
- E.C. Conforms, validated by an organization of control
Options:
- Wheels for manual displacement
- Galvanization
- Lid
|
|
Inclined bottom bucket, Capacity from 500 to 2500 liters, integral opening of the front face; Carry equipped with 2 jacks to gas maintaining the door in open position; Order lever with double locking with latch of safety; FRENCH MANUFACTURE
OPTION: wheels, lid, hot galvanization, marking.
The tilted bottom bucket is ideal for the paperboard scrap, plastics ..... the emptying of the bucket can be done without the assistance of a lifting truck; Special achievements on request!
|
|
Sartori Ambiente helps you recycle more with the new Urba plus, a new generation of door-to-door collection containers.
2 or 3 containers can be securely stacked in the space of 1,
in a stable tower. Filling is easy with the lid flap, without the need
to move the bins.
The full capacity of the bin can be utilised with improved efficiency,
easy handling and better quality of material segregation.
Urba plus maintains all of the features of other Urba containers, with a front flap and vertical handle with lid locking mechanism.
Technical characteristics:
40 litres
Made of recyclable PP or recycled PP
Stabilised against the effects of UV light
Resistant to chemical detergents and biological matter
Double hinged lid with lid locking mechanism
Double hinged front flap on the lid allows filling when containers are stacked
Ridged lid recess for safe stable stacking
Customizable with hot foil printing
Customizable with IML label
PP recycled content as an option
|
|
AUTO TIPPING SKIP LOW-COST GIO
Low-cost - Load capacity = 800kg - Versatile - Automatic release
Capacity: 685 to 1140 litres. Automatically unlocks and tips by pressure. Lever for manual tipping.
|
|
Waste skips tilting -
Dump trucks of type "VID-BOX"
Volume 600,900 and 1200 liters
For the collection of all types of waste
Use with a device of discharge taken again on the forks of the forklift truck
options:
wheels, lid, complete sealing, double bottom, valve of draining, marking, galvanized hot, etc .......
|
|
CASE HAS WASTE
- Robust tack welded steel Construction
- The use of a swing bar Requires
- Handling by lifting truck or transpallet - Stacking and possible slinging
- E.C. Conforms, validated by an organization of control
Options:
- Wheels for manual displacement
- Galvanization
|
|
Stock batteries SB 60 is a steel receptacle which makes it possible to integrate a polyethylene case of 600 liters for the storage of the worn batteries (60 to 70 batteries). Tubular steel structure; Metal lid rise on 2 compass-gases with handle of opening, lock 2 points and keys. Pastes of fixing on the ground
OPTION: case polyethylene.
SB 60 protects the batteries from the bad weather thanks to its metal lid rise on 2 compass-gases and avoids especially the flight of the batteries since it is equipped with a lock 2 points. it has moreover of the pastes of fixing to avoid any inopportune displacement. Its anti-corrosion completion and painting polyurethane protect it perfectly from the bad weather and rays UV.
|
|
CONTAINERS FOR EXHAUSTED BATTERIES
84/P:
HDPE Container with steel cradle for temporary storage of different waste, assembled and labelled for specific usage. Made of anti-oil and antacid polyethylene, UV treated to permanent exposition to the atmospheric agents, compliant with OSHNER, DIN and AFNOR regulations.
Single mould, reinforced carbon steel cradle allowing the container stacking, lifting, forklifting and tilting.
84/L:
HDPE container for temporary storage of different waste, exhausted batteries, assembled and labelled for specific usage. Protection cradle entirely made of WATERTIGHT steel.
Personal safety and antipollution labelling in compliance with national and community laws.
|
|
|
|
|
|
From an idea to a container-system
In recent years things have changed greatly in the waste-disposal sector. Less waste is disposed and more is recycled. However recycling only makes sense from an economic and ecological point of view if the substances to be recycled are available in large and – more important - unmixed quantities. This demands the job of sorting out the waste from the individual valuable substances and placing them in special containers, which should be done directly on location. That is exactly where KLIKO containers come into their own. Container systems for dealing with waste in all sectors whether centrally or on location – no matter whether the materials are to be recycled or disposed of.
A wide range of two- and four-wheeled containers of various capacities are available to our customers.
To maintain Craemer's stringent standards, only high quality material is used for the production, whether plastics or metal.
Craemer provides a complete range of different containers for a variety of disposal systems.
The high quality of our wastebin system confirms the certification according to DIN EN 840 considering as example of our "MGB"-line.
|
|
|
|
|
|
Weber products:
Pre-sorting containers, large refuse containers, waste collection containers, refuse baskets, waste bins and mobile waste disposal containers etc.
Are suitable for various types of selective waste disposal such as paper, glass, packaging etc.
All Weber products are produced on our company premises in Haan, near Düsseldorf off our own tools using the compact injection moulding technique and in compliance with DIN 30740 / EN 840.
The containers comply with the noise protection ordinance according to the EU Directive and bear the guaranteed acoustic power (CE) mark.
All products are manufactured exclusively from new basic materials (certified 1a type goods) and are resistant to UV, cold, heat and chemicals.
The high quality standard of our products, our extensive capacities, exact scheduling and reliable service are the basis for the successful development of our company - as well as ensuring satisfied customers.
Waste containers, 1100 litres -round lid
Waste containers, 1100 litres -flat lid
Waste containers, 1000 litres -
Waste containers, 770 litres
Waste containers, 660 litres
Waste containers, 360 litres
Waste containers, 240 litres
Waste containers, 140 litres
Waste containers, 120 litres
Waste containers, 80 litres
Waste containers, 60 litres
Waste containers, 50 litres
Pre-sorting waste containers 18 litres
Pre-sorting waste containers 10 litres
|
|
|
|
Waste storage: containers, skips...
