|
|
Customers from municipalities to beverage producers, from semiconductor manufacturers to general manufacturers, use industry-leading ozone systems from GE Water & Process Technologies to disinfect and oxidize contaminants in water for a range of applications.
With GE, you get ozone generation equipment that provides superior system design, reliable disinfection and oxidation qualities without having to handle, store or dispose of toxic chemicals. Ozone is far more effective than chlorine for killing bacteria and algae and inactivating viruses and protozoa, such as Cryptosporidium and Giardia.
|
|
The process is based on the patented and well-proven MinoxTM process. The process has been in use for offshore applications since 1991 and has now been introduced to the conventional industry with low capacity units.
The MinoxTM process gives small, compact and economical systems, also for this application. The most common industrial application for the conventional industry is Deoxygenation of water in cooling circuits, district heat plants etc.
|
|
Rsler Process Water Recycling Systems can be connected to virtually any vibratory finishing machine. This increases the savings potential of vibratory finishing. Most vibratory finishing processes such as de-burring, precision grinding, rough grinding, radiussing or polishing are wet processes. Water and cleaning agents (compounds) are the carriers for resultant removal of media and metal fines.
The resultant process water is completely recycled via a closed-loop system . Water and compound savings contribute to significant cost reductions . The system technology is based on special centrifugal technology with an acceleration factor of up to 2000 g, coupled with environmentally-friendly chemistry developed in-house.
Rsler Process-Water Circulation Systems can be adapted to any vibratory finishing application. Semi- and fully-automatic centrifugal systems are available.
Rosler centrifuges are the most popular waste water treatment systems in the world.
|
|
|
Our MFS series cooling and process water sand filters are designed to improve the efficiencies and extend the life of water cooled HVAC systems. Our filters provide a proven method for removing suspended solids in recirculating water systems. MFS filters enhance all treatment programs by reducing maintenance and downtime. Including our filtration in your process and cooling systems will facilitate energy and water savings, enabling you to achieve todays Cleantech standards.
|
|
Protection of domestic hot and cold water networks from the risks of Legionella, Pseudomonas and other bacteria by means of continuous preventive heat treatment of the domestic water.
Instant production of hot and cold domestic hot water.
6 models
Processed water flow up to 9.5 m3/h.
Max pressure for primary/domestic circuit: 9B/7B.
Primary supply: 85C min.
|
|
|
|
|
|
Reverse osmosis is a water treatment technique that allows to produce large quantities of demin water in a constant and reliable manner.
How does reverse osmosis work?
A reverse osmosis installation produces pressure on an aqueous solution, which is in contact with a semipermeable membrane. This pressure is larger than and opposite to the osmotic pressure. Because of this pressure, water permeates through the membrane (cfr. diagram). The main part of the solutions substances are stopped by the semipermeable membrane.
Reverse osmosis is a physical process requiring no chemical products. Thanks to the modern membranes up to 99.6% of the dissolved substances is eliminated without regular interruptions for cleaning or maintenance.
The permeate contains almost no more dissolved substances. Without a reverse osmosis installation, these particles can lead to a production interruption (or in any case to a less efficient production).
A reverse osmosis appliance eliminates almost all:
* Mineral salts
* Heavy metals
* Bacteria, viruses and pyrogenic
|
|
GrahamTek designs and build conventional 8" Reverse Osmosis systems for medium and small applications, using proven pressure Vessels from International suppliers like CodeLine with side port configuration.
In certain designs with the 8" type RO, GrahamTek also manufactures its own patented Pressure Vessels with integrated Electro Magnetic Device. These systems are mainly installed for medium and small Seawater and Brackish water plants.
|
|
Reverse Osmosis System GENO-OSMO Type MSR
- Compact system for trade and industry
- Eight different sizes available, from 125 l/h up to 2,000 l/h
- MSR-tronic controller with graphical display to visualize and trigger the
water softeners type duo WE-MSR, the reverse osmosis and the permeate
tank with pressure booster pump
- Combi-cap pressure vessel for optimum flow distribution on the membrane
elements; quick-acting plug-in couplings for single, series and block
mounting; easy increase of the permeate capacity by quick installation of an
additional pressure vessel
|
|
A self-cleaning, skid-mounted system that extends membrane life and maximizes performance. Integral pump-in-tube design combines high output with quiet operation.
Pump-in-tube design offers warming of feed water to improve system performance and reduce both sound and footprint
Electronic command center makes operation easy and precise
Pump protection shuts off system when pressure is too low
Panel-mounted gauges and flow meter provide convenient and accurate readings
Digital conductivity display provides accurate permeate water quality
EverClean Rinse cleans system membranes with high-quality reverse osmosis water, to extend membrane life and improve water quality
|
|
Koch Membrane Systems, Inc., Introduces The World's Largest Reverse Osmosis Element
Element Diameter: 18" (457.2 mm)
Element Length: 61" (1549 mm)
Designed By KMS Especially For Advanced:
Brackish Water Treatment
Municipal Water Reuse
Seawater Desalination
A Tremendous RO Element With Tremendous Benefits! Reduces Total Capital Costs
Reduces Civil Costs
Reduces Plant Floorspace Requirements
Reduces Construction/Installation Time And Costs
Reduces Operational And Maintenance Costs
|
|
|
|
|
|
Reverse Osmosis (RO) is a process that uses pressure applied through a membrane barrier to remove dissolved solids from a liquid. The RO process uses cross-flow filtration as compared to depth filtration. The former has three streams while the latter two. In RO the feed flows tangentially over a membrane surface and separates into permeate and concentrate. The concentrate is normally wasted except when energy recovery is viable in which case the high pressure of the concentrate is used to reduce overall power consumption before disposal.
The PACT RO normally uses a thin film composite membrane wound in a spiral configuration. The standard PACT RO package is a skid-mounted unit that includes a cartridge filter; high pressure pump; membrane cleaning pump; membrane housings (pressure vessels); membrane elements; instrumentation for flow/pressure/temperature and conductivity; PLC-based control panel and; interconnecting piping, fittings, valves and electric wiring within the confines of the skid. As standard piping used on the high pressure side (feed and concentrate) is 316 stainless steel and on the low pressure side (product) is schedule 80 PVC. However, its client's option to request that all piping on the RO skid be 316 s/s or higher alloy steel.
|
|
Reverse osmosis (RO) is used to reduce dissolved solids from feed waters with salinities up to 45,000 ppm TDS (total dissolved solids). Municipalities and industrial facilities are able to use RO permeate as a consistently pure drinking water supply and to transform drinking water to high purity water for industrial use at microelectronics, food and beverage, power, and pharmaceutical facilities. The technology is also very effective at removing bacteria, pyrogens, and organic contaminants.
Reverse osmosis separation technology is used to remove dissolved impurities from water through the use of a semi-permeable membrane. RO involves the reversal of flow through a membrane from a high salinity, or concentrated, solution to the high purity, or "permeate", stream on the opposite side of the membrane. Pressure is used as the driving force for the separation. The applied pressure (P) must be in excess of the osmotic pressure of the dissolved contaminants to allow flow across the membrane.
|
|
|
|
|
|
BONO ARTES developed a innovative solution that matches gravity filtration with self-cleaning operation. The result is a very simple unit with high filtration efficiency and low installation costs that is particularly suitable for cooling water filtration where very large capacities are concerned.
Filtration of raw water is operated by gravity. The operating principle is the hydrostatic level of the water up to the sand layer. The unit is provided with three chambers: one contains the filtration media, one filtered water and another is used for the separation between the filling media and the clarified water storage. Filtered water here contained is used to backwash the filter when the pressure drop reaches the set-point value. Unlike pressure-operated filters requiring pumps and blowers, backwashing is done by gravity and no rotating machinery, spare parts and control equipment (automatic valves, flow-meter, regulating instruments, control panels etc.) are required . Moreover the filter is operated without any supervising personnel.
The benefits of such applications lay in the efficient filtration process, very low operating costs and the advantage of being able to treat large flows of water.
|
|
USA manufactured, Finish Thompson Distillation Systems for solvent recycling incorporate superior technology and design to recycle almost any solvent for reuse. This solvent distillation equipment has a proven track record. Thousands of satisfied customers use these solvent recyclers to successfully recycle millions of gallons of waste solvent on site each year.
Finish Thompson was a pioneer in the design and technology development of on site solvent distillation. FTI's batch distillation systems achieved patent status and received certification from independent testing agencies. Nearly 30 years of manufacturing experience in this industry earned FTI an international reputation as an expert in the design, manufacture, and application of solvent distillation/solvent recycling technology. FTI solvent recyclers carry a 3-year warranty along with a lifetime warranty on the heater unit.
|
|
Air Diffuser Tube
Ideal for:
* Oxygen supply for fish breeding
*Waste water treatment
*Aquaculture aeration
*Liquid agitation and mixing
*Oxygen supply for Ponds and lakes
|
|
Description
AJ submerged aerators are an extremely flexible and versatile airing system for the treatment of waste-water and in every case air/water mixing is required . Elevated oxygen transfer values, low noise levels, increased reliability, low cost and rapidity of installation are just some of the advantages that our AJ submerged aerators offer.
Applications
These aerators are frequently used in waste water treatment plants, especially during homogenisation and equalisation, pre-airing stages, biological oxidation, oxidation-nitrfication, sludge stabilisation and post-airing stages.
AJ radial submerged aerators can be utilised for the flotation of greases, oils and solids, at the relevant stages of flotation. This clearly means that they can be utilised during neutralization stages or in airing with high levels of oxigen. Re-circulation of the mixed air and water in the tank is carried out by two different movements: the principal or primary movement (Mp) and the induced one.
|
|
In the majority of the applications of vibro-abrasion the recycling of the water of treatment is possible. Two advantages with recycling economy and respect of the environment!
To recycle the effluents of the machines of vibro-abrasion makes it possible to save not only water but also the additive. The costs of destruction of emitted muds are also reduced.
Two methods are used recycling by centrifugation or flocculation.
In the case of impossibility of recycling by centrifugation we propose a broad range of physicochemical station of water treatment: us to consult
|
|
R2DX RANGE
For small space install Treated flow rate from 4 m3/h to 46 m3/h
Low pressure lamps
Meets the most strict standards of dimensioning and design for a complete disinfection of the water intended for human consumption (according to the Ministrielle circular of the Health of January 19, 1987)
|
|
FZI RANGE
Used from 300 l/h to 200 m3/h Suitable for various applications
Low pressure lamps
Meets the most strict standards of dimensioning and design for a complete disinfection of the water intended for human consumption (according to the Ministrielle circular of the Health of January 19, 1987)
|
|
FTA
Collective and industrial application product
Design to admit 7 m3/h to 1000 m3/h flow rate
Amalgam low pressure lamps
Many possible implementations
|
|
|
|
|
|
Novatecs production includes a wide range of standard installations.
Cleaning and Drying Systems: ultrasonic cleaning and rinsing both standard and according to the customers specific requests. Modular surface treatment systems for immersion and/or spray treatment with single or cascading stages. Hot air dryers, infra-red and vacuum dryers, centrifugal dryers. Solvent dryers, ultrasonic degreasing machines, spray-cleaning machines. Compact ultrasonic cleaning Tanks for laboratory or research applications.
Ultrasonics: piezoelectric and magnetostrictive ultrasonic generators, flanged or bulkhead mount submersible transducers. Available work frequencies from 18 to 100 kHz. Modular construction of the piezoelectric units allow to supply a generator also with different frequencies.
Automation: 2 or 3 axes handling systems with load capacity up to 1000 kg.
Air and Water treatment: water softeners, reverse osmosis, active carbon water filtration systems and manual or automatic water demineralising systems, ultra-filtration systems and evaporators under vacuum which allow to work environment-friendly. Extraction, filtration and air treatment systems (powders and vapours), clean rooms.
Painting: manual or automatic water veil or dry cabins, pre-drying modules and dryers.
NDT: Automatic FPI Dye-Pen, wash and developer systems.
|
|
TB-200X4T
Breezy Bud, Inc. has devoted itself since its founding to manufacturing high quality industrial blowers and fans. Our customers appreciate our dedication to working with them to produce a blower that meets their requirements.
Our blowers are engineered to run continuously trouble-free. Our blowers have a number of features that contribute to our blower's efficiency and long operating life. Some of these features include high quality materials expertly assembled, ease-of-maintenance, low vibration, and low noise operation. Listed below are some of the types of blowers that we manufacture:
-Casting Multi-Stage Centrifugal Blower
-Casting Single-Stage Centrifugal Blower
-Clean Room Fan
-Conveyor Blower
-Corrosion Resistance Blower (Titanium, Hastelloy, etc)
-Cutter and Trim Blower
-Gas-Tight Booster (1~15kg/cm2G, depend on system required.)
-Gas-Tight Blower
-High Temperature Resistance Blower 900
-Spark Resistance Blower
-Wear Resistance Blower
|
|
|
GrahamTek Systems is fully geared for the global drive to reclaim water rather than over harvesting our natural recourses. To this end we have designed cutting edge technology which treats secondary effluent to planned indirect potable standards.
|
|
The Graver Lamella design assures laminar flow conditions that result in hydraulic uniformity and high effluent quality. It permits great reduction in the space needed for clarification equipment, and allows the compact equipment to be located indoors if desired, or to be easily relocated at a later date. It also makes point-source treatment not only feasible, but logical for many applications.
A lamella is a piece of equipment that utilizes inclined plate clarification sedimentation to separate solids from the water and clarify the water. The lamella is composed of a series of removable parallel plates commonly referred to as "lamella plates".
|
|
Waste water, sanitary and sewage treatment
Waste water , sanitary and sewage treatment tank called T.E.I.
The T.E.I is designed as package compact, modular and easily movable, used for industrial or sewage water treatment.
The T.E.I is very simple to install, start and operate:
Few civil work required
Erection and start-up taking less than a week, the T.E.I reduces costs compared with conventional systems.
The stainless steel construction makes the T.E.I a durable installation.
Designed as a self operating unit, the T.E.I is very suitable for emergency situation.
|
|
KONSOLIDATOR Family of Tubular Systems provide everything you need to process industrial wastewater. Whether the stream is 5,000 gallons or 500,000 gallons per day, there is a KONSOLIDATOR System that will plug in and solve your wastewater needs:
Accommodate higher solids concentration
materials via large open flow channel
membrane
Resist plugging from fibers and bulky
materials and high solids concentrate
Mechanically clean with spongeballs
(with FEG PLUS membranes)
Tolerate system upsets
Designed for high strength, heavy duty
industrial applications
Includes all components needed for reliable
wastewater processing
|
|
Stuart Water Distillation apparatus, A4000, D4000, W4000
There are 3 levels of specification to choose from in the Stuart water still range:
Aquatron
Fully automatic, borosilicate glass stills with silica sheathed heaters. Available with outputs of 4 or 8 litres/hr single distilled or a double unit producing 4 litres/hr of double distilled water. Capable of being converted to pre-treated feed to remove the need for descaling.
Distinction
Economical borosilicate glass still with silica sheathed heater. Produces 4 litres/hr single distilled water. A safety device is included which turns off the heater and prevents overflow when the collecting reservoir is full.
Merit
A simple glass water still with long life metal heater and twin safety thermostats. Ideal for schools and colleges.
|
|
water distillation machine
WFI production characteristics in compliance with present USP norms
Wide range of units consisting of two, three, four, five or six stages with production capacity from 25 litres/h to 6000 litres/h.
Production of distilled water at 98 C for correct storage
Highly reliable.
PLC-controlled easy operation.
High-efficiency anti-entrainment system.
Absence of rotary organs.
Models operating either by electric or steam heating
Wide range of optional items to personalize the unit according to customer%u2019s needs and specifications.
|
|
DW SERIES WATER DISTILLERS
* vacuum distiller for water solutions
* water evaporator heating: heat pump
* continuous distillation with automatic waste discharge
* water distiller yield 7 /30/100/200 l/h
* ROTATING BLADE SCRAPER to limit residues
* exhausted water solution recovery by distillation, water recycling in other washings
* thanks to water depuration by distillation, waste solutions are reduced to a minimum
|
|
|
|
Water treatment machines : softeners, osmosis filters, deionisers...
