|
|
- Filter unit for Bran+Luebbe On-line Monitors
- For municipal and industrial waste water treatment plants
The UltraFiltration unit provides a clean sample stream for on-line monitors and is specially designed for difficult samples such as waste water with a high content of solids or bacteria.
|
|
WINNI-mat VGX
- Compact single system
- For homes of up to 8 families
- Volume-controlled
- Economy salting
- Disinfection device
- Blending device
- Connection of an external dosing unit possible
- Electronics component with symbols shown in the display
|
|
The only multi-port commercial valve that uses countercurrent, soft water regeneration right out of the box. Powered by Kinetico's breakthrough lightweight 2%u2033multiport Hydrus™ valve, the Hydrus Series uses up to 40 percent less salt and reduces wastewater by up to 30 percent.
- Simple operation for ease of use
- Modularly expandable, allowing for additional tanks to meet future increased flow requirements
- Elite Smart Start, the most advanced controller on the market today
- High-flow distributors provide minimal pressure loss
- Dual-layer under-bedding improves water distribution, increases salt and -water efficiency, and reduces pressure loss
- Only multi-tank softener system certified to NSF-44 standards
|
|
Res-Kem is a leading manufacturer of industrial water softeners, including various standard and customized systems. Zeo-Tech pre-engineered steel tank valve nest systems for large industrial and municipal applications, non-conventional packed bed systems for critical industrial customers and condensate polishers for industrial boiler water.
- pre-engineered diaphragm valve nest units designed for a variety of applications, ideal for single unit flow rates up to 925 gpm and vitually unlimited flow rates with multiple units.
- Economical and efficient, Res-Kem softeners can be equipped to operate manually, semi or fully-automatically. Regardless of the set up, only limited technical expertise is required for operation.
|
|
A range of compact automatic water softeners to remove hardness and prevent formation of scale deposits.
Process description
Feedwater enters the unit and passes through the ion exchange resin which causes the replacement of calcium and magnesium with sodium to give soft water. Periodically, the exchanged calcium and magnesium are removed from the resin by regeneration using salt solution from the salt container. The regeneration process is fully automatic
Features
- Four standard sizes.
- Simple operation.
- Automatic regeneration.
- Timer control.
- Aesthetic cabinet.
- Integral salt saturator.
- Full after sales support
|
|
Purite offer a range designed for the topping up of lead acid batteries. They can be attached directly to a mains supply and in some cases can be wall mounted.
These systems produce battery water direct from the mains in accordance with BS3974 Grade A water for lead acid batteries. They are easy to install and are wall mounted to maximise the use of space. The cartridges have a colour change window indicating when the cartridge requires changing.
Two versions are available:
BWDS 3 Series - to supply high quality purified water for up to 10 lead acid batteries
BWDS 7 Series - to supply high quality purified water for up to 20 lead acid batteries
A dispensing gun is also available for use with the BWDS range.
This blue dispensing gun has a manual dispense via a 6mm spout.
|
|
|
Chlorine and chlorine coumpounds have been used successfully in water treatment for many decades. Lutz-Jesco offers you an extensive range of wellestablished equipment as well as of state-of-the-art chlorination systems for dosing chlorine gas and chlorine compounds. Chlorinator, analyzing and warning devices match perfectly. All Lutz-Jesco chlorination units meet the safety requirements according to German standard DIN 19606 by full vacuum technology, mostly full vacuum starting at the chlorine tank.
|
|
|
|
|
|
ProMinent Chlorine dioxide is an extremely reactive gas, which – because of its instability – cannot be stored, and must only be produced in the required quantities in special plants on the site where it is to be used. Chlorine dioxide offers a number of advantages for water disinfection compared with chlorine, the disinfectant mainly used
Advantages of chlorine dioxide, particularly compared to chlorine
* Disinfection power is independent of pH.
* High residual effect thanks to long-term stability in the pipeline system, thus microbiological protection for many hours to days
* Reduction of the biofilm in pipelines and tanks, hence reliable protection of entire water systems against legionella contamination.
* No reaction with ammonia or ammonium, thus full disinfection power of chlorine dioxide.
* No formation of chorophenols and other intense odour compounds which can be produced in water chlorination.
* No formation of THMs and other chlorinated hydrocarbons, no increase in the AOX value.
|
|
Barnstead Water Purification Systems
We offer the market's most complete line of water systems, providing scientists with high purity water for analytical, bioresearch and life science applications. We are water experts, manufacturing water purification products for deionization, distillation, filtration and reverse osmosis.
|
|
|
Barnstead, the Water Experts. Manufacturers of the most complete line of water purification products including deionization, distillation, filtration and reverse osmosis.
|
|
The Graver Lamella design assures laminar flow conditions that result in hydraulic uniformity and high effluent quality. It permits great reduction in the space needed for clarification equipment, and allows the compact equipment to be located indoors if desired, or to be easily relocated at a later date. It also makes point-source treatment not only feasible, but logical for many applications.
A lamella is a piece of equipment that utilizes inclined plate clarification sedimentation to separate solids from the water and clarify the water. The lamella is composed of a series of removable parallel plates commonly referred to as "lamella plates".
|
|
BS EN ISO 3696 Grades I-III
Purite offer a wide range of products to economically produce all types of purified water to a wide range of quality and volume requirements.
Technologies / Processes:
Ion Exchange: Demineralisation, Softening / Organic Scavenging
Membrane Deionisation: Reverse Osmosis, Continuous Electro-Deionisation (CEDi)
Filtration: Carbon Filtration, Physical Filtration, Ultrafiltration
Oxidation / Disinfection: Ultraviolet, Chemical, Heat
|
|
|
The Electric H2O media filtration system is designed to economically improve the efficiencies of water cooled HVAC systems. This filter will remove suspended solids to 5 microns nominally from your system. Media filtration will extend the life and improve the operating efficiencies of your cooling towers, chiller condensers and heat exchangers. Our system complements your chemical treatment program by removing suspended contaminants. A proactive water treatment program that includes our filtration can provide a significant return on your investment.
|
|
|
|
|
|
CTV-F2
Cooling Tower Vacuum Filter
Overview
The CTV-F2 Filtration System is specifically designed to work with Goodway's popular
CTV-1500 Cooling Tower Vacuum. In situations where the cooling tower water needs to be cleaned, filtered and returned to the basin, using the CTV-F2 in conjunction with the
CTV-1500 is the only way to go. This carefully engineered unit can handle the high flow and small micron filtration requirements typically encountered when cleaning cooling towers. A pair of reusable filter cartridges allows the operator to clean cooling tower water down to 5 microns. With quick lock lids, filters can be changed out in a matter of seconds. The integrated dolly enables the user to conveniently place the filters, with the Cooling Tower Vacuum, alongside the basin. Clean, filtered water can then discharged back into the tower basin at up to 50 gallons per minute.
Specs
Input Water Pressure: Maximum 30 PSI
at 50 GPM
Filters: Two reusable synthetic,
40 square foot, 5 and 60 micron media
Dimensions: 38" high x 20" wide x 20" deep Weight: 70 lbs net dry
|
|
The PE devices were first sold commercially in 1998. The all-ceramic moving and mating parts of the PE have shown exceptionally low, and even zero wear in high-pressure SWRO brine applications and the material is not susceptible to the pitting and stress corrosion of steel and bronze components in similar applications. The slow rotating PE (1,500 RPM) has proven to be a low maintenance component in commercial desalination plants.
Since the PE transfers energy directly from the brine to the feed without high speed rotating shaft inefficiencies, the PE achieves actual efficiencies of 91 to 95 percent within a broad flow range.
Reduced energy and capital costs mean that for the first time ever it is possible to produce potable water from seawater at a cost below $1 per cubic meter in many locations worldwide.
|
|
five-stage water processing system that offers high-purity water through carbon filtration, softening, reverse osmosis, deionization and ultraviolet sterilization. Complete skid-mounted package provides for daily volumes up to 8,000 gpd.
- Skid-mounted, space saving design allows for easy and trouble-free installation
- Modular configuration can be easily customized for a given application
- Automatic low pressure shut-off protects system by shutting down the pump when line pressure is inadequate
- EverClean® Rinse cleans system membranes with high-quality reverse osmosis water to extend membrane life and improve water quality
- Storage and repressurization systems increase reserve capacity of system
|
|
Sterling, the first name in modern temperature control.
Sterling brings a reputation of quality and unmatched reliability. As the industry leader, we provide the broadest line of Water Temperature Control Systems and Oil-Circulating High Temperature Control Systems.
Sterling also offers a complete line of Air-and-Water Cooled Chillers. This line includes: portable units with 1/2 to 40 ton capacities; central chilling stations with capacities up to 180 tons; full-size cooling towers with capacities to 700 tons; and epoxy-coated pump tanks to 5,000 gallons.
|
|
Innovation, and invention makes us at GrahamTek Systems a leader in Desalination system design.
The AquaDelfi Water treatment system will be the answer to any rural area without proper infrastructure, or clean drinking water.
Farmers with boreholes, abandoned due to brackish water problems need not to search for expensive alternatives any longer.
Seawater AquaDelfi in production!
Operating Current: 220-380V
Feed TDS: Up to 39000ppm
Product TDS 330ppm
|
|
Industrial drinking water treatment station
Integrated filters on install plate
From 200 l/h to 12 m3/h Flow rate
Low maintenance and easy to fit Strong and reliable unit
|
|
|
|
|
|
Drinking water treatment – take water quality into your own hands.Tried and tested in long-term operation: With Kärcher you can get high-quality drinking water from all fresh water and salt water sources. In this way we ensure reliable water quality in hotels, camping sites, farms and industrial premises.
WPC 100
Up to 2,400 l every day: The Kärcher water treatment system WPC 100 transfoms surface water and raw water from the tap into high-quality drinking water.
WPC 600
Up to 15,000 l drinking water per day: The WPC 600 means high quality. Unlike the WPC 100, this system can even run with brackish water or salt water.
WPC 2500
Up to 60,000 l every day: Kärcher's WPC 2500 system is made for turning brackish water or sea water into larger amounts of drinking water.
WPC 5000
Up to 120,000 l every day: The WPC 5000 makes large amounts of drinking water out of tap water, surface water, and ground water as well as very salty brackish water and sea water.
WPC 10000
The largest Kärcher water treatment system provides up to 240.000 l of drinking water per day. It can be used with raw water of all types as well as salty brackish water and sea water.
|
|
Customers who need ultrapure water rely on electrodeionization (EDI) from GE Water & Process Technologies. Our EDI system provides key advantages over traditional ion-exchange processes:
- Eliminating expensive and hazardous chemicals used in ion-exchange resin regeneration.
- Reducing energy and operating expenses
- Reducing the facility size requirement
- Helping plants meet ISO 14000 requirements
EDI systems from GE cover many applications including power generation, microelectronics, food and beverage production, and chemical and pharmaceutical manufacturing. Using high-capacity ion exchange membranes, our EDI system removes not only residual salts but also ionizible aqueous species such as carbon dioxide, silica, ammonia and boron.
|
|
Implementation of the PURON® Technology: Submerged Hollow Fiber Modules
In a commercial system the individual fiber bundles are connected in rows. Several of these rows are mounted in a stainless steel frame forming a membrane module. The PURON® module is available in standard sizes of 1500, 500 and 250 square meters of membrane area. The design of the PURON® module was specially developed to meet the extremely tough requirements of a membrane bioreactor (MBR) when utilized in wastewater treatment.
|
|
The PACT package sewage treatment systems have been designed for useing in areas not connected to a central sewerage system, such as Hotel, Airport, Cantonment, etc. To meet various request PACT provides three different type of packages:
• Conventional biological treatment package
• Membrane Biological Reactor (MBR) package
• Moving Bed Bio-film Reactor (MBBR) package
Standard Components (common to the three Series)
• Tanks for aeration, settling and chlorine contact
• Roots type blowers complete with motor, silencer, flexible fittings and baseplate
• Air-piping and fine-bubble diffusers. Diffusers are removable for easy maintenance
• Sludge air-lift pump (recycling and waste)
• Disinfection equipment
• Interconnecting piping and fittings
• Electric control panel
• Packaged magnesium anodes for cathodic protection of steel tanks
• Ladders and walkway for above grade tanks
|
|
With the new MF series OTEC offers a real alternative to expensive microfiltration plants and centrifuges, which have a large footprint and large power consumption with less than desirable performance. The compact microfiltration units of the MF series clean waste water, using their specially designed filter system which allows the system to be run as a closed loop system. All of this, with a relatively low purchase price and very low operating costs.
User advantages
• Very small footprint
• Low purchase and operating costs
• Savings in water and compound consumption
• Additional savings through an easy method of
precious metal recovery
|
|
GrahamTek Memspin Range provides Fine & Ultra Fine Filtration for the removal of finely dispersed suspended and sub-micron particles without the use of any foreign chemicals. Memspin systems may be configured as pre-filtration or Fine Filtration processes for Reverse Osmosis Desalination for the treatment of high- and low- turbidity Sea, Brackish and Hard Waters including Industrial Waste, Commercially Recycled Waters and Municipal Waste Waters.
The unique flow reversal feature together with a pneumatically enhanced hydraulic backwash (reverse fed) enables application specific alternating cross-flow and dead end operation.
|
|
|
|
|
|
Swimming Pool Water Filtration & Ozonation Plant
Unique Features Of Swimming Pool Ozone Technology
It makes pool water very safe for swimmers & especially children. Research shows that most people & children intake around 100 – 300 ml of water, while swimming.
The technology used to make swimmers free from skin rashes, eye rending, hair fall, cloudy appearance of the pool water, foul & chemical odor.
Swimming pool ozone treatment is as per international parameters & endorsed by all international standards.
As compared to chlorine ozone is 1.33 times more powerful & 3100 times more faster in disinfecting water.
Swimming pool water is treated for turbidity, micro particles, micro-organisms, colour, odor, sweat, urine, body oil, swimmers body infections, bird droppings, algae, etc.
The treatment scheme involves – I level of disinfections in balancing tank with ozone contactor, micro flocculation using poly-electrolyte dozing with ozone, vertical in line re-circulation pumps, multi grade pressure sand filter, side stream or main stream ventury ozone injection with ozone mixing tank, residual ozone destruction, ph correction.
|
|
OZONE WASTE WATER TREATMENT
Ozonation has recently gained popularity as a wastewater treatment alternative in the United States after regulatory agencies placed restrictions on chlorine treatment induced disinfections byproducts, especially levels of trihalomethane (THM). Ozonation is an established and proven disinfections alternative as well as a peroxidant for the control of THM precursors.
Benefits of Ozonation
Oxidation and volatilization of organics,
Control of algae and associated compounds,
Destabilization (micro-flocculation) of certain types of turbidity,
Removal of color-causing compounds,
Oxidation of iron and manganese,
Very short disinfection times, and
Partial oxidation of organics for subsequent removal by microorganisms.
|
|
|
The Horizon Series integrated ozone systems eliminate the complexity of integrating the four critical elements of ozone systems: feed gas preparation/oxygen concentration, ozone generation, mass transfer, and complete process control. All Horizon Series seamlessly combine these elements into stainless steel skid-based packages designed to address an array of industrial applications.
|
|
PC Series: Easy and cost effective portable ozone systems
The portable PC Series ozone systems incorporate Pacific Ozone high concentration ozone/oxygen generation systems with onboard pump, compressor, and mass transfer system in a rugged, all-stainless steel package. Simply connect plant water in and get high concentration ozonated water out with no loss of flow or pressure. The PC Series systems are ideal for barrel washing, tank sanitization, surface disinfection, and other point-of-use applications.
|
|
Customers from municipalities to beverage producers, from semiconductor manufacturers to general manufacturers, use industry-leading ozone systems from GE Water & Process Technologies to disinfect and oxidize contaminants in water for a range of applications.
With GE, you get ozone generation equipment that provides superior system design, reliable disinfection and oxidation qualities without having to handle, store or dispose of toxic chemicals. Ozone is far more effective than chlorine for killing bacteria and algae and inactivating viruses and protozoa, such as Cryptosporidium and Giardia.
|
|
|
|
Water treatment machines : softeners, osmosis filters, deionisers...
