|
|
Based on a unique process which provides exceptional pressure, capable of removing the largest particles from the most inaccessible places.
Fitted with an adjustable spraygun for flow control.
Helps to eliminate all types of fault.
For speeding up solvent drying time and for getting rid of humidity.
A product which has an essential part of electronic, aeronautic, telephony, optical, photography, cinema and laboratory maintenance applications.
Non abrasive, 99.9% dry and pure.
|
|
High Powered Airduster
Ref: GDP400
High powered, cost effective airduster
Powerful initial blast with minimal drop off
Non-flammable, pure compressed gas
Use to remove dust and dirt from delicate and inaccessible areas
Use in short, sharp bursts to avoid can frosting
|
|
Twice the spray power of typical dusters
Superior cleaning ability
Excellent for cleaning delicate parts
and electronic components in hard to
reach areas
Nonflammable
Safe on plastics
No residue
Moisture free
Nonabrasive
Odorless
VOC Free
|
|
|
|
|
|
GRAY ANTICO
Rust-proof primary education with fast covering of gray color (RAL 7040) prepares the support before finish-up paint.
Effective anti-corrosive agent, it is applicable on any form of mediums, even on rusted surfaces. Extremely resistant and adapted to the clear finish-up paints.
Aerosol 650ml. Réf.005871. Exist in red (RAL 3009).
CUIVRO JELT
Coating of protection containing very pure copper powder. Form a flexible and resistant film. Facilitate thermoelectric welding. High conductivity. Good behavior with corrosion and the stripe. Protect the elements of body, metal frames, pipings, drains, boilers, medical, plumbing, boiler making. Drying in 30 minutes. Esthetic completion.
Aerosol 650ml. Réf.005881.
GALVINOX
Powerful agent of protection containing synthetic resin and iron oxide. Form a flexible film equipped with an excellent anti-corrosive resistance and a great durability. It makes it possible to protect the various elements from body (sheets) against the external aggressions. Ideal to cover the turned blue weldings of the stainless steel or to improve any steel part.
Aerosol 650ml. Réf.005891.
VARNISHED PROTECTION METAL
Transparent protection long life which is appropriate for metals. Very great abrasive resistant and with the difficult climates. Form a hard film and anti-humidity and anti-corrosive brilliance. Fast drying. Aerosol 650ml. Réf.005921.
|
|
It is well known that slips, trips and falls are the most common causes of over 3 day accidents in many industries. Stairways, ladders, ramps, shower and dressing rooms are all potential areas of risk. This results in painful falls and accidents that account for operating costs amounting to € millions for injury damages and accidents at work.
Many of these risks can be prevented by implementing durable antislip surfacing. Antislip surfaces reduce slip trip and fall accident rates helping keep down compensation claims and insurance premiums.
All Antislip surfacing is durable, versatile and have been developed to provide effective, consistent and repeatable high performance levels over a long in service life.
|
|
Safe Step 100
- Easy to use, single pack product
- A high performance, single pack epoxy ester anti-slip coating suitable for heavy pedestrian traffic
- Resistant to most oils, acids, alkalis and solvents
- Suitable for interior and exterior applications
- Ideal for use on ramps, steps and work platforms
- Available in grey, tile red and safety yellow
- Coverage: 3.7m² per pack (roller applied)
|
|
General Purpose Anti Static Wipes
Ref: GAS100
General purpose, light duty anti-static treatment for use on non-porous surfaces
Protects against damage and destruction caused by static discharge
Effective at humidity levels as low as 3%
Does not degrade under thermal cycling
General Purpose Anti Static Treatment
Ref: GAS
General purpose, light duty anti-static treatment for use on non-porous surfaces
Protects against damage and destruction caused by static discharge
Effective at humidity levels as low as 3%
Does not degrade under thermal cycling
Anti-Static Glass and Screen Cleaner
Ref: ASC250ML
For use on all glass surfaces around the office and assembly areas including monitors, test equipment and anti-glare filters
Non-smearing
Non-flammable, alcohol free
Safe to use on all coated glass
Use with AAC100
|
|
Flux Remover
Ref: FRC
Non-flammable
Low VOC
Effective %u2018no-clean' fluxes and many water based fluxes and p astes
Rapid cleaning and fast evaporation rate
Residue free
Plastics-safe
|
|
|
Certified Benzoic Acid Tablets are now available from Digital Data Systems. We are selling bottles of certified benzoic acid tablets - 50 x 0,5g tablets per bottle. These high quality tablets are selling at under US$25 per bottle.
|
|
DEXCEL BIO 3000 L removes polyurethanes in low-pressure mixing heads.
Its constituents are acting in a synergistic manner to wash out and to strip thoroughly the mixture of isocyanates and polyols which are polymerising in the low-pressure mixing heads (production of polyurethanes).
Its formula improves safety, it replaces dangerous solvents and inefficient cleaners.
This product is biotechnologic, mainly based on materials coming from agrochemistry and is non hasardous for environment and health.
|
|
Lubricant with a high viscosity index, providing good adhesion and penetration properties.
Suitable for the lubrication of all sort of chains :
roller chains, long pitch, API type, with hollow rivets, with close links,
open mechanism...
Penetrates everywhere, even in the hard-to-reach areas, and reduces wear.
Water-repellent, it can be sprayed on humid surfaces.
This product has a good water resistance, (even salted water, hot water, and vapour); and ensures an anticorrosion protection.
It has no drop point or projection tendency.
Excellent stability, chemically inert, and neutral.
Reduces operating noises, reduces vibrations, facilitates assembly.
|
|
Degreaser and cleaner for unpolymerised resin residues.
Used only at room temperature, Moulnet 888 increases the release agent adhesion and the number of releases.
Advantages
Degreases thoroughly all surfaces
Helps the release agent application
Improves mould release agent performances
Suitable for plastic, metallic and composite moulds
Does not damage the mould
Properties
Colourless liquid
Boiling point : 80 °C
Inflammable
|
|
|
SURFACE CLEANER is a combination of solvents specially blended to aid in the preparation of new and used molds/tools prior to treatment with Zyvax ZYVAX MOLD CONDITIONERS AND RELEASE AGENTS.
|
|
CLEAN-setral-AN/U - Multi-purpose high-performance cleaner for industry and work-shops.
For residue-free basic cleaning prior to relubrication of maschine components. Removal of grease, oil, resin, dirt and remains of sealings. Product should not be used under electric potential. Product should evaporate completely, as otherwise fire risk exists.
Advantages:
* Cleans quickly and thoroughly
* Leaves no residue
* Economical in use
* Free from chlorinated hydrocarbons
|
|
|
LubTool 4000 is a highly effective cleaning spray by the combination of several cleaning-active active substances unusually effectively against most diverse contamination proceeds. LubTool 4000 for the distance of verharzten oil and fat remainders is particularly suitable. Use they LubToo also for problems with lacquers, colors and coloured pencil markings like also general contamination at engines and machines.
|
|
Heavy-duty performance
Power blast spray
Nonflammable
Nonchlorinated
Nonconductive
Fast Evaporating
No rinsing
No residue
Safe on Most metals (as per MIL-T-81533A)
NSF registered category C1
|
|
- Electra Clean Spray: Ideal for electrical and electronic fine parts. Cleans and degreases delicate mechanisms. Removes light greases, oils, dirt and organic soils. Quick evaporation. Safe to use on most surfaces. Non conductive. Fast penetration. Superior wetting action. No rinsing and no residue. NSF K2 Registered
- Foam Cleaner Spray: Foaming action - pleasant and economical to use. Ideal for all non-porous surfaces. NSF A1 Registered
- Industrial Cleaner Rapid Dry: Multi purpose cleaner. Fast evaporation. Safe on metals, most plastics and paints
- Heavy Duty Cleaner: Lifts grease and grime so that the resulting residue can be easily removed.
|
|
|
|
|
|
WEICON TFT/LCD Screen-Cleaner
The ideal product for the cleaning and care even of sensitive plastic and glass surfaces. It removes dirt, dust, grease and nicotine and cleans carefully without leaving residues.
WEICON Brake Cleaner
WEICON Brake Cleaner is a multi-purpose cleaner especially for the automotive sector. It quickly cleans and degreases metals, glass, ceramics and many plastics without leaving residues.
WEICON Burner Cleaner
WEICON Burner Cleaner is especially formulated to remove grease, oil, soot and other dirt accumulations from burner parts. WEICON Burner Cleaner leaves no residues.
WEICON Cleaner Spray S
WEICON Cleaner Spray S degreases and cleans all metals, ceramics, glass and most plastics.WEICON Cleaner Spray S evaporates quickly and, unlike thinners, cleans without leaving residues.
WEICON Compressed-Air Spray
WEICON Compressed-Air Spray is used where traditional methods of dust clean-up would not work, as on parts of difficult access. It allows to dedust corners and sensible surfaces in a dry and contact-free way.
|
|
Azeotropic fluid, slightly odorous, with high solvency power, that makes the elimination of non crosslinked polymers possible.
Biodegradable. Can be used in the area of food.
Allows the elimination of residual traces with rag on screws of polymers extrusion but also on moulds, machines or their environment.
Very good solvent of contact adhesives as well as resins crosslinking under UV.
DEXCEL SL 80 is very effective on carboxyalkyles celluloses.
|
|
Fuchs proposes a complete range of detergents and solvents of high technologies for industrial degreasing.
The offer of industrial detergents also includes/understands products of paint preparation and scouring.
|
|
General-purpose solvent that is active on a large range of inks.
Very low odour, light note of citrus fruits.
Fast evaporation speed, avoids deceleration of printing rates.
Clearly reduces rejects during machines restarting.
Excellent decantation of inks in collecting trays.
Adapted for cleanings with a sprinkling cleaning machine.
Improves safety thanks to its flash point.
Improves health : guaranteed free from toxic or irritating raw materials.
DEXCEL SERIMAX R is efficient on alkyds resins like urethans modified alkyd
resins.
|
|
|
|
|
|
GALVA spray can is a zinc galvanizer high temperature.
It is recommended for a durable protection of all metal parts, ferrous
or alloys type. Contains Zinc to 99,99 % of purity . Ensure coatings with
constant thickness, with a homogeneous aspect and brilliance. Film
being characterized by the great quality of its aspect. This galvanizer
resists temperatures of 550 °C, without degrading itself; this
characteristic allows to the user any employment on body subjected to
very strong temperatures. Moreover, coating carried out is weldable (except under argon).
This galvanizer used cold offers many advantages:
- galvanic protection, with principle of oxydoreduction obtained to 100 %.
- Protection against thermal, but also chemical corrosion.
- Film carried out, without run-out, extra thickness, not degrading itself at the time of applications on screwed assemblies.
- Very big covering capacity, except dust quickly, allowing an application on all types of sites.
- Finished perfect, brilliant aspect.
- After total polymerization (24 hours with 25 °C), paintable, with all types of paintings.
|
|
|
|
|
|
PDI® color dispersions for thermoset plastics are available in a wide range of resin-matched vehicles offering total reactivity with all polyester, epoxy and polyurethane resins and compatibility with all PVC and silicone formulations. Containing up to 80 percent pigment by weight, these concentrated dispersions undergo special processing that breaks down pigment agglomerates into individual particles that are wet-out in suspension, preventing re-agglomeration and increasing opacity of the original pigment by 50 to 80 percent. Primary base colors are maintained in stock for rapid, low-cost blending of custom colors in small or large quantities.
PDI Dispersions are smooth, workable pastes comprised of the highest-quality pigments dispersed in a range of liquid and paste vehicles which are 100 percent reactive and/or compatible with thermoset resin systems. This virtually eliminates effects on physical properties and, together with high pigment concentrations, enables the thermoset processor to achieve consistent coloration with unsurpassed ease and economy.
|
|
|
Our masterbatch solutions include an array of additive materials that enhance the performance of thermoplastic parts, improve manufacturing efficiency, reduce manufacturing downtime and enable smooth product transitions – available in a variety of physical forms for different manufacturing processes, including pellets, flakes, beads, powders and liquids.
|
|
ConcreteMedic® Concrete Cleaner & Conditioner is a unique combination of natural ingredients designed to form a water insoluble and dirt-repellent barrier on polished concrete while improving its appearance and extending the life of the polish. Cleans and conditions polished concrete. Utilizes special fatty acids not found in inexpensive standard "soaps". A proven product used by leading concrete contractors.
In wet applications, adding Cleaner and Conditioner with Diamond Life Extender while polishing provides additional diamond life and increased finished clarity. When added to the solution tank, the Diamond Life Extender provides additional lubrication for the diamonds, thereby decreasing wear and increasing efficiency. In addition, Diamond Life Extender facilitates easy clean-up of grinding slurry by chemically binding the loose minerals for easier removal.
|
|
Corrosion inhibitor sealants
Polysulfide-based dual-component polymer sealants.
Presentation
LJF® offers a complete line of corrosion inhibitor sealants
Advantages
Corrosion protection in the harshest environments.
New product line in accordance with H&S regulations
Applications
- PR 1771
- PR 1773
|
|
Water-based biodegradable formula
Removes tough, stubborn stains
& soils such as grease, oil,
sludge, soot, ink, coffee, and more
Does not contain chlorinated or
petroleum solvents, bleach,
ammonia, abrasives or butyl
Contains a corrosion inhibitor
to help prevent flash rusting
Super industrial-strength
Nonflammable
Safe on all surfaces
|
|
Clean and degreases all the elements of brakes and clutch. Eliminate quickly oils, greases, liquid of brakes, tar, bituminizes and other deposits of surface.
Net volume: 500 ml
|
|
Scope of application
Machine elements
Bed plates
Cleanings and maintenance
Hygiene and safety
Products: fluids and actors of surface
Solvents
Degreasers
Detergents
Rust removers
Fluids of protector
Absorbents
Soaps
Products of hygiene
|
|
|
|
Chemical products, Solvents, Aerosols, ...
