|
|
|
Canon Precision's actuator units are developed and designed by utilization and implementation of simulation techniques combined with motors, our core technology. These small sized, lightweight actuators, designed to customer specifications, have already been used in many applications, such as water boiler valve actuators, with very high levels of customer satisfaction.
|
|
|
Tubular motors from elero are maintenance-free and have a long life, making them especially suitable for the mentioned applications. Of course, the Type 15 series can be easily combined with the necessary safety technology, such as safety brake and lower rail disconnect, via a motor control unit with radio control.
|
|
Many applications in new and old buildings with compact design
The folding shutter is in vogue. Both in old and new buildings, we often choose a conventional and classic solution with a modern design. This solution supports safety, saves energy and is used as a solar protection system.
|
|
The quietly running elero drives are reliable, durable and maintenance-free. They offer you the comfort of operating your roller shutters or awnings automatically by pressing a button instead of via crank drives or belts. The easily installed tubular motors can be fitted into shafts from 40 to 98 mm. They require very little space and are protected against overload by a thermal protection system.
|
|
The performance of elero's “JA” venetian blind drives can be perfectly adapted to venetian blinds. These reliable drives operate with high precision and are maintenance-free.
The squirrel-cage motors have an integrated thermal protection and conveniently adjustable limit switches with a range of up to max. 85 revolutions. The limit switch adjusting buttons for the upper and lower end position are individually accessible from the outside.
|
|
Electromechanical Dual Drive
At only 83 mm, the PR D10 drive combines minimal installation height with maximum power. The flat, compact design leaves more
space under the bed . The PR D10 is silent and, at 4.7 kg, a true light weight.
The dual drive features a functional housing. It can be installed by simply twisting the housing in between the rotating axes - it doesn't get any easier
than that. No additional hardware is required. The PR D10 can be used for center distances of 581 mm, compatible with all common standard fittings, e.g., from Stawett.
|
|
Electromechanical Dual Drive with optional fitting kit
At only 104 mm, the PR D20 drive combines minimal installation height with maximum power.
The low-profile, compact design leaves more space under the bed. The PR D20 is silent and, at 4.6 kg, a true lightweight.
The dual drive features a functional housing which can be easily mounted in any position between the rotating axes. No additional hardware is required.
The PR D20 is available with an optional fitting kit for a center distance of 581 mm. The plug-in axes can accommodate variable fitting widths.
The PR D20 comes with a mechanical lowering function that can be activated in no time - a useful feature during a power cut.
|
|
HAYDON dual motion actuators are based on unique, patented designs and incorporate Haydon’s proven motor technology.
Three sizes are offered from 35 mm to 57 mm, providing independent linear and rotary motion from a compact package.
In certain applications, it is required to have both rotary and linear motion. Such an application, for example, is in the robotic picking and placing of components where it may be required to axially move a component to an insertion position and then rotate the component to screw it in place.
The linear/ rotary unit allows for simplified system design and a reduction in the number of components. It is ideal for use in tight fitting applications requiring precise two degrees of freedom, controllable motion, pick and place equipment, robotics, and a wide array of instrumentation.
|
|
Programmable electric linear rotary actuators with either direct drive or gearbox equipped rotary units. Fully programmable in force/torque, velocity and position with 100% data capture and feed back facility. Standard linear resolution is 5micron with 1micron and 0.5micron options available.
The SMAC unique “Softland” routine within the actuator allows the rod to approach at high speed then land on the surface of a component with a low programmable force. This unique feature is extremely useful whenever delicate or high value components are being handled.
SMAC electric actuators are used widely in packaging, labelling, automotive, SMT, robotics, pharmaceutical, medical assembly, laser cutting, high speed scanning, glass cutting, dispensing, switch testing, spot welding, soldering & measuring applications to name but a few.
|
|
APPLICATION :
traction system for cleaning machines, material handling, golf cars, small vehicles.
FEATURES :
Type of motor mounted: permanent magnet
Gearbox: parallel axis with steel gears
Diameter exit axles: 20 mm [0.78 in]
Reduction ratio: 16.4/1
Power up to: 200W (MP56) - 600W (MP80)
Electromagnetic brake available
|
|
APPLICATION :
traction system for cleaning machines, material handling, golf cars, small vehicles.
FEATURES :
Type of motor mounted: permanent magnet
Gearbox: parallel axis with steel gears
Diameter exit axles: 20 mm [0.78 in]
Reduction ratio: 16.4/1
Power up to: 200W (MP56) - 600W (MP80)
Electromagnetic brake available
|
|
Specifications
Weight capacity: 2,000 lb
Ratios: 8.2:1, 11.1:1, 15.9:1, 23.2:1, 29.4:1
(SPECIAL RATIOS AVAILABLE)*
Power: 12 through 48 Volts DC up to 2 HP
Features Include
Cut steel helical gearing for smooth and efficient operation
Splined interface between motor and transaxle for easy serviceability
Motor diameter: Up to and including NEMA 56 Frame (6-5/8" DIA.)
Oil seals on axle shafts for dirt exclusion
Ball bearing construction
All aluminum housing
16-1/2” Mounting length standard
Housing through holes for optional mounting
Neoprene mounting sleeves
OPTION: Custom shafting (1” Dia. Max.) and wheel flanges
OPTION: Plating for corrosion resistance
OPTION: Parking brake
OPTION: Extended mounting lengths available *
* Consult Factory
|
|
The BEI Kimco Magnetics RA models are used in many applications ranging from Z axis control in semi-conductor lead bonding equipment to gimbal torques and pick-and-place robotics. Actuators feature maximum stroke of +/- 60 degrees, maximum torque of 20nm, through hole and set screw hole for easy shaft coupling and two through holes for field assembly mounting. Choices include arc-segment and cylindrical designs.
|
|
|
SKF rotary actuators are designed to provide rotary motion. Fast or slow. Heavy or light duty. Complex or simple arrangements. You can chose from a wide variety of application areas. You will find a solution with both technical and economic advantages. Since the gearing is produced in one stage, through the use of a ball screw, you can also rely on a high degree of efficiency. Select the zero-backlash versions for maximum precision.
|
|
|
|
|
|
LINAK has launched a wide range of lifting columns to be used in various sectors with the purpose of improving ergonomics at different kinds of workplaces.
LINAK lifting columns allow applications such as
desks
tables
beds
kitchen units and
heavy-duty industrial workbenches
to be raised, lowered or tilted by means of a button. With the LINAK lifting columns it is possible to install sophisticated motorised systems that provide optimum ergonomics at a modest price.
Compared to the lifting columns mentioned, LINAK does manufacture columns used for vertical lift of hospital and care beds where design, easy cleaning and ergonomics are important factors.
LINAKs several different types of lifting columns are for instance LC2, LP2, LP3, DL1, DL2, DL4, DL5 and DL6.
LP2 and LP3 are used in the hospital and care sector for height adjustment of e.g. stretchers, incubators and surgical chairs. The LC2 is a further development of the LP2 and LP3. Besides the applications mentioned above LC2 is also a good choise in more industrial applications.
DL1, DL2, DL4, DL5 and DL6 are part of LINAK's DESKLINE® system for ergonomic sit/stand office desks. DL1, which set the standard of the market, is compact and avaiblable in more colours. The DL2 system offers a progressive speed control, meaning you have the same speed level both upwards and downwards. The DL5 and DL6 are further developing the DL1. DL4 is also called the DESKPOWER™ system.
At the touch of a button the DESKPOWER system can adjust desks within a range of adjustment from 60-125 cm at a high speed level irrespective of load. At the same time the noise level is extremely low.
|
|
Lifting columns are the ideal drive elements when a motor setting is required in addition to the stable guidance. The whole technology is integrated and not visible from the outside. These lifting columns do not need any additional coverings. Usually, no special electrical knowledge will be required for the commissioning. Various versions are available as standard for the application in the field of medical technology.
Several lifting columns can be combined and synchronised and offer further impressive application possibilities. The MultiControl-units can be linked by a BUS-system and enable the synchronization of maximal 32 lifting columns.
|
|
For guided lifting and lowering of the workpiece.
The lifting movement is effected power-supported by a hydraulic or electrical actuator against the weight of the workpiece.
The lowering movement is a defined lowering by use of the weight.
For maximum workpiece weights of 100 to 1,000 kg.
Maximum strokes from 200 to 940 mm.
|
|
Light, elegant aluminium profile with a very quit run (<40db)
Are used especially in the medical sector (Ophthalmology, Ultrasound)
Columns of these types can also run in parallel (large tables, ergonomic work)
Big Advantage: Plug and Play
Most of our columns, we call Plug and Play. After receiving the column, attach it to the network power and with the delivered hand switch, you can use the column immediately.
Application: Adjustable chairs and tables, adjustable tables for computer, lecterns and so on
Force: up to 2200 N
Electric current: 230V / 50 Hz
120V / 60 Hz
100V / 60 Hz
Multifunction (all Electric current are possible in one column)
Custom Option: on request
EN 60601-1 certificated
All Materials are recyclable
|
|
|
|
|
|
LINAK has launched a wide range of lifting columns to be used in various sectors with the purpose of improving ergonomics at different kinds of workplaces.
LINAK lifting columns allow applications such as
desks
tables
beds
kitchen units and
heavy-duty industrial workbenches
to be raised, lowered or tilted by means of a button. With the LINAK lifting columns it is possible to install sophisticated motorised systems that provide optimum ergonomics at a modest price.
Compared to the lifting columns mentioned, LINAK does manufacture columns used for vertical lift of hospital and care beds where design, easy cleaning and ergonomics are important factors.
LINAKs several different types of lifting columns are for instance LC2, LP2, LP3, DL1, DL2, DL4, DL5 and DL6.
LP2 and LP3 are used in the hospital and care sector for height adjustment of e.g. stretchers, incubators and surgical chairs. The LC2 is a further development of the LP2 and LP3. Besides the applications mentioned above LC2 is also a good choise in more industrial applications.
DL1, DL2, DL4, DL5 and DL6 are part of LINAK's DESKLINE® system for ergonomic sit/stand office desks. DL1, which set the standard of the market, is compact and avaiblable in more colours. The DL2 system offers a progressive speed control, meaning you have the same speed level both upwards and downwards. The DL5 and DL6 are further developing the DL1. DL4 is also called the DESKPOWER™ system.
At the touch of a button the DESKPOWER system can adjust desks within a range of adjustment from 60-125 cm at a high speed level irrespective of load. At the same time the noise level is extremely low.
|
|
Electric Lifting Columns from LINAK
In the lifting column, the guide and electric linear actuator are integrated. With the electric lifting columns from LINAK it is possible to install the sophisticated motorised system that provides optimum ergonomics in a range of applications. Electric lifting columns from LINAK are designed to raise, lower or tilt:
beds (hospital beds, care beds and home beds)
desks
incubators
industrial workbenches
kitchen units
tables
stretchers
surgical chairs
and more
Lifting columns for hospitals, care, industry, office and home
Some series of electric lifting columns are in particular designed to meet the needs of the hospital and care sectors, the office furniture market, the industry and the comfort furniture market.
|
|
LINAK has developed electric linear actuator accessories over the years based on customers’ needs.
Accessories offered by LINAK include
potentiometers
electric pulse encoders (reed switch)
safety nuts
splines and
LS/LSD (signals for end-stop).
battery packs
Chargers
Switches
Extension cables
a massage motor
and more
|
|
Electric dual actuators are electromechanical units that convert low DC voltage from a control box into movement. TWINDRIVE®-systems consist of electric dual actuators with integrated control boxes and controls for adjustment when mounted in bed applications.
The electric dual actuator system TWINDRIVE supplies the growing demand for motorised systems in adjustable electric beds. The electric dual actuator systems from LINAK are specially designed for applications like
adjustable leisure beds and comfort furniture
adjustable hospital beds
adjustable care beds
TWINDRIVE is characterised by a very low built-in dimension, which makes it unique in this market, and gives much more free height under the bed than previous electric dual actuators.
The TWINDRIVE systems also support integration of special features like massage, infrared control, and much more.
|
|
HAYDON is recognized worldwide as a leader for linear stepper actuators, based on the most advanced patented technologies converting the rotational motion into a linear motion.
In addition to its Hybrid range of motors, Haydon is offering a complete family of linear actuators ranging from 15mm square to 46mm square. All sizes have three designs available – captive, non-captive and the external linear version. There are over thirty different travels per step available, from 20 microns to 400 microns.
Rare earth magnets are available for higher thrust requirements. All units are built with dual ball bearings for greater motion control, precise step accuracy and long life.
Haydon custom designs and manufactures linear stepper motors for medical equipment, instrumentation, industrial equipment and many other applications.
|
|
saia linear stepper motor
Dimensions (mm) Ø 36x36
Travel (mm) 8, 13, 45, 56
Travel per step (mm) 0.033
Speed by 200 Hz (mm/s) 6.67
Resistance per winding
bipolar/unipolar 6 V (Ohm) 18.5/28
12 V (Ohm) 100/120
24 V (Ohm) 460/500
Max force (N) 35
|
|
saia linear stepper motor
Dimensions Ø 55 x 58 mm
Characteristics
* integrated non-rotational threaded spindle
* thread pitch 1.5 mm
* resolution: 31 µm / step
Stroke 55 mm
Force 400 N @ 25 % duty cycle
Step angle 7.5°
Speed 6.25 mm/s @200 Hz
|
|
Key Attributes and Characteristics:
- Frame sizes ranges from 20 mm (0.787 in.) to 57 mm (2.281 in.)
- Linear travel per step: 0.0127 mm (0.0005 in.) to 0.1016 mm (0.0040 in.)
- Output force up to 111.2 N (25 lbf.)
- Eliminate coupling necessary to translate rotary to linear motion
- Reversible
- Unipolar and bipolar designs
- Ball bearings
- RoHS compliant
- Captive and non-captive versions available
Advantages:
- Low cost construction
- Ease of use in application
- Fast, powerful and precise positioning
- External components reduced in application
- Customization to meet application demands, including screw length, connectors, and sub-assembly
|
|
|
PFL, PFCL series LINEARSTEP® motor ranges in diameter from 25mm (less than 1 inch) to 35mm (1.38 inches) is tin-can type linear actuator. LINEARSTEP® motor offers direct linear motion without any mechanical transformers therefore allows design engineer to design a simple system at a fraction of the cost of conventional rotary stepper motor. Available in three pitches on the thread lead screw (0.48mm, 0.96 mm, and 1.2mm), a choice of various windings on both unipolar and bipolar configurations, the PFL, PFCL series offers the design engineer the ultimate in flexibility to match the applications requirements. Upon request, connector on the end of motor flying leads can be added to the motor providing a complete assembly.
|
|
The new Mini RoboCylinder is an achievement in small electromechanical cylinders. It incorporates a newly developed motor, and its significantly reduced length, width and height.
The new minature models are available in shapes similar to air cylinders. Users accustomed to the operation of pneumatic systems are able to use the new RoboCylinder effortlessly.
|
|
Saia-motor for positioning, opening/closing or dosing
The new 20mm UAL linear actuator is a small powerhouse. With a resolution of 21 µm per full step, it has a constant force of up to 30 N over the full travel range of 15mm. The compact housing, with a 20mm external diameter, is supported by a direct cable outlet.
The design of the actuator can be engi-neered as a bipolar or unipolar stepper motor, as well as a synchronous motor (max. 50 Vac.). The flexible manufactur-ing of the actuator allows a customer-specific mounting flange and a tailor-made layout design to meet all customer needs. Therefore, the linear actuator has the best preconditions to be used in posi-tioning units, valves and dosing pumps, for example in medical technology or in locking systems.
|
|
|
|
Lifting columns and Other electric actuators
