Dispensing accessories

Final grain size: 1 µm - 5,000 µm
Rotational speed: 800 rpm - 4,000 rpm
Output: 1 t/h - 15 t/h

The universal impact mills type “P IMPACT MILLS TYPE “P – D – PC” are specially used for: • Production of fine powders and sands of limestone and dolomite for glass industries, mortars, plasters, agglomerated floors with resin or cement ...

Final grain size: 1 µm - 3,000 µm
Rotational speed: 600 rpm - 1,800 rpm
Output: 8 t/h - 30 t/h

Grinding at a medium fineness (0÷5 mm) of low and medium hardness minerals (gypsum, talc, lime, dolomite, clay, coal, etc); chemical products; scraps of brittle manufactured products (for example, waste of bricks). It is possible to ...

Final grain size: 1 µm - 3,000 µm
Rotational speed: 1,000 rpm - 1,750 rpm
Output: 15 t/h - 60 t/h

• Production of powders and fine sands of limestone and dolomite for glass factories, premixed dry mortars, agglomerated floor tiles agglomerated with cement or resins (0÷3 mm/0÷8 mm) • Grinding of clays for production of roof tiles, ...

The distributor is designed to change the direction of lubricant flow in the two-way central lubrication system. It is used in the lubrication system (in close proximity to the pump), in which the pump does not have a distributor. Permissible ...

Two-way feeders (dosing distributors) are designed to feed certain portions of lubricant to the lubrication points in machines and devices. They are component parts of two-way force feed lubrication systems. Number of grease outlets ...

The CMC mixing unit is a system designed for a fast dispersion of hydrocolloid products such as carboxymethylcellulose (CMC), flours, carbopol, pectin, and guar or xanthan gum. These additives are widely used in industry on account of ...

The outstanding properties of glass linings are not only useful in static vessels, such as storage tanks, receivers or columns, but also in reactors. Reactors work dynamically, under pressure, at vacuum, are heated, chilled, and have ...

• Available with different outlet widths (from di = 8 mm to di = 65 mm) • Flow rates of up to 5.97 m³/h at a 65 mm valve • Made of stainless steel Each FÜLL dosage and paint mixing system is built with valves individually adjusted ...

Pressure: 3,625 psi

DF-7 spray gun is well designed in combination with practical onsite construction, its spare parts can be commonly used with other equivalent guns.DF-7 spray gun is well designed in combination with practical onsite construction, its ...

There are various types of table and counter dispensers for use with envelopes, small parcels and presents.

Output: 1,000 kg/h

The PGS 165 is manufactured by Alexanderwerk. This grating and shredding machine is designed for inline installation, but can also work as s mobile unit. It has a cylinder diameter of 165 mm, and can produce throughput rates up to 1,000 ...

Output: 10,000 kg/h

Alexanderwerk's PGS 340 Grater/Shredders are primarily utilized for applications that involve inline installation functions. They are also used as alternative mobile units, complete with grating/shredding cylinders with diametric measurements ...

CHIPFLEX is based on a mobile electric chipper located on a railway, and equipped with a handling system as a grapple crane. The operator chooses the wood in one of the bins assigned in advance along the way and feeds the chipper. Chips ...

F.lli Sacchi can offer a wide range of solutions for lumps breaking. According to required flow rates and product type: Blade lumps breakers Rod lumps breakers Sacchi lumps breaker is composed of square section ...

Polyol formulating is a sensitive process which requires approved input materials, high-qualified personnel and reliable blending equipment. The quality of the PU systems is very important either for system houses or for end users which ...

Output: 10 t/h - 240 t/h

Our XLC primary shredders are known as the sturdiest and the most reliable machines. They guarantee high throughput and very good productivity with low maintenance and operational costs. Our primary shredders are suitable for a wide ...

The PDS distribution system is designed for all speed levels. This high-performance handling system can manage in continuous many rows per minute on each single station. This fully automatic system is primarily used in the confectionery ...

GlobeCore develops and manufactures inline continuous USB-1 biodiesel1 blending2 systems, designed for compounding of fuels and any other liquid ingredients, including bioethanol3 and liquids of vegetable origin. These biodiesel blending ...

Impeller stirrer USB-6 is designed for mixing liquid layers in a container or tank. It is used for producing different emulsions and suspensions, including antiseptic and disinfectants. Principle of operation Stirring device consists ...

Rotational speed: 2,950 rpm

CLM-8/16 colloid mill is designed for inline homogenization and emulsification of liquid products (thick slurries of high shear stresses). The mill can be used to prepare, dissolve, and process many products in various industries, in ...

In the food industry cup/tray distributors represent an effective solution whenever you need to lay paper cups down on baking trays or oven belts. Thanks to the types of machines we manufacture, we can work with the entire range of baking ...

Motor power: 8, 160 kW

Bauermeister Universal Mills operate successfully in a wide range of applications for grinding soft to medium- hard materials such as sugar, gypsum, limestone, etc. up to a hardness of approx. 4-5 Mohs. Universal Mills are mainly used ...

Motor power: 30, 75, 160 kW

Bauermeister Gap Mills operate successfully in a wide range of applications for grinding soft to medium-hard materials such as sugar, starch, pectin, etc. up to a hardness of approx. 4-5 Mohs. Gap Mills are mainly used in the food, chemical ...

The Bauermeister counter-rotating pin mill UMP 4.4N Ex has been developed for cocoa pulverising. Between two pinned discs rotating in opposite directions, the cocoa press cake is disagglomerated and crushed. The cocoa press cake is centrally ...

Application: For open and closed tanks are different mounting devices available. Installation depth: The EV3 is suitable for plugging onto the wall and for a 4 - 12 m container height. Adjustment: Through the rope winch the optimised ...

Application: For open and closed tanks are different mounting devices available. Installation depth: The EV4 is suitable for closed container (not gas tight) with a height of 4 - 12 m. Guiding system: The guide mast is available in the ...

Application: For open and closed tanks are different mounting devices available. Installation depth: The EV5 is suitable for plugging to the wall of a container with 4 - 12 m height. Adjustment: Through the rope winch the optimised stirring ...

This positioner/sorter is designed for lids/caps with a difficult profile whose centre of gravity is not eccentric enough. Unlike the versatile C31FS and the compact C31L, the pick-up plates are not positioned on a rotating drum, but ...

This unique cable carrier is ideally suited to operate both as a simple carrying device and also as a stable Cable Dispenser for electricians, panel builders and communication cable linesmen. Cable Dispenser is sturdy but light to carry. ...

Rollers - Zinc Plated Steel - Adjustable and fitted with sealed bearings. Maximum Drum Payload: 200Kgs Finish: Zinc Plated Drum Diameter: Max 750mm, Min 200mm Drum Width: 520mm Base Size: 630mm x 550mm Weight: 16Kgs

This genius invention is most commonly used for dispensing wire from spools of various sizes, but just flip through the images to see its many other uses! Features Interlocking Pairs Versatile Waterproof Rustproof Reliable Rugged Easy to set up

The most suitable solution for capacity starting from 1200 l/h. Unlike the BATCH solution, the pasteurization temperature is reached in the plates and maintained for the necessary time in the coil. The particular architecture of the ...

SKU TEC 1050 Melt Rate 50g(1¾oz)cartridge / 10 mins Glue Size 50g (1¾oz) CT cartridge Voltage 220-240V Wattage 500W (14W) Heater PTC Temperature Control Self regulating heater 130°C (265°F) Cable Length 1.8M (6ft) Weight Gun ...

The TEC 305 lightweight, professional glue gun offers unrivalled reliability, ease of use and exceptional adhesive melt rate for a glue gun of this size. High quality, self-regulating heaters control the glue gun temperature and is designed ...

SKU TEC 3200 Melt Rate 3.5kg (8lbs)/hr Glue Size 43mm (1¾") glue cartridge Voltage 120V and 230V Wattage 400W Heater Cartridge Temperature Control Electronic plug-in temperature modules Cable Length 3M (10ft) Weight 1.15kg (2½lbs) Packaging ...

The injection molding plastic granulator is developed by MAIN TECH S.r.l. It is specifically designed to cater applications that involved transmission. Features of this product includes its low number of turns and adjustable fixed blades. ...

The GRM230/340-490 compact granulator and shredder series is machinery built for promptly recovering medium-sized sprues and scraps. It can do this either as periferal machinery in a centralized system, or directly at the machine. The ...