Mixer dispensers (resins)

25 companies | 136 products
Filters
  • What’s new?
    Submit

Manufactured by Cannon, the ''A-Compact" has been engineered to deliver a solution for the increasing...

Cannon's policy revolves around flexibility and modularity. Cannon's continuous machine development and design programs have resulted in the "A-System" which applies modular concepts and guarantees maximum flexibility in machine configuration.

Cannon's...

The Cannon A-System Penta Twin is the high pressure metering machine that is developed for safer utilization of flammable blowing agents like Isobutene, Cylopentane and etc. The machine range has 4 models that comes...

The Canon HE System is a piston-dosing unit that has been in circulation since 1983. It represents versatility for polyurethane formulations that require an abrasive filler, as well as high nucleation gas levels or...

The CANNON B-System Series, available in three models, can perform the widest range of polyurethane foam operations. There is the "Easy" version that has a easy control system. There is the "Smart"...

{{productDetail[61208]}}

The Continuous Flow 2-Component Meter-Mix-Dispense system offers precise volumetric metering of low to medium viscosity materials. The two component meter mix dispense system has an adjustable ratio and...

The See-Flo 202 Meter-Mix-Dispense System utilizes a compact meter design, with a remote PLC control and carbide valves. The...

The See-Flo 387 Bench Top Meter-Mix-Dispense System is optimized for bonding, potting, encapsulating, sealing and laboratory operations. It is ideal...

The See-Flo® 391 are carbide made valves and remote PLC control which is suitable for semi-automatic...

With a volume capacity of 9.4 cu. in and with a ratio of 1:1, the See-Flo 494 is truly a proven meter mix dispense system. It is used for sealing,...

{{productDetail[25293]}}

The MicroPro series of proportioners from Magnum Venus Plastech is made for applications that require accurate metering in a wide array of materials at very low...

{{productDetail[39130]}}

The Fisnar LC50FR is a pneumatically-powered mixing and metering piston pump series capable of being modified to disburse liquids from 1 cc to 50 cc per cycle (according to the blending...

The LC120FR series integrates a robust parallel drive system that is capable of providing controlled flow characteristics during the...

The FR300 and FR1200 are pre-determined ratio systems that integrate the Fisnar Parallel Drive (PLD). This provides a regulated flow characteristics...

The VR300 & VR1200, which are manufactured by FISNAR, is a resin mixer-dispenser piston pump that has been developed to provide...

The Mini variable-ratio system aims at simple accommodation of a mix-ratio to match applications that need several materials. The positive replacement metering...

{{productDetail[13752]}}

The A310 TP (Top Pump) preparing and feeding unit is specifically designed for the optimal vacuum-driven processing and dispensing of extremely viscous and difficult materials that nevertheless display self-leveling properties.

In typical operations involving the dispensing of exceedingly viscous materials, a barrel follower plate aids in the supply of the high viscosity product...

Minimized Material Feeding Unit for Easy Dispensing Tasks Under Ambient Air Conditions. Utilizing the material sustaining unit A90 guarantees the enduring and continuous nourishing of apportioning material.

To meet the distinctive prerequisites...

The Model Dos A90, manufactured by Scheugenpflug AG, is a two component resin mixer...

The LeanCNCell is a flexible and versatile production system that is used for the production of electric and electronic components. This is system has...

{{productDetail[35264]}}

The Compomix Series of Resin Mixer-Dispenser, manufactured by DOPAG Dosiertechnik und Pneumatik...

The Eldomix 10x Series of Resin Mixer-Dispenser, manufactured by DOPAG Dosiertechnik und Pneumatik...

The Eldomix 10x Series of Resin Mixer-Dispenser, manufactured by DOPAG Dosiertechnik und Pneumatik...

Resin mixer-dispenser / with gear pump from the Eldomix 20X range of systems are compact...

The eldomix 30x scope of frameworks are conservative, dissolvable free, apparatus pump driven metering and blending frameworks....

{{productDetail[14484]}}

The INJECT HD 1 Series Two-Component Resin Mixer-Dispenser, manufactured by WIWA, is specifically...

Wiwa 2K-Inject 14025 is an injection system with updated technology for injection and pressure grouting...

Polyurea is a great high quality coating material that has its utility in the field of industrial corrosion protection. It is an innovative material which is used in the construction...

The WIWA DUOMIX PU 280 was specially developed for the processing of PU-foams, based on the experiences made with the WIWA DUOMIX PU 460. Due to its compact design, the PU 280 is very flexible in...

{{productDetail[82273]}}

Easy Spray is specially designed air driven proportioning unit. It has a very compact and advanced design that provides very easy utilization.
The portable unique structure gives a very easy access to different types of working areas. This is a result of the...

The new advancement G-125/G-200a air driven proportioning unit is of a progressed and minimized configuration. It is exceptionally gone for the applications of polyurethane froth set up (G-125a), polyurea and polyurethane coatings (G-200a)....

The new advancement VR powerfully determined proportioning unit has been planned and fabricated for the application of Polyurea, Polyurethane Foam and other two-segment frameworks obliging exact control over temperature, weight and blending proportion....

The new advancement G-250h using pressurized water driven proportioning unit has been outlined and made to satisfy the most requesting prerequisites of mechanical froth set up applications of two segment frameworks obliging high...

{{productDetail[80383]}}

The model DG 10 is a two-component lab and prototype system. It is designed for the processing of...

The DG 107 is a tabletop model from Polytec which is designed for casting and spraying materials...

The DG 108 is a two-component resin mixer-dispenser, manufactured by Polytec Group. It is characterized...

The DG 105 is a unit with a low-weight throwing machine in secluded...

Polytec's DG 3 Series is utilized for applications that involve industrial systems that are driven manually, semi-automatically, or...

{{productDetail[77058]}}

EVOjet™ saves resin costs up to 50%

The EVOjet dry resin blending system secures a perfect resin application, a combination of a large surface area of fibers in the conveying air and...

The PROjet optimisation system for blow line blending consists of hardware- and software components, which together, achieve significant savings in resin consumption. The precise control...

{{productDetail[70088]}}

The DM 402/403 is a 2- or multi-component high-performance low pressure semi- or fullyautomatic...

The individual mixture. Tailor-made with modular design for your seals.

The Dispensing Cell SD - DM 402/403...

The Dispensing Cell SMART - DM 402 is a 2-component high-performance semi- or fullyautomatic mixing and dosing...

The DM 50 and DM 70 are manual 1- / 2- component mixing and dosing systems...

The DM 50 and DM 70 are manual 1- / 2- component mixing and dosing systems...

{{productDetail[62294]}}

This dispenser mixes and discharges 2 part UV resin, using a screw pump to control accuracy...

{{productDetail[8388]}}

2-component metering- and mixing plant

For Applying:
• epoxy resins
• polyurethane resins
• silicones

Applications:
•...

For Applying:
epoxy resins
polyurethane resins
silicones
methacrylates

Applications:
Prototypes and samples
Serial production
Housing and covers
Furniture...

2-component metering- and mixing plant to process thixotropic systems

Technical Data:
• Switch cabinet with controller, pneumatic and mechanics
• Feed part A direct from suppliers 20 litre open topped straight...

2C-Meter Mix and Dispense machine for In-Mould Gel-Coat or Repair application

Technical data:
• Stainless steel frame
• Zink plated machine platform
•...

For Applying:
epoxy resins
polyurethane resins
silicones

Technical Data:
•Stainless steel chassis and working surface
•Rollers
•High precision steel...

{{productDetail[54824]}}

Resin Filling Plant
With this plant, polyester resin and peroxide are delivered in exact proportioning. The saving in time of more than 50 % already justifies the purchase of such a plant. Moreover, there is no harmful...

{{productDetail[38863]}}

The VRI-515 machine has been developed using the experience gained with the successful Aplicator VIM-5 and RI-15 machines. The VRI-515 is an innovative concept for the manufacture...

For all laminating methods in the GRP industry.

Very high capacity - outstanding flexibility.
Quick changeover to differentproduction methods.
Can supply several application tools simultaneously.
Advanced tested technique.
Easy and safe to operate with simple controls

IP-8000

General

Aplicator's...

The old IP-8000 series has been widely used and has become a best seller in the GRP-industry. IP-8000 Mk II is the latest development of the now famous IP-8000 series. Utilising proven technology from both the old IP-8000 series and the IP-8 HD machine. It is efficient, clean to use, safe and easy to handle with simple controls for straightforward operation. Equipped with a new catalyst...


Very high capacity - outstanding flexibility.
Quick...

A specially designed machine for application of medium- to high viscosity material such as Polyester Putty, Sealants, silicones, grease, adhesives and other similar materials in single...

{{productDetail[55308]}}

Manual or integration mixing and dispensing machine for single part processing

The...

Integration mixing and dispensing machine for potting and bonding of components

The...

Fully-automated mixing and dispensing machine with manual assembly for potting and bonding of components

The...

Space-saving fully-automated mixing and dispensing machine for processing components in high volume production

With the...

Fully-automated mixing and dispensing machine for processing components in batch production

With the compact mixing...

{{productDetail[30908]}}

The Environics® Series 2040 Computerized...

{{productDetail[69901]}}

The */PolyMix/* machine ranges are systems manufacture to give a long work life in a tough production environment. Each system is tailored to meet material and application requirements presented by the customer. The systems...

2KM ResinMix range for the wind energy blade manufacture.

2KM are one of the World Wide most accomplished manufacturers in the production of metering, mixing and application systems used in the manufacture of composite blades for power generation from prevailing winds.

The systems presented by 2KM cover all aspects of component manufacture to produce the blade. These include:

·...

Messrs 2KM have embarked on a completely new path in metering technology sector by developing the product line ProcessControlMix (PCM). This new product line differs from conventional machines with regard to power...

ProcessGearMix Silicone metering systems for 4 components metering cabinet with gear pump metering system from 0.6...

{{productDetail[54439]}}

Dual Component - 1:1 Fixed Ratio Spray / Pour System
Urethanes - Coatings - Sealants

* Positive Displacement - Double Acting Pumps with Continuous 1:1 Ratio Delivery
* Internal Mix, Airless Dispensing Gun
* Precise Mixin
* Excellent Spray Pattern
* Simple Operation - Minimum...

Over-Under
Two-Component Dispensing System
Structural Adhesives - Epoxies - Silicone - Urethanes

* All pneumatic drive unit
* Continuous precise mixing
* Manual or pneumatic dispensing valves/mixers
* Purgeless or air/solvent flush
* NO OPEN CONTAINERS
*...

LWE Dispenser
Sealing Waterproofing Repair
Expansion Joints * Traffic Loops
Concrete * Asphalt * Urethanes
Coatings * Sealants * Foams

* ectric powered
* Portable - lightweight
* Pour of spray
* Continuous precise mixing
* Variable ratio
*...

1:1 Fixed-Ratio Pour / Injection System
Urethanes - Epoxies

* Positive Displacement Pumps With Continuous 1:1 Ratio Delivery
* Simple Operation
* Low Maintenance
* Portable Units
*...


Standard Units: 1 gpm
25 ft. Hose Set
Air/Solvent Purge
...

{{productDetail[38017]}}

The Polaris System is The First 2-Component System Developed With The Operator and the Maintenance Supervisor in Mind!
Simple and...

RTM Attachment Included For Direct Injection .

Available in 2 Different Pump Ratios To Fit Your Exact Needs.
The 5:1, and 9:1 Systems Are Built To Last and Feature A
3.7 GPM Stainless Steel Fluid Pump.

System Is STANDARD Internal Mix; Complete With Catalyst Alarm &
Programmable...

15:1 Power Ratio
1" Pump Shaft
75ML per Cycle (4.5 Liters per Minute)
All Stainless Steel Fluid Sections for Durability
0.75 to 3.0% Catalyst...

The Phoenix Equipment Company Is Proud
To Present The “ATLAS” System.

“I” Tip Included For The Lowest Emissions Possible
.
Available...

{{productDetail[55089]}}
Subscribe to our newsletter
Thank you for subscribing
There was a problem with your request
Invalid email address

Receive updates on this section every two weeks.

With DirectIndustry you can: Find a nearby distributor | Contact the manufacturer to get an estimate or a price Examine product characteristics and technical specifications | View PDF catalogs and other online documentation