|
|
|
The Infrared wavelength of the Pico Second DC series is a long wavelength, short pulse laser used in a variety of applications. This DC version of the PS series comes in a compact, air cooled design with an average power of up to 5 W.
|
|
Marking Made Easy.
The laser source includes the scanning head, digital controls and monitoring functions. The whole unit and its mechanical base are covered with high tech polyurethane design case.
Ulyxe is extremely simple and easy to integrate also into turnkey systems and industrial production lines. Standard 24V DC power supply and a PC with USB connection is all that is needed to make a "laser marking system".
The operator can easily interact and monitor the most important laser status and functions with a user friendly LCD / TOUCH SCREEN control display.
Low energy consumption, maintenance free, USB connectivity and most of all an extremely long life of the diode make this Laservall marking laser source a breakthrough in the market.
|
|
Model DTL-318 (200 mW, 300 mW CW, 532 nm, 527 nm)
Features:
- OEM and ready-to-use configurations
- laser radiation in green at 532 nm, 527 nm with output up to 300 mW
- Transverse mode - TEM00
- Spectrum line width < 0.1 nm
- Noise <3% RMS
Power adjustment from zero to maximum, LED display. Power Supply and fan heat sink are included in delivery set (for LCS-version).
Application fields:
Test & Measurement, Spectroscopy, Laser Light Shows & Displays, Alignment, Crystal Inspection, Partial Scattering & Analysis
|
|
|
The OLGDP-200F Series is a family of OEM diode-pumped, solid-state, continuous wave lasers that offer automatic power control at 532nm(green). These completely self-contained systems with the temperature stabilized, low-power-consumption OLGDP-200F lasers are ideal for the widest variety of applications in harsh or industrial environments. Unlike competitive lasers whose diode-generated pump light is the only stabilized element, all OLGDP-200F lasers come with an automatic power control feature. This acts as a detection system that stabilizes the laser output delivered to the application, eliminating the need for additional diagnostics and representing a significant cost savings for the user.
|
|
Models:
- DTL-322 (1064 nm, 2W, 1W, 300 mW)
- DTL-322F (1053 nm, 2W, 1W, 300 mW)
Laser Output in infrared at 1064 nm, 1053 nm, 1047 nm is available.
Transverse mode - TEM00
Noise <1.5% RMS
AC version with AC Power Supply (DTL-system) features an on/off key switch, power adjustment, digital power meter, emission indicator, shutter,remote interlock.
Low voltage versions (with 12V DC Power Supply) are available optionally.
|
|
The OEM OLIDP-800 series are continuous wave infra-red lasers with temperature stabilization and Photo Diode, PD, feedback. This combination produces a laser for industrial application and scientific research. All members of this series contain TE coolers to maintain the Laser operating temperature.
The laser module with PD Feedback, offers excellent power stability at a given temperature, and little fluctuation with changing temperature.
OLIDP-800 Series
. 1064 nm
. High Power Stability
. Temperature Stabilized
. Power Feedback Control
. 200mW and 300mW Models
|
|
The OEM OLBDP-900F series are continuous wave blue laser temperature stabilized modules with Photo Diode, PD, feedback. This combination produces a laser for industrial application and scientific research. All members of this series contain TE coolers to maintain the Laser operating temperature.
The laser module with PD Feedback, offers excellent power stability at a given temperature, and little fluctuation with changing temperature.
OLBDP-900 Series
. 473 nm
. High Power Stability
. Temperature Stabilized
. Power Feedback Control
. 10mW and 20mW Models
|
|
CW / Quasi-CW Solid State Lasers
· Low and high power: 20 mW–15 W
· Multiple wavelengths in the visible and UV
· TEM00 beam profile
|
|
CUBE laser
Power, stability and performance in A small package, and attractive price
Key feature
Compact solvent state (Compass style) package
CDRH Class IIIb safety compliance
USB and RS-232 control
CW and pulsed UP ton of 150 MHz
Similar to modulation and variable power control
|
|
|
|
|
|
Superior marking speed and quality.
Diode-pumped laser sources for marking and engraving.
End Pumped Solid State Laser solution for industrial laser marking applications. An industrial optical fiber connects the laser Head to the Power Supply unit. The laser diode pump is located in a sealed module inside of the air cooled electronic power supply rack.
Characteristics of the ViolinoTM 3 plus are an excellent beam quality, high peak power, short pulse width. Highly aggressive on metals while at the same time limiting thermal effect for optimum marking of plastics. Ideal for marking a broad range of materials with the best results on steel, titanium, aluminum (bare, anodized or coated) as well as on plastics (such as ABS, Lexan, PES, PET, PVC), polycarbonate and many others.
The simple end-pumped architecture, using a TE cooled diode laser pump with high MTBF, assures the reliability and availability of the system required by many industrial applications including automotive and electronic manufacturing.
Power, long term stability and precision of ViolinoTM 3 plus laser allow successful use in all laser marking applications: ENGRAVING, ANNEALING, ABLATION and COLOR CHANGE. ViolinoTM beam characteristics permits material interaction effects such as vaporization, surface marking, removal of coatings as well as alteration of the molecular structure of a material area without affecting the material as a whole. The result is always a visible and high contrast marking.
Thanks of superior marking speed, power and quality, the ViolinoTM 3 plus allows to do better marking performances in terms of time, contrast and deep engraving, such as a higher power laser.
|
|
All solid state 473nm/457nm blue laser is made features of ultra compact, long lifetime, low cost and easy to operate, which is used in fluorescence sensors, Raman spectrum, laser printing, holography, laser display, submarine communication, biomedicine, laser light show, etc.
BLUE LASER POINTER AT 473nm
Be one of the first to over this unique and unusual item in the world. It's a new and fashion gift. Which used in lecture, star observation etc.
7W CW, 80-240VAC, RoHS, FDA, CE complied
|
|
The OEM OLBDP-900F series are continuous wave blue laser temperature stabilized modules with Photo Diode, PD, feedback. This combination produces a laser for industrial application and scientific research. All members of this series contain TE coolers to maintain the Laser operating temperature.
The laser module with PD Feedback, offers excellent power stability at a given temperature, and little fluctuation with changing temperature.
|
|
All solid state 266nm/355nm UV laser is made features of ultra compact, long lifetime, low cost and easy operating, which is widely used in UV curing, micro-electronics, CD carving, laser medical treatment, scientific experiment, etc.
355nm laser,pulsed and CW mode are all available.
up to 800 mW, 80-240VAC, RoHS, FDA, CE complied
|
|
Photonics Industries' deep UV lasers can be configured to produce Q-Switched outputs at 266 nm or 263 nm wavelength in a closed-loop, water cooled configuration.
This series of lasers are available in Nd:YAG, Nd:YLF, and Nd:YVO4 platforms. This variety allows our customers to have the ability to select a laser that best fits their application. Based on the inherent properties of the laser crystals, the DS Series provides a large range of pulse energies, pulse repetition rates, and pulse widths.
The DS series with a deep UV wave length has an average power up to 4 Watts. These lasers produce excellent TEM00 beam quality with M2<1.1 and come with Q-switched output from Single Shot up to 100 kHz pulse rate.
|
|
All CNI Laser modules including infrared laser,visiable laser, all can be fiber coupled as your require. You also have to refer to the detailed specs of the laser modules (such as power, stability, noise, size, etc) to decide which laser you choose for fiber coupling.
80-240VAC, RoHS, FDA, CE complied
|
|
Fiber Pigtailed - Sub-ns Microchip Lasers
Horus Laser designs, manufactures and sales picoseconds microchip lasers based on a new technology. The great competence of its experienced engineering team in the field of microchip lasers made it possible to develop simple, effective and robust designs and to give rise to products with unique performances and specifications on the market.
This HLF version (fiber pigtailed) allows an optimal integration of the lasers into all-fibers systems (modules of supercontinuum generation, optical fiber amplifiers...) !
HLF-I (Infrared) at 1064 nm with singlemode output fiber.
Pulses width from 600ps to 2ns and repetition rates from 5 to 100kHz. Average output power from 100 to 320mW.
|
|
DPSS Green Laser
All solid state 532nm green laser is made features of ultra compact, long lifetime, low cost and easy to operate, which is widely used in collimation, laser medical treatment, scientific experimentation, optics instrument, laser display, laser lighting show, etc.
up to 12 W, 80-240VAC, RoHS, FDA, CE complied
|
|
Photonics Industries' Green lasers can be configured to produce Q-Switched outputs at 527 nm or 532 nm wavelength in a compact, air-cooled design.
This series of lasers are available in Nd:YAG, Nd:YLF, and Nd:YVO4 platforms. This variety allows our customers to have the ability to select a laser that best fits their application. Based on the inherent properties of the laser crystals, the DC Series provides a large range of pulse energies, pulse repetition rates, and pulse widths.
|
|
Photonics Industries' Infrared (IR) lasers can be configured to produce Q-Switched outputs at 1064nm or 1053nm wavelength in a compact, air-cooled design.
This series of lasers are available in Nd:YAG, Nd:YLF, and Nd:YVO4 platforms. This variety allows our customers to have the ability to select a laser that best fits their application. Based on the inherent properties of the laser crystals, the DC Series provides a large range of pulse energies, pulse repetition rates, and pulse widths.
|
|
Diode-pumped solid-state (DPSS) microchip lasers are an exciting new tool for OEM applications that combines the beam quality of a gas laser and the small size and efficiency of a diode laser with single-line output in the blue (473 and 488 nm), green (532 nm), or yellow (561 nm).
Melles Griot lower power DPSS lasers are convection cooled. Higher-power systems include integral forced-air cooling. Our DPSS lasers come in a variety of package configurations and are available in OEM quantities as high as several thousand a year. Request for special designs, tailored to a specific OEM requirement, are always welcome.
|
|
Laser micromachining as the material processing technology on small and very small scale is finding numerous real world applications. Together with the newest technologies diode-pumped solid-state (DPSS) lasers are moving from research laboratories to production lines.
PL10100 – a picosecond high power and high pulse energy laser – from the very beginning is designed to be a versatile tool for variety of industrial material processing applications.
|
|
The OLGDP-200F Series is a family of OEM diode-pumped, solid-state, continuous wave lasers that offer automatic power control at 532nm(green). These completely self-contained systems with the temperature stabilized, low-power-consumption OLGDP-200F lasers are ideal for the widest variety of applications in harsh or industrial environments. Unlike competitive lasers whose diode-generated pump light is the only stabilized element, all OLGDP-200F lasers come with an automatic power control feature. This acts as a detection system that stabilizes the laser output delivered to the application, eliminating the need for additional diagnostics and representing a significant cost savings for the user.
OLGDP-200 Series
. Auto Power Control Function
. High Power Stability
. High Reliability
. Low Cost
. 50mW and 100mW models
|
|
|
|
|
|
Diode-pumped laser sources
for marking and micromachining.
The high electro-optic conversion efficiency of the SagittaTM allows low electrical power consumption with a reduction footprint for the cooling element.
This high efficiency also allows to reduce ageing of the diode laser for long life applications, which reduced replacement costs upon consumption of the diode after an average of 10,000 working hours without any maintenance interventions.
The laser resonator is designed specifically for marking, engraving and micromachining application by optimizing the beam quality. The long-term stability of SagittaTM laser reach the requirements for integration into automatic production lines.
Integration into a complete system is extremely simple.
The power supply rack comes complete with hardware features required to be easily interfaced with external components to build a turn-key system. In order to create a laser marking system it is only required to give signals to control the Scanning Head.
Replacing the laser diode module is extremely simple, all you need is an allen wrench.
SagittaTM is often required on precision marking components, surgical instruments, tools and ball bearings. Using 100 and 160 mm focal length objectives, SagittaTM is able to engrave metals with a very high material removal capacity. The high power density of laser beam combined with the high speed of the scanning head, allows fast, deep engraving on metals.
|
|
AVIA Family of DPSS Lasers
High-power, Q-switched lasers for a wide range of materials processing and micromachining applications at wavelengths of 266 nm, 355 nm and 532 nm.
Key AVIA Advantages :
- Maximum Uptime and Availability
- Better Performance by Design
- Manufactured to Meet Your Requirements
- Global Service and Support
AVIA is a family of diode-pumped, solid-state, Q-switched lasers, offered at wavelengths of 532 nm, 355 nm and 266 nm, with output powers as high as 38W at 532 nm. The beam quality, high repetition rate and high output power of AVIA lasers combine to minimize the heat-affected zone in micromachining applications.
These characteristics, plus their proven reliability and low cost of ownership make AVIA lasers suitable for a wide range of demanding, high-precision processing tasks. These include via drilling, silicon wafer sawing and scribing, solar cell manufacturing and electronic package singulation.
|
|
|
Diode-Pumped Solid-state Lasers are ideal lasers that serve various and diverse industrial market segments. Excellent beam quality, rock-solid stability, incredible efficiency and solid-state reliability make these lasers the clear choice for application. It integrates a ND: YAG laser rod which is efficiently pumped by a radial array of long lifetime laser diode bars, and delivers excellent gain uniformity and lensing performance. It is used for medium power multi-mode applications, precise micro-machining and scientific applications.
|
|
Line generator can be used to display a uniform straight reference line for use in alignment, machine vision systems, construction and process control.In addition, the lenses may also be used on lower power lasers, lenses are available in fan angles of 7°, 10°, 30°, 45°, 60°, 75° and 90° for custom applications.
80-240VAC, RoHS, FDA, CE complied
|
|
Model LCS-DTL-374QT
Complete laser system LCS-DTL-374QT with pulse energy 20 µJ at 355 nm, pulse length of <7 ns operating with external/internal triggering at pulse repetition rates from 0 to 10 kHz, has AC Power Supply.
Features:
Pulsed mode of operation with short pulse duration
Beam profile - Gaussian, TEM00
Application fields:
Mass Spectrometry (MALDI TOF), Laser microdissection, LIDAR, Testing equipment, High Technologies R&D
|
|
Photonics Industries' UV lasers can be configured to produce Q-Switched outputs at 355 nm or 351 nm wavelength in a compact, air-cooled design.
This series of lasers are available in Nd:YAG, Nd:YLF, and Nd:YVO4 platforms. This variety allows our customers to have the ability to select a laser that best fits their application. Based on the inherent properties of the laser crystals, the DC Series provides a large range of pulse energies, pulse repetition rates, and pulse widths.
|
|
|
|
|
|
Models:
- LCM-T-111-20, LCM-T-111-10, LCM-T-111-1 (with output power of 20, 10, 1 mW CW accordingly);
- - LCS-T-11 (complete laser system with 3 mW CW output at 532 nm, has AC Power Supply).
High reliable product industrially verified during many years
>10,000 hours lifetime
Small in size and easy-to-install T-series laser modules provide gas-laser beam quality and semiconductor laser module size.
LCM-T-series module incorporates driving electronics, therefore no additional driver for laser diode is required. In order to operate the module just 3.3 VDC voltage should be applied to input of the laser.
Each LCM-T-series laser module features an active power stabilization control loop. This control loop monitors output radiation of the laser module and maintains it at constant level within wide temperature range. Spherical-mirror laser cavity provides perfect and stable beam geometry. Two-lens output optics yields well collimated, centered and aligned ray of light.
Fan heat sink accessories are available.
All above allows to consider LCM-T-series modules as the best price-to-quality ratio solution for many applications.
|
|
|
|
Solid state lasers: DPSS lasers
