|
|
|
This kinematic mount is designed for ultrathin nonlinear crystal positioning. The mount accepts ring holders of Ø25.4 mm and thickness up to 10.5 mm. The housing is stopped by a rest-flange inside the central aperture of the platform, and is secured by a threaded retaining ring.
|
|
|
The OP104 is a modular approach to passive components. By packaging couplers, splitters, WDM, isolators and polarizers into a rugged module test setups can be better organized with less 'floating' fiber and coiled up patch cords.
|
|
Up to 24 channels (48 fibers).
For installation in 19" racks in distirbutors acc. to ISO /IEC 11801, ISO / IEC 24702 and EN 50173 family. Ready to accept all common types of factory or on-site assembled cables. Especially suited to accept our factory assembled OSI PreCONNECT® cabling system.
Two types are available:
fixed installation
telescopic complete-pullout
|
|
Flip Mirror Holder KSH 90
The swing leaf bears a wobble plate with an adjustment range of ± 0.5° and an aperture of 2". Optics with a thickness > 12 mm (normally 2" mirrors) are fixed with a plastic screw.
Optical components (such as mirrors and beam splitting paltes) having a thickness of only 10 mm can be pressed aganst three stops with the enclosed two clamping shoes and thus fixed.
The swing angle is 45°, the repeatability < 100 µrad. The swing time of the motorized version is about 1 s.
- for use with SYS 90
- black anodized aluminium alloy
- mountable onto pin or slide
- manual operation or motorized
|
|
The Laser Mech Lens Mounting System solves the problem of lens removal for replacement and inspection. By using a simple cartridge mounted lens inserted into a side slot in a permanently positioned manifold block, the problems of the traditional threaded, axially inserted lenses are avoided. This innovative mounting method allows removal and replacement of the lens in seconds with no readjustment of the optical alignment and without the removal, replacement or disassembly of any other part of the optical system.
Each assembly consists of a lens mount manifold block with very fine, adjustable lens centering screws and a spring-loaded, lens holder assembly to hold the lens. The lens holder contains all the seals necessary to pressurize the space beneath the lens for use with the Gas Jet Manifold.
|
|
|
ROLYN Mirror Mounts are designed to give the very best combination of economy and performance. There is no glass-to-glass contact. Clear aperture obscuration caused by the plastic mirror holders is minimal. These three holders form an adjustable rigid orthogonal kinematic mount for the mirror which resists vibration and handling. Black anodizing minimizes reflections. Mirrors are not supplied with the mount.
|
|
As you scan through our various mounts we have a selection of Single Circular Filter Wheel Mounts, a Universal Stand Mount, Compensated Circular Filter Mounts & a 8 Position Filter Mount.
* Compensated Linear Filter Mounts
* Degree Scales
* Mounts
* Storage Boxes
|
|
Data and energy
Unrivalled worldwide, eks Engel presents a new Hybrid Splice Box inside the FIMP product line that makes it possible to combine data and energy.
Furthermore, a new version with a SC-RJ coupling which allows combining multimode, singlemode and POF in one plug will be presented. The front panel of the Hybrid Splice Box can be outfitted with up to four RJ45 Click&Snap-, or alternatively with two Smart Hole-Modules.
|
|
|
The Universal Mirror Mount/Platform 840-0052 is suited for precise adjustment of standard mirrors which can be directly bound to it. The mount may be used in horizontal position as a tilt table. Then it can be used to align opto-mechanics around two axes. For such mounting the mount has an M4 hole on its back
|
|
The Laser Mech Lens Mounting System solves the problem of lens removal for replacement and inspection. By using a simple cartridge mounted lens inserted into a side slot in a permanently positioned manifold block, the problems of the traditional threaded, axially inserted lenses are avoided. This innovative mounting method allows removal and replacement of the lens in seconds with no readjustment of the optical alignment and without the removal, replacement or disassembly of any other part of the optical system.
Each assembly consists of a lens mount manifold block with very fine, adjustable lens centering screws and a spring-loaded, lens holder assembly to hold the lens. The lens holder contains all the seals necessary to pressurize the space beneath the lens for use with the Gas Jet Manifold.
|
|
Lens holders are designed to position miniature lenses over CCD/CMOS imagers with high degree of accuracy. Lens holder must keep the lens optic axis centered on the active area of the imager. It must also keep the lens axis perpendicular to the imager surface. Some lens holders also provide special features for holding IR cut-off filters and optical low-pass filters. Lens holders are precision-molded with special plastic materials.
|
|
|
|
|
|
ECO-1 stand is the ideal support for all types of barriers of the SB series and for MDG0001 mirrors. It is practical and economical and is anchored to the floor by means of two 10 mm diameter metal anchors (not included). The base is composed of a 15 mm thick burnished iron plate, with holes for the anchors. Each post comes with 4 sliding inserts already positioned in the side splines of the burnished element. The brackets supplied with the fences or mirrors shall be fixed to such inserts. If one of the other splines is to be used (the extruded element comes with one spline per side), simply remove the plastic cover from the post, recover the inserts and insert them where desired.
If the application is particularly demanding from the viewpoint of mechanical stress, an 'L' reinforcement bracket (code: ECO-L) can be fixed between the post and the base. Normal application do not require the reinforcement bracket since the aluminium extruded structure is anchored to the iron base by means of a large screw, which goes approximately 100 mm inside the extruded element and the head of which is hosted inside the base plate.
|
|
Built using proprietary manufacturing processes and custom in-house metrology that result in ±1-nm thickness precision, these etalons lead the industry with superior free-spectral-range tolerances to as tight as ±0.001 GHz. They are supplied to leading OEM customers and researchers worldwide in the telecommunications, aerospace, laser research, and defense industries. With temperature tuning, solid etalons enable precise alignment to the telecommunications ITU grid without active alignment during packaging.
Multi-cavity etalons with flat-top filter functions are also available. They utilize our unique epoxy-free-bonding (CADB) technique for 100% optically transparent optical paths and zero bondline thickness.
|
|
|
Research Electro Optics, Inc. (REO) offers air-spaced etalons that feature industry-leading precision together with proven volume manufacturing and state of the art functional metrology. Our proprietary adhesive-free bonding process ensures that our open frame and hermetically sealed air-spaced etalons will exceed all Telcordia requirements for durability and reliability. Available with any combination of reflectivities, in Fabry-Perot or GT configuration, REO's etalons have many applications including precision wavelength locking, interleaving, and dispersion compensation. Our etalons are manufactured to have a transmission or reflection peak or edge at a specified frequency, with a specified Free Spectral Range, at a specified incident angle. REO's hermetic etalons have guaranteed ultra-low temperature drift.
|
|
|
|
|
|
System installation kits allow the experimenter to provide experimental setups within shortest time. Furthermore, it is guaranteed that, when using the existing system components with a future series production, the same kits can be employed. This is particularly important for the industrial research. With the available profile rails, the four different side profiles and the corresponding riders, beam handling heights of 40 mm (SYS 40), 65 mm (SYS 65) and 105 mm (SYS 90) can be reached.
- rail/slide system allows rapid changing of components
- for linear, 2- and 3-dimensional setups
- universal - for laser and fibre-optic technology and classical optics
- for laboratory experiments and series production
- components of the SYS 40 can be combined with System SYS 65 and micro-systems from other suppliers
A wide range range of mounts and adapters make sure that practically all optical components can be properly mounted. The compatibility of these systems to systems from other manufacturers, who followed the OWIS standard, is not less important.
Mechanical and optical starter sets are composed to meet initial requirements. These contain the most frequently needed mechanical or optical components in a rugged convenient case for transport and storage.
|
|
The inner values of the FIMPXL are really convincing and the installation is quite simple and done very fast.
FIMPXL is ready for splicing and it already contains splice tray, couplings, pigtails and cable gland. Regarding different couplings, you can choose from SMA, ST, SC, LC, FC-PC and E-2000. The front panel and the splice cassette can be removed for splicing and since the cassette is magnetic, it can easily be fixed onto a splice unit. The cassette has got a hole for splice units with a bolt.
The powder coated stainless steel housing is also magnetic so that the splice box can easily be affixed to another housing or to a switch cabinet in case of no different tray. Furthermore, FIMPXL has got a clip for DIN rail mounting (35mm) and a kit for wall fastening. Thus, there are space-saving and flexible solutions for mounting our FIMP.
|
|
Mit der Serie FIMP stellt eks Engel eine industrielle Kompakt-Spleissbox für bis zu 12 Lichtwellenleiterfasern vor. Die Box ist spleißfertig bestückt und integriert Spleisskamm, Spleissablage, Kupplungen, Pigtails sowie die Kabelverschraubung. Als Kupplungsvarianten stehen SMA, ST, SC, LC, FC-PC und E-2000 zur Verfügung. Alternativ ist die Spleissbox auch variabel bestückbar.
Durch seine gleichermaßen kompakte wie robuste Bauform und dem Gehäuse in Edelstahl ist die Spleissbox für den Einsatz im rauen industriellen Umfeld prädestiniert. Zur schnellen und problemlosen Montage wird die Spleissbox per Clip auf eine 35 mm-Hutschiene befestigt. Zudem ist ein Kit für die Wandmontage erhältlich.
|
|
|
ROLYN Optical Flats are now available with certifications of 1/10 wave length accuracies (.000002"). These are made of special fused silica with ground edges with slight safety chamfer and with the second surfaces pitch polished for better visual inspection of the patterns created when in contact with other surfaces. These flats are used in determining surface qualities in optical shops, instrument fabrication, machine and experimental shops, for laser usage and a multitude of other applications. A must for inspecting and checking your "Jo" blocks.
|
|
Optical flats are used for testing and evaluating other optical elements. An interference pattern is formed in the air between the flat and the object being evaluated. The pattern consists of alternating bright and dark bands or fringes which are contour maps of the air space.
* Optical Flats - Fused Silica
* Optical Flats - Pyrex
|
|
Adjustable Polarizer Holders
Dimensions most compact among 1" optics mounts
Both tilt and tip are controlled from aside the optical path
Ideal for dense optical schemes
Fine adjustment screws with 0.25mm pitch
Hardened inserts under adjusters
Original stabilized L-shaped flat spring
Accepts optics upto 10.5 mm thick
Tilt/tip travel range ±2.5°
Roller bearings
Lockable. Continuous 360° rotation
Horizontal and Vertical mounting
Mounting holes M4 on three sides
|
|
|
Melles Griot offers a wide range of tabletops and platforms designed to suit your applications and environment. Three important parameters need to be considered prior to choosing a table. First, the isolation requirements relating to vibration, acoustic noise, electromagnetic interference, and thermal fluctuations; the function of the tabletop with respect to its stiffness, flatness, and surface quality; and the ergonomics of the whole setup.
|
|
1HT - Honeycomb Table Tops
Sandwich structure with steel honeycomb core
4 - 6 mm ferromagnetic stainless steel top skin with a pattern of M6 holes spaced by 25 mm
Surface flatness ±0.1 mm over any 1m² area
Laser Port (optional)
Non-Ferromagnetic Table Tops are available to special orders
|
|
TMC's innovative research and development guarantee the highest
level of vibration control with its optical tops, optical tables, optical
breadboards and supports. Several damping, skin thicknesses and
material choices ensure that the most appropriate product can be
custom designed for your application.
|
|
Kinetic Systems has been at the forefront of the vibration isolation and optical table market in the US for over 30 years and is a world leader in the development and application of advanced low frequency vibration control systems that provide vibration-free work environments for sensitive equipment. Experienced Kinetic Systems engineers routinely solve a wide variety of complex vibration isolation problems for customers in applications as diverse as aerospace, medical research, laser R & D, and semiconductor equipment.
- Optical Tables
- Workstations
- Isolation Legs
- Table Accessories
- Custom and OEM Products
|
|
| ... products without technical information |
| |
|
|
Workshop tools and mountings for optics
