thermal transfer ribbon / wax-based
thermal transfer ribbon / wax-based

Maximum quality High level protection for the print head High speed printing capacity

thermal transfer ribbon / resin-based
thermal transfer ribbon / resin-based

Durable Resistant in contact with solvents Heat resistant

adhesive label
adhesive label

Multiple materials, adhesives and measures which allows you to personalise every label detail.

printed label
printed label

Customize all kind of special material, colours, paper-weights

RFID label
RFID label

Wide variety of RFID intelligent labels, specially designed for concrete market segments.

inductive electronic identification system
inductive electronic identification system
ERB 1 series

The ERB 1 series from BDC electronic is designed to assign an identification code to the fixed or mobile parts. The cold holder is the sender and it can be operate without the power supply. The code reading is finished by the reading ...

adhesive label
adhesive label
Class 3A

Width: 7 mm - 200 mm
Length: 8 mm - 200 mm

All labels listed are the new labels updated to the revised editions of the laser safety standards EN / IEC 60825-1 (2001). The changes are as follows: New labels for the new Classes: Class 1M, 2M and 3R Note that there are two labels ...

security label
security label
LSWN-CLINIC

Width: 210 mm
Thickness: 3 mm
Length: 297 mm

The Lasermet LSWN-Clinic is a A4-sized signage which encompasses all the three signs necessitated by the Health Care Commision. This signage, manufactured with the appropriate symbols and coloring, can be installed through drilling, screwing ...

security label
security label
LSWN

Width: 248 mm
Thickness: 3 mm
Length: 350 mm

The Lasermet LSWN, specifically designed for Class 4 type of lasers, is an acrylic laser warning sign that can be installed through drilling, screwing or taping (with a double-adhesive tape) onto/into the wall of the restricted area. This ...

adhesive label
adhesive label

Width: 30 mm - 100 mm
Length: 40 mm - 150 mm

The Adhesive label fabricated by Ferplast, is a label roll that features an approximately outer diameter of 200 mm. This tool is made available in different sizes from 30 mm x 40 mm -10 0mm x 150 mm. In addition, it highlights an in-coil ...

thermal transfer ribbon
thermal transfer ribbon

Ferplast produces ink ribbons suitable for use in thermal transfer of printers. These ribbons are compatible with the Toshiba B-SX4T printer. Sizes vary from 55mm x 600mt to 112mm x 600mt, depending on the ink ribbon type.

signaling tape
signaling tape
080-9111-011

The Trassenwarn band comes from a range of cable laying accessories manufactured by Thaler. This particular cable line warning strip has a width of 40mm, and a length of 250m. The strip weighs about 0.9kg. The strip's purchase number ...

thermal transfer ribbon
thermal transfer ribbon

Videojet’s range of Thermal Transfer Overprinter (TTO) ribbons are designed specifically to meet the challenges of flexible packaging applications. Featuring backcoat technology, Videojet ribbons are optimised for use with Videojet printers, ...

cable clip / PVC / marking / snap-in
cable clip
EC series

The EC series offers a wide array of cable marking clips that is characterized by their marker tongues that expands to match with different cable diameters. They are also capable of retracting to secure wires in their proper position. ...

See the other products
Shanghai Richeng Electronics
cable clip / PVC / marking / color-coded
cable clip
EC series

These are made of the Rohs approved PVC. It is oil resistant and can operate at temperature up to 85℃. It has elasticity . It can be self adjusted to the cables easily. It has one size EC cable marker which can be easily used on various ...

See the other products
Shanghai Richeng Electronics
flat cable clip / PVC / marking / snap-in
flat cable clip
EC-J

The EC-J of the EC series is manufactured by RCCN. It is a flat wire cable marker with a length of 5mm. The materials of the cable marker comply with the requirements of ROHS standards. The EC-J operates with a maximum temperature ...

See the other products
Shanghai Richeng Electronics
cable clip / PVC / marking
cable clip
ECB series

How to use:insert RCCN’s cable marker Advantage:save time and convenient to find cable marker ECB-1single opened, ECB-2double opened

See the other products
Shanghai Richeng Electronics
cable marking plate
cable marking plate
MS series

The MS series is a cable marker strip manufactured by RCCN. This tool is used to mark enormous sizes of cables using a flat cable marker. It was made with PVC material, and is available in MOQ. Moreover, to use this marker strip, put ...

See the other products
Shanghai Richeng Electronics
RFID label
RFID label

We have a smart packaging devices service, able to inform about the product they contain, all along the supply chain. We advise you about correct tags and we provide the packaging with RFID integrated, label or encapsulated for reusable ...

self-adhesive label / roll
self-adhesive label

Neutral self-adesive labels for thermal transfer printers and print & aplly unit.

thermal transfer ribbon / for label printers / wax-based / resin
thermal transfer ribbon / for label printers

Standard features HM-800 - Wax standard HM-810 - Wax High quality HS-500 - Wax Resin standard HT-500 - Resin standard HM-510 - Resin High quality Optional accessories mm 40 x 360 - 450 mt mm 60 x 360 - 450 mt mm 80 x 360 ...

RFID label
RFID label
CB01

RFID label / keyring
RFID label
CC08BJ

barcode label
barcode label

These conding strips from Fiessler are used to provide proper steering control of transport containers in tape conveyor plants. These strips can be programmed as if flaps-, tilt-, sliding-strips These devices contain a variable modular ...

cable marking label
cable marking label
S 9 series

The S9 series is a cable marking label that is fabricated from TEV vinyl covered in cotton. Its adhesive properties are made out of a specialized thermal setting substance. With a standard dimension of 255 x 48 mm, prints are sized 6.3 ...

See the other products
SES-STERLING
cable marking plate
cable marking plate
12 - 25 mm, -50 °C ... +95 °C | PLIO series

The product is made in PVC PE. It has -20-+90°C and -50-+85°C operating temperatures and V0 UL94 halogen-free specifications. The carriers are specifically made to cater the requirements in speedy applications, marking of retro, cables ...

See the other products
SES-STERLING
tamper-evident label / stainless steel / for harsh environments / cable marking
tamper-evident label

Width: 10 mm
Length: 46 mm - 176 mm

The device is made out of a high quality stainless steel to prevent it from rusting. It has a high tolerance to chemicals and acids which also resistant to flame. The device is specifically designed for identifying tubes and cables in ...

See the other products
SES-STERLING
tamper-evident label / stainless steel / for harsh environments / cable marking
tamper-evident label

Width: 4.5 mm
Length: 10 mm - 14 mm

The device offers high quality features made out of stainless steel to prevent the device from rusting. It has a good acid and chemical tolerance and has a flammable-free functionality. The device is specifically designed for identifying ...

See the other products
SES-STERLING
label tag
label tag
max. 52 x 18 x 5 mm, -20 °C ... +60 °C | FB series

These devices are engineered from polystyrene that can handle string impacts. Their labels are made from white cardboard material and are supplied with the units. These products are also made with perforated strippings that are made from ...

See the other products
SES-STERLING
printable label / plastic / for cables
printable label
KS series

Width: 4 mm
Length: 10 mm - 30 mm

High-quality, halogen-free, universal label. The KS 4/x label is used with sleeves KT, KTH, KTH/Q or holders KM, KMH, KMH/Q or KTN on wires, cables, lines or conduits.Available in various lengths and colours.The large printable area at ...

See the other products
MURRPLASTIK SYSTEMTECHNIK
printable label / polyester / self-laminating
printable label
ESL series

Width: 12 mm - 47 mm
Length: 20 mm - 140 mm

Self-laminating, high-quality polyester sheet labels for single-line and multi-line inscriptions. The transparent extension strip sticks over the printable area and keeps the inscription clean and intact. The grid system allows direct ...

See the other products
MURRPLASTIK SYSTEMTECHNIK
thermal transfer label / polyolefin / for cables
thermal transfer label
ST-BT-H series

Length: 20, 32 mm

Polyolefine (PO) heat-shrink conduit, type ST-BT-HHalogen-free Polyolefine heat-shrink conduit for labelling cables with excellent properties for use with the thermal transfer method. This conduit, with its special approvals, is particularly ...

See the other products
MURRPLASTIK SYSTEMTECHNIK
thermal transfer label / for terminal blocks
thermal transfer label
KCK-ECO series

Width: 10, 6.2 mm
Length: 102 mm

The KCK-ECO label plates are made of PE composite material on a transparent carrier film and a 3" core; they can be used as an alternative to the PC labels for terminal block labelling.The individual labels are strips with a length of ...

See the other products
MURRPLASTIK SYSTEMTECHNIK
printable label / paper / polycarbonate / for wire and components
printable label
ELO series

Width: 12.9 mm - 25.5 mm
Length: 27.5 mm - 103.5 mm

High-quality polycarbonate sheet labels may be separated easily at the perforation; they are designed for single-line or multi-line inscribing with the Pictor printer, plotter and laser printer.

See the other products
MURRPLASTIK SYSTEMTECHNIK
thermal transfer ribbon / resin / wax-based
thermal transfer ribbon / resin
AutoLabel™ UltraPrint

The Ultra Print Ribbon, manufactured by Automated Packaging Systems, is a thermal transfer ribbon designed for resistance to scratch and ideal to work with AutoGrafix™ inline overprinting. In addition to that, this thermal transfer ribbon ...

thermal transfer ribbon / resin-based / for label printers
thermal transfer ribbon / resin-based
AutoLabel™ Ultra-V

Genuine AutoLabel Ultra-V Thermal Transfer Ribbon prints high resolution bar codes, text and color graphics. This premium quality ribbon is system-matched for optimum performance on Autobag® Thermal Transfer Imprinters and Print-n-Pack™ ...

thermal transfer ribbon / wax-based
thermal transfer ribbon / wax-based
AutoLabel™ Ultra Wax

The Ultra Wax Ribbon, manufactured by Automated Packaging Systems, is a wax based thermal transfer ribbon designed for coated and uncoated paper classifications. It is used in printing operations that require cost effectiveness, reliability ...

thermal transfer ribbon / for label printers
thermal transfer ribbon / for label printers
AutoLabel™

AutoLabel Thermal Transfer Ribbons are also available in a variety of formulations for special applications, including: Edge and near-edge labeling Security applications Solvent-resistant labeling More

printable label / printer-specific / roll
printable label
AutoSleeve

AutoSleeve Stretch Sleeve Labels Custom fitted for a wide range of container shapes and sizes AutoSleeve Stretch Sleeve Labels feature 360 degree print coverage that allow you to add shelf appeal, highlight a special promotion or add ...

metal clip / marking
metal clip
R

- Preformed reel clips (R-Clip, R-ID clip) - Just the right clip for any non-natural casing - Aluminium (standard) and four standard colours (more on request) - Different alloys and strengths guarantee highest safety in production - ...

metal clip / marking
metal clip
S series

For Automatic Double-Clippers and Single-Clip Machines - Single-clips (S-Clip) - Just the right clip for any bag, netting or casing - Clips on sticks or available on rolls - Aluminium (standard) and four standard colours (more on ...

identification label / paper
identification label

Automatic labelling : *during clipping - The labelling systems ES 5000 (printing and labelling) and ES 4000 (printing and labelling) a label with the current day’s production data is attached to the product during clipping, tamper-proof. ...

identification label / polyester
identification label

Width: 6.4 mm
Length: 19.1 mm

C075X025AAL • For tamper evident applications • For use in laser printers only

See the other products
PANDUIT
dot matrix label
dot matrix label

Width: 0.3 in - 1.4 in
Length: 0.2 in - 1.5 in

High quality, economical solution for wire/cable labeling Use as a wrap-around label or flag style marker for wire/cable labeling Available in vinyl cloth material and supplied on pin fed sheets Panduit labeling software ...

See the other products
PANDUIT
thermal transfer label
thermal transfer label

Width: 12.7 mm - 50.8 mm
Length: 19.1 mm - 50.8 mm

Laser/Ink Jet Self-Laminating Label, 8.5" x 11" sheet, 0.50" x 0.75", Polyester, White

See the other products
PANDUIT
wire and component label
wire and component label

Width: 5.1 mm - 215.9 mm
Length: 9.7 mm - 279.4 mm

Labels can be printed in both laser and ink jet printers Use for identifying patch panels, faceplates, punchdown blocks and other network systems hardware Die-cut labels designed to provide maximum aesthetic quality and ...

See the other products
PANDUIT
security label
security label

Width: 57.2 mm - 88.9 mm
Length: 114.3 mm - 127 mm

Indoor/Outdoor Sub-Surface Printed Adhesive Polyester (Type PPS) High quality signs for use indoors and outdoors Excellent resistance to UV light, chemical atmosphere, and abrasion Excellent life and adhesion properties ...

See the other products
PANDUIT
adhesive label / thermal transfer / printable / security
adhesive label
3M™ 7909S

Width: 20 in
Length: 27 in

Sreen Printable Labelstock for wide range of applications High performance acrylic adhesive for textured surfaces. Excellent adhesion to LSE plastics and textured Powder Coated Painted Surfaces. Automotive Underhood Chemical Resistance 3M ...

See the other products
3M Manufacturing and Industry Industrial Tape
thermal transfer label / adhesive / coated / acrylic
thermal transfer label
3M™ 7871FL

Width: 1371 mm
Thickness: 1.5 mm

2. mil gloss bright white polyester facestock with 1.8 mil acrylic sticky 350 over a 1.5 mil very clear polyester liner Thought to be the business Common - The Tag Carry in which all other people are evaluated. Special blend of Adhesion ...

See the other products
3M Manufacturing and Industry Industrial Tape
barcode label / thermal transfer / synthetic / paper
barcode label

Barcode tags from Zebra make sure reputable, great-good quality generating. Our barcode labeling are overall performance-coordinated to Zebra label and tag laser printers for distinct, reputable result. Pick from: Around 100 pieces of ...

See the other products
ZEBRA TECHNOLOGIES
thermal transfer ribbon / resin-based / wax-based
thermal transfer ribbon / resin-based

Zebra ribbons are quality and durable ribbons that gives you genuine results. One can choose from three formulations of thermal ribbons to match ones applications needs. The wax ribbons are for the standard printing on paper materials. ...

See the other products
ZEBRA TECHNOLOGIES
barcode label
barcode label

These Intermec Duratherm and Duratrans label media items are made to work with quality printing materials and can work in many sizes for stock products. This is made to work with managing challenging spaces where different units can work ...

See the other products
INTERMEC
thermal transfer ribbon
thermal transfer ribbon

Intermec thermal ribbons have been designed for delivering perfect quality in combination with the correct labels and tags. Ribbon formations can meet all industry labeling demands, are capable of handling applications in both mild ...

See the other products
INTERMEC
RFID tag
RFID tag

Width: 1.2 mm
Thickness: 0.5 mm
Length: 2 mm

MAGICSTRAP® is a tiny and robust component for RFID tag. It has excellent RF functions with built-in IC.