|
|
KLEENGUARD* M20 Carbon Valved Respirator
Folded Mask
Mouldable nose seal made of water repellent material – better seal to prevent leakage and reduce fogging on safety glasses
Electrostatically charged as well as mechanical filter
Excellent breathability and filtering performance
Exhalation valve – enhanced comfort through heat and moisture reduction
Carbon Layer to help reduce nuisance odours
Adjustable head straps allows comfortable and secure fit
Individually wrapped for increased hygiene
120mg loading test passed – meets latest regulations – filtering performance even when filtermedia is under heavy particle load
Extra soft inner lining – extra comfort
Easy dispensing - no dust penetration into box
Yellow colour coding – easy distinction of performance level
|
|
S-Series Headcovers & Hoods
With powered and supplied air respirators, breathable air is provided to the wearer: reducing the additional breathing effort required. This increases wearer comfort at all times, but is especially important during periods of strenuous labour.
S-Series Headcovers and Hoods direct a comfortable stream of breathable air to where workers need it most: the head and face. The moving airflow may make hot environments more tolerable while greatly reducing visor fogging. And, when using the appropriate 3M supplied air regulator, the supplied air can also be cooler or warmer when working in hot or cold environments.
In addition to respiratory protection, the S-Series headcovers and hoods also provide coverage of the head or head, neck and shoulders, as well as providing eye and face protection to EN166 – liquid splash and low energy impact.
|
|
|
|
|
|
Apollo 600 HP & LP Supplied-Air Respirator
The Clemco Apollo Series Supplied-Air Respirators are hallmarks of safety, comfort, and performance. Recognizable by their bright red-orange color, Apollo 600 Respirators are easily visible on the job site. Their wide-span window offers the wearer a commanding view of the work surface and broad-scope peripheral vision. The 600 has new features making it comfortable to wear, easier to maintain, and more durable, promising a long service life.
The helmet features:
- an easily adjustable suspension to suit a range of head sizes
- an integral strap for carrying or hanging the helmet
- a replaceable inlet fitting, an area of the helmet assembly subject to high-stress when the user carries the helmet by the breathing tube
- a deep window frame that extends over the cape attachment area to prevent cape wear from rebounding abrasive
- a molded window gasket that securely grips the inner lens and prevents media ingress
- a three-lens system with outermost perforated tear-away lenses to speed the way to clear vision during the blast operation and an intermediate lens to provide additional sealing and to protect the durable fixed inner lens from premature wear
- an integral visor that extends over the tops of the installed lenses to prevent media from lodging between the lenses
- a silver-grey cape that reflects the sun's hot rays
- a comfortable zip-in-and-out replaceable knit neck collar that can be removed for laundering
|
|
An airline respirator (also called an air-supplied respirator or supplied air respirator, SAR) is a respirator that is connected to a source of compressed breathing air (such as an air cart or stationary system) via a high-pressure hose. The air is delivered continuously or intermittently in a sufficient volume to meet the wearer's breathing requirements.
The Vision facemask provides the ultimate in comfort and wearer appeal. Available in three sizes and two filter fitting positions, it provides an outstanding full facemask solution for the widest variety of users and applications.
|
|
Willson Powered Air-Purifying Respirators 6000 Series PAPRs
Rugged to withstand harsh environments and worker abuse
Low-profile belt-mount blower rests comfortably in the small of the back to distribute weight and reduce fatigue - halfmask and full facepiece models available
Marathon¨ face-mount blower offers a unique dual-function filter cover to protect against water splash and seals filter for storage
Field-replaceable power cord reduces downtime and inventory costs
Locking guides prevent accidental disconnection
Choice of single or 10-unit chargers with LED indicators for convenience and cost savings
Will accommodate the 6- or 8-hour fast charging lead acid-gel batteries
Belt-mount and face-mount blowers use the same batteries and chargers
Both the face-mount and belt-mount HEPA PAPRs exceed the NIOSH 4 cfm minimum air flow requirement providing users under operation protection and comfort
Recommended applications - lead and asbestos abatement, welding
|
|
At Survivair, we understand your need for interchangeable respiratory products and systems. Our comprehensive line of respiratory protection equipment emphasizes products that convert easily for specific applications.
Our Pressure Demand Full Facepiece converts to SCBA and Hip-Pac applications.
Our Continuous Flow Full Facepiece and Hoods convert to Powered Air Purifying Respirator uses.
And our Full Facepiece and Half Mask convert to Air Purifying Respirators.
|
|
3M™ Full Facepiece 7800S(M), Medium, Silicone 1/Case
Use with 3M™ Filters 2000 Series, 3M™ Cartridges 6000 Series, 3M™ Cartridges and Filters 7000 Series and powered and supplied air systems against a variety of gases, vapors and particulates according to NIOSH approvals.
|
|
Breathing Star
Type Capacity Connection Weight
m3/h kg
BSP-MT 1 8 G 1/4 13
BSP-MT 2 15 G 1/4 19
BSP-MT 3 25 G 1/4 25
BSP-MT 4 35 G 1/4 35
BSP-MT 6 56 G 3/8 74
BSP-MT 7 72 G 3/8 92
BSP-MT 8 86 G 1/2 109
BSP-MT 200 130 G 1 160
BSP-MT 300 170 G 1 191
BSP-MT 400 230 G 1 267
BSP-MT 500 300 G 1 329
BSP-MT 600 365 G 1 1/2 374
BSP-MT 800 520 G 1 1/2 492
BSP-MT 1150 700 G 1 1/2 636
BSP-MT 1400 850 G 2 730
|
|
|
Dräger supplies high pressure breathing air compressors suitable for all kinds of different applications.Dräger plans, assembles and provides after-sales service for gas filling systems for industry and fire brigades,as well as for small recreational diving compressor systems above 100 L/min.
|
|
|
Self-Rescuers are made for rescue from hazardous situations like toxic gases, smoke, oxygen deficiency. They are particularly designed for rough environments like mining.
|
|
State of the art features such as our 3M Advanced Electret Filter material which offers exceptional low breathing resistance and the 3M Cool Flow Valve that reduces heat build-up, set us apart from conventional respirators on the market.
Combined with an ergonomic design for superior comfort, our wide range of patented technologies guarantee to deliver easy breathing and optimal protection against particle hazards.
|
|
3 noses bridges: Us version: colour coding indicates facepiece sizes, European version: colour coding indicates type of respirators.
Nose bridge provides user increased comfort and fit.
Lightweight, humidity-resistant, hypoallergenic filter media for low breathing resistance, maximizes wearer comfort and respirator service.
Low breathing resistance increases wearer comfort.
Durable suspension straps eliminate pre-stretching and staples do not penetrate filter area.
Traditional cup style available in N95/P95 filtering media (Flat-Fold N95).
Models with boomerang nose seal or full sealing flange provide user with added comfort and increased protection.
Meets NIOSH 42 CFR 84,EN and AS/NZS 1716 standards for effective protection against particulate hazards.
|
|
Especially emergency situations and working in extreme environmental conditions require easy to use escape sets.
Everywhere, where breathing is difficult or in danger, Dräger looks and finds the solution.
|
|
|
MSA offers a full range of equipment for escape purposes. The most economical solution is a filtering device. It is perfect as long as you know about the type, the properties and composition of the hazardous agent in the ambient air.
|
|
|
Through its Sabre brand Scott Health and Safety was a pioneer of Escape Breathing Apparatus technology. The original concept for the coveted Sabre ELSA - Emergency Life Support Apparatus was developed to help avoid unecessary loss of life, like that seen during the 1982 Falklands war. During this conflict it was found that 90% of fatalities onboard ship died through smoke inhalation. The result of research conducted by Scott Health & Safety led to the development of the 'ELSA', which has now become industry standard terminology for Escape Breathing Apparatus. The ELSA is in now in its third generation and is available in either positive pressure or constant flow models giving 10 or 15 minute escape periods.
|
|
A wide variety of different Air Purifying Respirators and filters - the right product for every application!
Our range of light respiratory protection products covers everything from Particle Filtering Facepieces to Powered Air Purifying Respirators.
Powered Air Purifying Respirators
Whenever you need respiratory protection with high comfort, a Powered Air Purifying Respirator is providing you with a high level of comfort.
Low breathing resistance and the constant air flow will guarantee the best comfort possible in such applications.
|
|
The Turbo-Flo can be used as assisted or unassisted fresh air breathing apparatus. As unassisted fresh air breathing apparatus the air is drawn through a hose of max. 18 m. As assisted fresh air breathing apparatus, the Turbo-Flo blower is connected.
- Sturdy design
- Easy to carry and use-simple to maintain
- Good mobility, twin breathing tubes over shoulders
- Turbo-assisted breathing (with Turbo-Flo blower)
- Independent of power supply (without blower)
|
|
|
The extremely lightweight 6000 series full face masks feature a wide field of vision, and low maintenance design for maximum comfort and simplicity.
|
|
Promask 2 Negative Pressure Facemask
Promask2 is a twin filter full facemask providing excpetional balance with minimal pressure against the face. The airflow management utilises the inner mask to prevent the visor from misting and to ensure C02 is flushed rapidly and efficently, reducing wearer fatigue. even for long periods of use. Promask 2 incoporates a wider panoramic visor to maximise the field of vision and a front-mounted speech diaphragm for easy communication with colleagues. Moulded in grey silicone, Promask 2 accepts the Pro2 range of cartridge filters, which have individual covers to maximise working life by protecting the filter media from splashes, sparks and contaminents.
*Low Profile
*Clear Speech Transmission
*Soft, Pliable Silicone
*Clear Inner Mask
*Available In 2 sizes
*CE Aproved EN136
|
|
3M Reusable Half Masks
3M 7500 Series Fully Maintainable Half Masks offer unrivalled comfort from the exceptionally soft silicone face seal.
3M 6000 Series Half Masks incorporate a lightweight elastometric face piece, and is a less comfortable option when compared to the 3M 7500 Series Half Mask.
3M Maintenance Free Reusable Respirators
3M 4000 Series Respirators incorporate a unique design with integral filters. They are exempt from the maintenance requirements of the COSHH regulations if disposed of within the month.
|
|
Respirators
50610
Folded respirator. Approval FFP1 (EN 149:2001) – CE 1024 -individual packaging
Colour: light blue
50611
Folded respirator with exhalation valve. Approval FFP1 (EN 149:2001) – CE 1024 - individual packaging
Colour: light blue
50630
Folded respirator. Approval FFP2 (EN 149:2001) – CE 1024 - individual packaging
Colour: dark blue 50630 or black 50632
50631
Folded respirator with exhalation valve. Approval FFP2 (EN 149:2001) – CE 1024 -individual packaging
Colour: dark blue 50631 or black 50633
50634
Folded respirator with exhalation valve. Approval FFP2 (EN 149:2001) – CE 1024 -individual packaging
Colour: Camouflage
50641
Folded respirator with exhalation valve and active charcoal against odours and organic vapours. Approval FFP2 (EN 149:2001) – CE 1024 -individual packaging
Colour: grey
50651 - against viruses and bacteria
Folded respirator with exhalation valve. Approval FFP3D (EN 149:2001) – CE 1024 - individual packaging
Colour: yellow
|
|
RPN952 and RPFN952 Features:
- Exhalation valve reduces heat and humidity
- Adjustable nose band
- Low profile
- Dual fixed strap
|
|
Scott Health & Safety's range of half masks include twin and single filter masks. All Scott half masks use replaceable standard filters for cost-effectiveness. Pro² filter cartridges have a safety bayonet fitting and Pro2000 canisters have a 40 mm thread connection.
Scott half masks provide comfortable protection in a wide range of applications, from chemical treatment to agriculture. A choice of sizes each with fully adjustable anatomic fit and in skin-friendly materials ensures wearer comfort and safety.
Key Features
Comprehensive range of highly efficient Scott gas, particulate and combined filters available
Ready-Paks contain a mask and filter cartridges ready to use
Combines high quality materials with maximum user comfort
|
|
|
Survivair is a manufacturer of world-class respiratory protection equipment. Our name means safety. Saving lives and property. Protecting firefighters from smoke, fumes, and toxic gases. Providing respiratory protection from airborne workplace hazards. For more than three decades, Survivair has manufactured the finest, most dependable respiratory equipment money can buy.
|
|
Willson Premier 6100 Series Respirators (NIOSH and EN models available)
A fit for every face and a respirator for every job.
Easiest-breathing respirator of its type loaded with features and benefits to maximize wearer protection and comfort.
Available in three sizes and has a soft sealing flange with rolled edges for increased wearer acceptance.
Head straps adjust at the crown for easy fitting and unobstructed vision.
Low profile nosepiece allows for compatibility with eyewear.
Perspiration port reduces facepiece slippage and skin irritation.
Replaceable parts and convertability to supplied air or PAPR configurations. allow versatility and reduce expenses.
NIOSH, EN and AS/NZS 1716- approved models available.
|
|
RPN952 and RPFN952 Features:
- Exhalation valve reduces heat and humidity
- Adjustable nose band
- Low profile
- Dual fixed strap
|
|
3M™ Full Facepiece FR-M40B-10, Small 1/Case
This full facepiece respirator is approved to NIOSH Chemical Biological Radiological Nuclear (CBRN) requirements in conjunction with 3M™ Cartridge FR-15-CBRN. It offers many unique features designed to increase comfort and wearability for the civilian responder.
|
|
|
Oxygen escape sets should be carried when toxic gases can be present or the atmospere can be oxygen deficient.
|
|
3M™ Filtering Facepiece Particulate Respirators
Use a variety of patented technologies and features that enable them to filter a broad range of particles and nuisance odors. They are approved under NIOSH 42 CFR 84.
|
|
RPN952 and RPFN952 Features:
- Exhalation valve reduces heat and humidity
- Adjustable nose band
- Low profile
- Dual fixed strap
|
|
|
|