|
|
Swedish-manufactured Portable Eyewash
Environmental friendly portable eyewash, refillable after use. The eyewash flush both eyes and face at once approximately for 20 minutes. No hands needed while using (once activated), hence both hands are able to hold the eyelids wide open. The flushing liquid is a sterile, isotonic, 0,9% solution of NaCl. The risk of infections from bacteria (Legionella pneumophila and Pseudomonas) which grow in warm stagnant water is eliminated. This product is complimentary to stationary safety showers.
|
|
The unit is ideal for areas where there is no mains water and is easily transported. Wall mounted cabinet available if required.
KEY FEATURES
ü 18L Stainless Cylinder
ü Eyewash with Trigger operation
ü Dust cover
ü 1.5M flexible stainless steel hose
ü Pressure gauge
ü Safety valve
ü Safety Sign
ü Full instructions
|
|
The BIOQUELL Z is a unique hydrogen peroxide vapour (HPV) generator designed to give rapid, repeatable and reliable eradication of bio-burden within any zone, room or suite.
Hydrogen peroxide has many advantages over other methods of decontamination. It is a low temperature, residue-free process which offers excellent material compatibility (including sensitive electronics). It is environmentally friendly and is highly effective against a wide range of micro-organisms.
This new concept in HPV bio-decontamination has been specifically designed to be simple to operate whilst offering the maximum benefits including:a
Substantial room sterilisation capacity
Rooms/zones need no pre-conditioning
Fast and fully automated cycles via parametric control
Routine or emergency applications
Low operating and maintenance costs
Mobile for rapid deployment throughout a facility
External aeration option to further reduce cycle times
|
|
Emergency Showers
If you work with aggressive liquids or flammable substances, there is always a risk of an accident and
as a result the body or eyes may come into contact with harmful substances. Emergency body and eye
showers provide a first point of assistance should this occur, and are obligatory in many areas of the
workplace.
Full Body or Eye and Face Showers
|
|
Floor mounted shower and eye/face wash with stainless bowl. Self-draining eye and face wash, with automatic pressure and flow control.
Designed to meet the European DIN standards DIN 12899-1 & 2 for Emergency Eyewash and Shower Equipment.
Certified by INSPECTA to meet the ANSI Z358.1 Standard for Emergency Eyewash and Shower Equipment.
|
|
1" Floor mounted shower and eye wash with ABS-plastic bowl. Self-draining eye wash, with automatic pressure and flow control.
Designed to meet the European DIN standards DIN 12899-1 & 2 for Emergency Eyewash and Shower Equipment.
Certified by INSPECTA to meet the ANSI Z358.1 Standard for Emergency Eyewash and Shower Equipment.
|
|
Swedish-manufactured Safety Station
Wall mounted (available as free standing)
Safety station with safety blending system. Shower of galvanized pipes. Shower head in stainless steel. Ball valve, with non-returning spring is operated by a pull handle or pull rod for disabled person. Eye/face wash 3866 with internal flow control and filter in each spray head.
The water supply should be designed for a minimal flow of 90 litres per minute at a pressure of 2,4 bar.
An emergency sign is enclosed with each safety shower.
|
|
|
Stainless steel safety shower. Ideal for any environment. As the unit does not hold water, it can not overheat or freeze. Many optional extras can be fitted
|
|
The first quality conforms to standards ANSI Z.358.1 and DIN 12899
Heated water
Control temperature
Activation by platform
Very resistant
Choice of the capacity of the tank
Great choice of options
|
|
|
A heavy-duty range of emergency showers with an integral storage tank, recommended where warm water is required or a constant supply of water cannot be guaranteed. All outdoor models are pre-insulated and heaters are not fitted to those intended for use in hot climates. Tropical models can be fitted with optional sun shields for extra protection from solar heating.
|
|
|
Tank shower available in 350L, 800, 1000, 1200 & 1500L sizes, suitable for any environemnt including arctic and marine. All with stainless steel frame and walk on platform. Many otional extras available including panels, sump, eyebaths, lights, spring loaded doors etc
|
|
Hazardous chemical spills occur in isolated areas all over the world everyday and, Haws is working to position models like the pressurized 15-gallon 7602.15 personal portable eyewash in these areas, providing a reliable source of safety for the irrigation process.
Features a 15-gallon stainless steel tank.
Protective measures include: air pressure gauge, pressure relief valve, tire-type air fill valve, and bacteriostatic additive that permits storage of water for up to six months.
Uses optional 9007 cart for site transport.
Measurements: 43" high, 12 1/4" diameter.
Fill tank with water to an inside height of 21-3/4", and pressurize tank to 90 psi.
Model 7602.15 is certified by CSA to meet the ANSI Z358.1 Standard for Emergency Eyewash and Shower Equipment.
|
|
|
This self contained portable unit is ideal where a mains water supply is not available. This unit comes with a built in trolley and 2 stainless water cylinders
|
|
Drying with hot air (controlled) of the boots, shoes and gloves. Disinfection system per ozone generator. Startup manual or programmable. Two speeds of heating. valves closing system on each tube. Time of drying: between 20 min and 1H30. Model for 5, 10, 15, or 20 pairs. Model 10 pairs for gloves.
230 V - 16A - 550 to 2200 Watts
|
|
|
Cupboard of drying. Manual or automatic Démarage. Drying with hot air with system of recycling of the air. Cleansing by ozone generator. Capacity from 30 to 70 pairs. Drying of the shoes or the gas masks. Time of drying: between 15 min and 2H00. Exist of them 30, 50 and 70 pairs. Stainless apparatus.
|
|
Double-sided device on wheels. Heated air drying (regulated) boots and shoes. Disinfection by ozone generator. Startup manual or programmable. Valves closing system on each tube. Time of drying: between 30 min and 2H00. . Available in 40, 50, 60, 70 pairs. Stainless steel (Also available in steel epoxy painting).
380 V Tri + ground + Neutral - 5700 Watts
|
|
|
Drying of the cuissardes to the hot air. Startup manual or programmable using a case of order with key closing. Ozone generator for the cleansing. Seal for a washing with large water. Removable tubes supports. Capacity 8 pairs. Stainless apparatus.
|
|
|
Showers in this range are designed for applications where there is no risk of freezing or overheating. They are available with optional eyebaths and can be installed in ceilings, on walls or as free-standing units. Floor mounted showers can be fitted with a foot plate actuator rather then the pull handle on the ceiling and wall mounted units.
|
|
Combination Unit : Manufactured from polyester coated brass and galvanised steel with ABS (Cyclolac) bowl (Model E370) or from stainless steel (Model S370)
Key Features:
Simple shower pull handle operation
Overhead rose
Open eyebath with push operation
2 x Diffuser nozzles with caps
|
|
Self-draining eye and face wash, wall mounted, with automatic pressure and flow control.
Designed to meet the European DIN standards DIN 12899-1 & 2 for Emergency Eyewash and Shower Equipment.
Certified by INSPECTA to meet the ANSI Z358.1 Standard for Emergency Eyewash and Shower Equipment.
|
|
Swedish-manufactured Eye and/or Facewash
Wall mounted (available as free standing)
Each spray head has an internal flow control and filter to remove impurities. Self draining ball valve, with non-returning spring, operated by a push plate. Delivered with collecting bowl in stainless steel.
The water supply should be designed for a minimal flow of 14 litres per minute at a pressure of 2,4 bar.
An emergency sign is enclosed with each eye wash.
|
|
|
Wall mounted eyebath suitable for any environment. Operated by lifting lid, this unit comes complete with intergral stainless frame, 2 diffuser nozzles, flow control and micron filter.
|
|
WALL MOUNTED EYE-WASHERS
LV10 – STAINLESS STEEL BOWL
Hand operating. Wall mounted. Green epoxy paint stainless steel bowl (RAL 6032). Grey epoxy paint galvanized steel piping (RAL 7040). Supply : M 1/2". Draining : F 1"1/4. "Emergency eye-washer" normalized label delivered. Flow : 17 l/mn. Weight : 4,3 kg.
|
|
Horizontal drench shower with a stay open chrome plated brass ball valve.
Designed to meet the European DIN standards DIN 12899-1 & 2 for Emergency Eyewash and Shower Equipment.
Certified by INSPECTA to meet the ANSI Z358.1 Standard for Emergency Eyewash and Shower Equipment.
|
|
|
Built to last, with minimal maintenance, Haws drench showers cover the gamut of installation styles and capabilities.
|
|
Krusman emergency shower, wall mounted
Shower head in stainless steel. Ball valve, with non-returning spring is operated by a pull handle or pull rod for disabled person.
The water supply should be designed for a minimal flow of 90 litres per minute at a pressure of 2,4 bar. Please note, the wall bracket is to be ordered separately.
An emergency signs is enclosed with each emergency shower.
|
|
Heavy duty wall mounted shower. Ideal for any environments, this unit will not overheat or freeze. Comes with rigid safety sign and wall bracket.
1" BSP stainless inlet
|
|
WALL MOUNTED SAFETY SHOWERS
SHOWER - ABS SHOWER HEAD
Hand operating. Wall mounted. Green ABS shower-head (RAL 6032). Grey epoxy paint galvanized steel piping (RAL 7040). Supply : M 1". "Emergency shower" normalized label delivered. Flow : 120 l/mn for the shower. Weight : 4,3 kg.
|
|
| ... products without technical information |
| |
|
|
Decontamination systems, Showers, Eye-baths,...
