|
|
|
|
|
|
Exposure to cold conditions is an everyday occurrence in many northern hemisphere countries. Low temperatures and wind make a strong protective outer layer necessary. Helly Hansen Workwear presents a broad collection of lined windproof winter clothing for craftsmen, engineers, agronomists and other people who spend time in places where the cold is a challenge.
The cold may adversely affect comfort, performance and health at work, so low temperatures also represent a threat to workers' and employers' safety and productivity.
Exposure to wind as well as cold results in rapid heat loss. But garments that protect against the wind must also allow the release of excess heat during hard work. The answer is to choose clothing that helps you maintain an even, comfortable body temperature, by storing heat in the thermal layer and protecting you from the wind. Our insulating windproof clothes have been designed for precisely this purpose.
To provide adequate protection against wind and cold in varying work situations, we offer different combinations of fabric and insulating materials. The garments are made of top-quality fabrics including Oxford nylon, beaver nylon and polyester. Insulating materials like quilting, pile, down, polyester padding or Thinsulate® protect against the cold.
|
|
|
|
|
|
Well-being, productivity and concentration are all adversely affected if we get too warm or cold. Dressing correctlystarts by choosing the appropriate underwear. Helly Hansen Workwear has developed the largest and best collection of workwear underwear to keep you dry, warm and comfortable in all conditions.
When you are physically active your body produces heat and moisture. If your body becomes too hot, it feels uncomfortable and your ability to concentrate is impaired. At the same time, if you perspire and your underwear becomes wet, the risk of excessive heat loss is high. So during varied activities in cold conditions you are likely to become too warm and then too cold, depending on the intensity of activity.
This also happens in summer when temperatures are higher. Heat and perspiration can often feel uncomfortable and irritating. Reduced comfort at work will affect your well-being and efficiency. At the same time we know that your ability to concentrate is impaired even by small changes in body temperature. Keeping comfortable, warm and dry is therefore also important for safety reasons.
For several decades Helly Hansen Workwear has developed underwear for extreme sports and expeditions. Based on this experience we have launched Helly Hansen Bodywear, a unique workwear underwear collection. Helly Hansen Bodywear is made from polypropylene and absorbs no moisture, provides excellent ventilation and pushes perspiration away from the body. As a result you avoid cooling down during breaks or periods of lower work intensity.
|
|
|
|
|
|
Personal Air Conditioners (PACs) use filtered compressed air and vortex tube technology to keep workers comfortable in extremely hot or cold areas. PACs use the Model 855 or 857 Diffuse Air Vest to distribute cooled or heated air over the upper body.
Applications:
Unlike "ice pack" type vests, the PAC offers consistent and continuous cooling to minimize heat stress and increase worker productivity in hot surroundings. The vest allows full range of motion with no airflow restrictions and can be worn under welding leathers or protective clothing. The vortex tube unit, worn on a supplied belt, cools or heats inlet temperature by ±33°C
Vortec PAC's provide effective cooling or heating, and are especially popular for workers operating in or near:
- Foundries
- Boiler Rooms
- Steel Mills
- Glass Plants
- Power Plants
- Forging Shops
- Casting Shops
- Welding Operations
- Sand Blasting-
- Paint Baking Operations
- Powder Coating
- Refrigerated Lockers
- Smelters
- Mines
- Asbestos Abatement
- Hazardous Waste Removal
|
|
|
|
|
|
We know that craftsmen need functional and durable clothes.When you are working, freedom of movement and comfort are important. Helly Hansen Workwear has developed a comprehensive range of clothing designed to make the working day easier, safer and more comfortable for craftsmen.
>> Traditional Garments
The collection consists of garments like jackets, trousers, vests, shorts and shirts based on different combinations of polyester and cotton. Polyester provides superior durability, while cotton ensures a high level of comfort. We combine the two materials so that our customers can benefit from both advantages.
Traditional working clothes are made of a twill fabric which far exceeds industrial standards of durability and wear resistance. This has prompted our designers to develop a broad range of functional and comfortable twill garments that also allow optimal freedom of movement. The garments are designed to make the working day as simple and practical as possible. They incorporate the Helly Hansen Workwear Tradesman Pocket System™, with solid, moveable pockets with loops – a feature unique to Helly Hansen.
Innovative IMS™/Click.on™
Besides the traditional polyester/cotton garments, we have a separate range with an interactive module system. IMS™/Click.on™ is based on the growing need to use technological equipment such as mobile phones and handheld PCs at work. Different types of pockets and fasteners can easily be clicked on to the most appropriate places on the workwear. This system provides increased flexibility and access to important electronic tools such as instruments and communication devices, as well as traditional tools.
|
|
|
|
|
|
FLAME RETARDANT GARMENTS PART OF THE 3-LAYER SYSTEM! Contact with open fire, hot surfaces or radiant heat is a reality in many workplaces. In industry, on construction sites and in many other trades it is important to protect yourself and your employees against these threats. HH Workwear includes an extensive collection of flame retardant garments.
>> Helly Hansen Workwear’s flame retardant clothing is approved for use in environments where there is a risk of incidental contact with open flames or when there is a danger of short term exposure to strong radiant heat. The products should be used with other flame retardant clothing. Please contact us for guidance, to ensure you choose the right flame retardant clothes for your needs.
Base and Thermal Layers
The fabric in the flame retardant base layer is 50% flame resistant Lenzing® viscose and 50% wool, which provides insulation as well as flame resistance. The flame retardant viscose fibres have been treated with a mixture of phosphorus and sulphate. The flame retarding treatment is permanent and effective, even after the garments have been repeatedly washed. The combination of wool and viscose provides good insulation properties and a high level of comfort. Flame retardant fibre pile is made of 80% Zirpro®-processed flame retardant wool and 20% flame retardant Trevira SEC®. This process ensures permanent and effective protection. All zips, cuffs, etc, are also made in flame retardant materials. Helly Hansen flame retardant fibre pile has been approved and listed by NATO
|
|
Together Akvarex®, Advance & the Paramedics Rescue Pac® (PRP) provide firefighters and paramedics with the protection and tools they need for challenging missions.
Akvarex® offers protection against radiated heat. Available in different designs and models.
Advance fireman’s clothing offers fire protection in different designs and colours.
The PRP is a specially designed rescue stretcher. It allows injured to be transported to a hospital facility without having to move the body from the stretcher. PRP is versatile and easy to use. Suitable for both horizontal and vertical lifts.
|
|
|
|
|
|
Contact with open fire, hot surfaces or radiant heat is a reality in many workplaces. In industry, on construction sites and in many other trades it is important to protect yourself and your employees against these threats. HH Workwear includes an extensive collection of flame retardant garments.
Helly Hansen Workwear's flame retardant clothing is approved for use in environments where there is a risk of incidental contact with open flames or when there is a danger of short term exposure to strong radiant heat. The products should be used with other flame retardant clothing. Please contact us for guidance, to ensure you choose the right flame retardant clothes for your needs.
The fabric in the flame retardant base layer is 50% flame resistant Lenzing® viscose and 50% wool, which provides insulation as well as flame resistance. The flame retardant viscose fibres have been treated with a mixture of phosphorus and sulphate. The flame retarding treatment is permanent and effective, even after the garments have been repeatedly washed. The combination of wool and viscose provides good insulation properties and a high level of comfort. Flame retardant fibre pile is made of 80% Zirpro®-processed flame retardant wool and 20% flame retardant Trevira SEC®. This process ensures permanent and effective protection. All zips, cuffs, etc, are also made in flame retardant materials. Helly Hansen flame retardant fibre pile has been approved and listed by NATO.
|
|
When working with or handling dangerous chemicals,human health can often be at serious risk from these hazardous substances.
The quality and design of protective clothing intended for a particular purpose will depend among other things on whether the chemical in question is in solid, liquid or gaseous form.
|
|
Knowing their suit is keeping them out of harm’s way allows responders to focus on the mission at hand.
The Trellchem® gastight/Level A suit range includes the highest performing chemical protective clothing in the world. Trellchem® alone offers reusable single-skin suits certified to the most demanding standards in both America and Europe.
Trellchem® suits range from the uncompromising protection and reusability of Trellchem® HPS to the ultimate in limited-use chemical protective wear of Trellchem® TLU.
Trellchem® HPS
Top of the line
Trellchem® VPS
Optimal chemical protection and cost-effectiveness
Trellchem® SUPER
Viton® directly on butyl. Excellent performance record and reference list.
Trellchem® LIGHT
A strong and reliable PVC suit.
Trellchem® TLU
The ultimate in limited use chemical protective wear.
|
|
|
|
|
|
Many accidents are a result of poor visibility, both by day and at night. The question of working clothes providing greater visibility is becoming an increasingly important topic among workers, companies and authorities. Helly Hansen Workwear has a stand-alone visibility collection and offers visibility clothing within most product categories.
Poor visibility poses a threat to many workers, including construction workers, airport personnel, watchmen and emergency units. Increased visibility at work can be achieved by using the appropriate visibility clothing. Workwear that has fluorescent fabric and reflective materials helps you move safely at work.
Helly Hansen Workwear has developed visibility garments in all appropriate product categories. You will find jackets, pants, vests and overalls that increase visibility in all ranges.
Each year thousands of people suffer from traffic injuries. 40% of these accidents occur in the dark and many could have been avoided if visibility clothing had been worn. Surveys show that the use of reflective materials reduces the risk of pedestrians being hit by a car by 85 per cent*. There is also a high risk of accidents in daytime at a variety of sites, including construction sites, along roads and at airports.
|
|
Ideal for day and night use and anywhere high visibility is a priority. Great for construction, airports, emergency response, law enforcement, utility workers, survey crews, railroad workers and directing traffic.
- Bright colors for high visibility
- Available in lime and orange
- Tough, yet lightweight
- Reflective tape styles available
- Class II and class III styles available
|
|
A complete range of ESD safe labcoats made with a special Esd safe fabric specifically suitable for all ESD Protected Area (EPA). These labcoats offer a superior Esd protection combined with the maximum comfort for the operators. Coats are available in two models (man and woman style) and in varios sizes (from XS to XXXL).
Standard colour : white with black conductive thin grid.
|
|
Men’s coat 1731 315 21
Sizes 44-64, 90-114
Stand-up collar, concealed button band with sewn-on buttons, 1/1 sleeve, 1 breast pocket, 2 side pockets, back belt, back slit
Length 110 cm
100% cotton, easy-care, boil-proof Suitable for industrial laundering
|
|
Laboratory Consumables
For testing, quality control and process laboratories, our specialist low lint delicate wipers are the ideal choice to ensure optimum cleanliness. Whereas our comprehensive range of protective clothing, can help protect your products, processes and employees.
For sensitive, low-lint critical wiping we recommend:-
For process protection we recommend:-
9671 - KLEENGUARD* T7 Lab Protective Clothing - Lab / White / M
9672 - KLEENGUARD* T7 Lab Protective Clothing - Lab / White / L
9982 - KLEENGUARD* Vinyl Gloves - 30 cm Ambidextrous / White / M
9983 - KLEENGUARD* Vinyl Gloves - 30 cm Ambidextrous / White / L
For tackling small spills in a controlled way we recommend:-
7341 - WYPALL* L20 Wipers - Centrefeed Roll / White
7342 - WYPALL* L20 Wipers - Centrefeed Roll / Blue
7926 - Roll Dispenser - White
7126 - WYPALL* L10 Wipers - Centrefeed Roll / Blue
7928 - Roll Control Dispenser
|
|
BP FASHION
Designs that go beyond the everyday, and a quality that satisfies all requirements. BP fashion is the up-to-date fashionable collection for everyone who likes to look and feel special.
|
|
BP MED&CARE SYSTEM WHITE
Top-quality professional clothing for every situation, all as part of matching range. BP System white is the ideal clothing solution for clinics and medical practices!
|
|
iking dry suits are developed, manufactured and adapted to the fulfil the needs and requirements stated among divers from the harshest commercial sector, the area of fire and rescue and public safety, from military divers and law enforcement agencies as well as sport and technical divers.
Every gram of a Viking dry suit is therefore designed to provide extreme protection – along with both comfort and hassle free maintenance. All of them crucial and important factors in allowing the diver to focus entirely on the task at hand.
All Viking dry suits are delivered in a dedicated suit bag with user's manual, braces, repair kit and inlet hose.
|
|
Model Description:
TYVEK® Apron, Model PA30LO
* flap
* 2 two bonds to be tied in the back
* Length: 108 cm
* Single size
|
|
CPP™ Heavy-Duty Aprons
Reinforced Neoprene, Hycar, and Urethane for Rugged Wear
CPP Heavy-Duty Aprons offer a broad spectrum of protection. Neoprene styles are resistant to a wide range of chemicals. Hycar styles (a tough nitrile blend) are ideal for grease and animal fats in cold conditions, while Urethane styles offer lightweight comfort and long wear. Available in a variety of weights and colors.
Applications
Meat packing • Chemical processing • Industrial maintenance • Food processing.
|
|
3M have a select range of high quality stylish Protective Coveralls offering breathable comfort and protection you can rely on. With the high level construction quality, the range gives peace of mind for effective use and protection against many industrial hazards.
|
|
Welding jacket exclusively against welding or similar activities .
Available in size S to XXL
|
|
Safe-Knit® Guard
High performance protective sleeves
Using state-of-the-art high performance fibres and anatomic design, Ansell Safe-Knit® Guard protective sleeves provide far more than safety alone. In addition to superior cut resistance, they have comfort that significantly supports productivity. When you need optimal performance from your workers, Safe-Knit® Guard sleeves are the ideal solution.
|
|
Protective Sleeves
Low-Cost Protection for Worker’s Arms
Ansell offers the industry’s most complete line of protective sleeve materials and styles. From vinyl, urethane, and hycar (nitrile blend), to neoprene, denim, and cane mesh, there is an Ansell sleeve for practically every application. Workers are protected against chemicals, snags, punctures, and abrasions. Cane mesh styles offer a high level of cut resistance. Vinyl styles are completely heat-sealed with no exposed elastic.
Applications
Food processing • Meat packing• Assembly • Electronics • General manufacturing.
|
|
Salisbury's Rubber Insulating Sleeves extend protective coverage from the rubber glove's cuff to the shoulder.
Meet ASTM D1051 and IEC/EN 60984
Offered in two different manufacturing processes:
- Dipped
- Salisbury Exclusive -- Molded
Dipped Sleeves are available in three styles:
- Extra-Curved
- Curved
- Straight
- Offered in single or two color combinations
Molded sleeves are available in either Type I or Type II Salcor synthetic rubber
- Available in three solid colors:
- Safety Orange
- Yellow
- Black
Available in regular, large and extra large ASTM sizes.
|
|
Seasonal Light-Duty Blast Suit
The Clemco light-duty blast suit protects the operator from the impact of rebounding abrasive. The suit is a cost-effective alternative to a heavy-duty suit for intermittent or short-term blasting, and for non-blast personnel working at the blast site. It weighs less than Clemco's heavy-duty blast suit. The nylon and cotton construction is easily machine washable. Discarding the light-duty suit after a toxic dust job wastes less money. For rental outlets, the low-cost suit makes it possible to stock suits in sizes to fit almost any customer. (Optional gauntlet gloves protect hands and wrists.)
Advantages
- Weighs less and costs less than Clemco’s heavy-duty blast suit.
- Nylon and cotton construction is easily machine washable.
- Discarding the light-duty suit after a toxic dust job wastes less money.
- For rental outlets, the low-cost suit makes it possible to stock suits in sizes to fit almost any customer.
|
|
Waistcoat 1837 560 32 black
Sizes S-XXL
Canvas 65% PES/35% CO, approx. 310 g/m²
Clip fastenings for width adjustment, can also be worn over outdoor jackets, 2-way zip, reflective details, 1 breast pocket with bellow fold and 1 breast patch pocket for small tools, 2 bellow pockets, detachable Cordura holster pockets, multi-adapter to vary positioning
Holster pockets 1051 890 32 black
For styles 1837 and 1857
One size
2 pairs = pack of 4
As alternative pockets made of waterproof Cordura
|
|
* Fleece lining
* Two cordura breast pockets with flap
* Two cordura pockets with flap
* Water-repellent
* 50% polyester / 50% cotton
* 235 g/m2
|
|
Wet Wear® 550
Heavy-Duty, Lined, Unique Comfort
Wet Wear 550 offers heavy-duty protection, without sacrificing comfort or flexibility. A strong PVC stretch fabric outer layer is bonded to a lightweight liner for warmth in cool weather and perspiration-absorbing comfort in warm weather. Resistant to oils, caustics, alcohols, oxidation, and mildew. Superior cold flex. Washable.
Applications
Handling/transporting bulk fuels and chemicals • Manufacturing • Inspection/maintenance/yard work • Utility repair/inspection • Food preparation • Municipalities • Construction.
|
|
SURVIVAL SUITS AND FLOTATION GARMENTS YOUR BEST LIFE INSURANCE! A good survival suit can mean the difference between life and death. As one of the world’s foremost developers and manufacturers of survival clothing, Helly Hansen Workwear offers a broad range of survival suits, life jackets, flotation garments and special suits. One can never guarantee survival, but we do guarantee that our survival suits meet the highest safety standards.
Lifejackets and Flotation Garments
A flotation garment provides enough buoyancy to keep an unconscious person afloat. Buoyancy foam protects against heat loss and extends survival time during a rescue operation from about 0.5 hours in normal clothes to about 2.5 hours at 10°C. Suits and jackets are designed to be light and comfortable for daily work on or beside water.
|
|
|
|
|
|
There is a growing need for waterproof working clothes that also transport perspiration. The reason is obvious: they are ideal for working outdoors. They keep you dry and comfortable all day – in the sun, the snow and the rain. At Helly Hansen Workwear, we have been making clothing like this for years, using our unique Helly Tech® fabric system.
>> Everybody who works outdoors knows the challenge. You want to keep dry in rain, snow and sleet, yet avoid perspiration and condensation. That is why Helly Hansen Workwear developed Helly Tech®, the unique fabric system used in our collection of waterproof, breathable garments. Today Helly Tech® garments are worn by workers in large and small companies all over the world. They include the Italian Railways, the Danish Postal Service and the Norwegian Police force.
Keeps you Dry
The garments in the Helly Tech® collection release condensation and perspiration, while keeping rain and snow out. More than 20 years of experience with waterproof clothes that transport moisture, in addition to a thorough knowledge of materials and design, have ensured the production of first-class garments.
Helly Tech®-fabrics are constructed either with a thin film that transports moisture or by applying several thin layers of polymers to the reverse side of the fabric. For all practical purposes both systems work well. They are equally efficient at releasing body moisture. At the same time the micro pores in the fabric are too small for water molecules to penetrate from outside. All seams are sealed to ensure that the whole garment is waterproof.
|
|
|
|
Protective clothing
