|
|
|
|
|
|
Central Pneumatic Systems
Becker provides intelligent pneumatic solutions for one or several production machines.
In central pneumatic systems, multiple single pumps on separate production machines are replaced by just a few larger vacuum pumps and/or compressors in a separate room (control room, basement etc.). The units are connected to the production machines via pipes.
Central pneumatic systems provide your machines with on-demand vacuum and blast air, which means energy savings. Noise levels are drastically reduced in employee work areas.
Each pneumatic supply in a centralised system is equipped with its own frequency converter. Thus, the pneumatic requirements of each production machine can be continuously adapted for any given operating point. By average, frequency-controlled units operate at a relative speed of approx. 65%. Overall, this leads to significant energy savings over separate units and devices without speed controlling.
Our central pneumatic systems are always optimised for your specific requirements. Each system is designed and configured especially for the requirements of the given application.
Please find more on our homepage.
|
|
Mini compressing group composed of a compressing block without oil associated with a surge tank, the whole being equipped out of standard with all the accessories of order and safety.
- Nominal capacity: 30 to 300 l/min,
- Maximum Pressure: 5 to 10 bar,
- Tank: 5 to 200 liters.
|
|
|
Atlas Copco proposes a broad range of compressors (screws, pistons, spirals, lobes, centrifugal) for the workshop, the industrial sites and the building sites. Lubricated or without oil, they answer any problems compressed air starting from 0,5 kw.
|
|
ORKAN 900 - compressor (250 l/65.97gal) stationary
SPECIAL EQUIPMENT
- Reset button
- Starting balance
- Manometer for tank pressure
- Air flow tab
TECHNICAL DETAILS
Motor: 400 V / 5500 W
No. of revolutions:
2800 RPM
No of motor RPM:
1190 RPM
Cylinder: 2
Inlet power: 900 l/min.
(237.75 gal./min.)
Effective output: 620 l/min
(163.84 gal./min.)
Sound level: 78 dB(A)
Max. pressure: 11 bar
(156.2 psi.)
Tank: 250 l (65.97 gal.)
Weight: 168 kg (370.38lb.)
Measurements:
H 1120 (43.68) x
B 1600 (62.4) x
D 500 mm (19.5 in.)
|
|
|
|
|
|
The PPI line of diaphragm compressors includes single and multi-stage diaphragm compressor models with displacements to 400 cfm (680 m3/hr) and pressures to 30,000 psi (2000 bar). A variety of head closure designs, power-frames, accessories, and materials of construction allow us to match a diaphragm compressor to most process parameters.
The metal diaphragm group of the diaphragm compressor isolates the process gas from the hydraulic fluid and all lubricated parts to ensure purity. Ultrafram diaphragm technology and proprietary cavity design provide unmatched diaphragm life.
Diaphragm Compressors are used for cylinder filling, hydrogen fuel cell technology, or transfer of high purity or dangerous gases under pressure, without contamination or leakage. Since 1954, PPI diaphragm compressors have been specified to provide non-contaminating, leak tight compression.
A leader in hydrogen fuel cell technology, Pressure Products, Inc. (PPI) has the hydrogen compressor system that is sure to meet your requirements. Developed for reliability and longevity, a hydrogen gas compressor from PPI allows you to have more control over using the element, hydrogen. Our hydrogen compressor efficiency systems are greatly sought after with nearly 70% of compressors being sold by PPI as hydrogen compressors. Recognized for our high-impact safety features that are included with our state-of-the-art hydrogen compressors, and leak-tight compression, there are many benefits to hydrogen fuel cell technology from PPI.
|
|
|
|
|
|
Burton Corblin® compressor
Range of performance
• Inlet volume: 200 m3/h (117 cfm)
• Power: 400 kW (540 hp)
• Discharge pressure: 3000 bar (43500 psi)
The high pressure technology
• compact design. High pressure rise reached in few stages thanks to a design allowing high volumetric efficiencies
• keep gas original cleanliness level. The compression chamber totally isolated proposes the most performing gas confining technology. Contamination-free compression ensured
• ability for protecting compressor environment from a contamination by the compressed gas thanks to its fully isolated chamber
• safety system controlling the eventual rupture of one of the three diaphragms ensuring fluids confinement integrity
• optimized design based on a wide experience with hundreds of compressor packages operating in production sites, laboratories, handling light, heavy, high purity, rare, toxic, flammable, corrosive, explosive, radioactive gases..
• customized technical analysis of your project as soon as initiated
• complete «plug&play» packages integrating control systems, gas treatment equipments and regulation equipments
• easy maintenance operations mostly handled by the operators themselves
• after sales: Serviceman on site, spare parts, compressor up grade and revamping
|
|
|
The greenhouse effect, ozone layer and the planet's changing climate are just a few of the issues that have interested public opinion in recent years bringing environmental protection and energy saving to light. Companies who efficiently produce and use compressed air can contribute to environmental protection through energy savings, as well as decreasing their operation costs. Mattei, as a compressor manufacturer, is also fully aware and involved in these environmental aspects and has based its research on the improvement of the efficiency of its compressors, reaching a higher level of energy saving.
|
|
Haskel International Air and Hydraulic Driven Gas Boosters provide for pressures up to 39,000 psi (2690 bar). Used for virtually all known gases, these boosters are ideal for increasing gas pressure, transferring high pressure gas, charging cylinders and scavenging. Key features include:
Air driven - no electric required
No airline lubricator required
Hydrocarbon free - separation between air and gas sections
Pressures to 39,000 psi (2690 bar)
Wide range of models
Built-in-cooling on most models
Standard and custom systems available
|
|
|
HII's Electric Driven Booster package is ideal for filling or topping off low-pressure and high-pressure bottles. Its two-stage and double acting design uses NO Belts or Pulleys, making it the quietest Electric Driven Booster in its class; only 60 dBA. Air cooled thru its gas barrels inside cooling sleeves reducing the heat of compression for long seal life.
|
|
|
Air-cooled booster-compressor with 1 stage and 2 or 3 cylinders. Many of the basic parts for example piston, cylinder and valves are used in our well known 40 bar compresors. This machine is designed for a minimum of maintenance. The main-usage for this booster is to blow PET-bottles in combination with a screw compressor. The results of a combination like this are competitive prices and max. profit.
|
|
|
The compressors and boosters high pressure Atlas Copco provide compressed air from 25 to 40 bars in standard version, and to 100 bars in overmeasure manufacture. For the FART applications, a special range, named PETPACK, is proposed.
|
|
Advantages of JAB - High Pressure - compressors
Compact construction style
Most effective cooling system
Low compressed outlet temperature
High volumetric efficiency
Maintenance free oil and water separator for all pressure stages with automatic discharge
Oil pressure lubrication including pressure control
Pressure gauges for all stages and oil pressure
Safety valves for all pressure stages
Long life time of valves
Vibration free 3-point assembly
Suitable for air and neutral gas
High quality, robust and reliable
Efficient, economic, easy maintenance
|
|
HIGH PRESSURE type/PDSE,F,G,H,J,K series
Compressor supplying high pressure air
▪ AIRMAN original screw design enable to supply high pressure air.
▪ Suitable for foundation job such as jacking method, down the hole method, and large boring construction.
|
|
|
|
|
|
A revolutionary "customer-oriented" concept
ZD fixed-speed models: 1160 to 4018 m3/h - 40 bar(e) - 683 to 2365 cfm - 580 psig
ZD VSD: 6 variable speed drive models: ranging between 500/1152 m3/h and 1584/3957 m3/h 40 bar(e) - 295/678 cfm and 932/2329 cfm - 580 psig
ZD Xtend plus and ZD VSD Xtend plus: 40 bar (580 psig) + available 7 bar (101 psig) for labeling or capping machines or for instrument air
ZD HAT & ZD VSD HAT: for high ambient temperatures
ZD Xtend RI plus & ZD Xtend RI plus VSD : adaptation to reinjection
Versions : 50 Hz and 60 Hz
A reliable technology:
ZD is the combination of the ZR screw compressor with MD dryer and a fully integrated D-booster. It has been engineered as a single machine with centralized management.
ZD is true innovation based on a "customer-oriented concept" resulting in real savings and benefits:
high quality air, class 0 as per ISO 8573-1, certified by TÜV
installation without foundations
silencing canopy
compact and integrated equipment
very few connections
caring for energy
|
|
|
The P series reciprocating piston air compressors are a versatile, reliable and cost-effective solution for small- to medium-sized needs. The P range includes more than 90 different compact and noiseless models: stationary or mobile, with/without packaged air tank, filters and air dryer, driven by electric motor or gas engine.
|
|
HySTAT™ COMPRESSION MODULE
The pressure at which the HySTAT™ Hydrogen Generator module delivers hydrogen is often suitable for direct use in industrial applications however higher hydrogen output pressures are frequently required for vehicle refueling and power applications.
The standard HySTAT Compression Module, which features a diaphragm compressor, raises pressure to 430 bar (620 psi). Other compressor types, including reciprocating, can be integrated into the module as part of an optional package. The HySTAT Compression Module offers many unique features & benefits:
|
|
Isotherm Compressor (Type RIK)
Isotherm compressors are single-shaft centrifugal compressors with integrated cooling. They are suitable for process air with minimal energy consumption. Over 1,000 systems have been produced, installed and commissioned to date.
Isotherm compressors are characterised by:
* Low energy consumption
* Low noise emissions
* Reliability
* Compact construction
* Centrifugal compressor inline
* Highly developed aerodynamics
* Cooler bundle in the compressor casing.
There are three types of isotherm compressor:
* RIKT: Centrifugal air compressor with volume flows up to 670,000 m³/h
* ARI: Combination of axial/radial compressor for maximum flow volume
* RIO: Process compressor for oxygen with minimal space requirements
|
|
Key Facts for the NASH Liquid Ring Compressors:
· Require minimal care - known for extremely low maintenance.
· Provide years of dependable service and quality liquid ring Compressors due to fewer, generously proportioned parts.
· Reduce power and operating costs of liquid ring compressors, handling higher capacities with less energy/power.
· NASH is the inventor of the liquid ring principle of operation
|
|
The SA Double Acting Liquid Ring Compressor was specifically
designed to meet the stringent medical air requirements for providing
oil free medical air. In addition these units are used to provide
instrument air and requirements of clean air, not contamined by oil
smoke, in laboratories, pharmaceutical and chemical industry.
|
|
|
|
|
|
The compressors compress gases from a lower pressure (usually atmospheric pressure of surroundings) to a higher pressure.
PERFORMANCE: -
Max. compression pressure 11 bar
Max. intake volume flow 30.000 m3/h
ONE-STAGE LIQUID RING COMPRESSORS
for compression overloads up to 1.5 bar.
i.e. for: filter-rinsing in the cellulose, pharmaceutical and chemical industries, saturation of sugar juice in sugar factories,electrolysis gases with increased pressure for combustion plants
TWO-STAGE LIQUID RING COMPRESSORS
for compression overloads up to 3.5 bar
i.e. for: organic gas reactors and anaerobic processes, gas compression in the production of plastics
TWO-STAGE LIQUID RING COMPRESSORS
for compression overloads up to 6.5 bar (with double action second stage)
i.e. for: recovery of vapours in the petrochemical field, liquefying vinyl chloride vapour in the plastics industry
MULTI-STAGE LIQUID RING COMPRESSORS
for compression overloads up to 11.0 bar (predominately double acting stages
i.e. for: ozone compression in the bleaching of cellulose exhaust compression in nuclear power stations
|
|
|
Pneumatic handling, water treatment and any application air low pressure, the compressors and boosters Atlas Copco bring a powerful solution starting from 100 millibars.
|
|
The ZL serie incorporates proven Atlas Copco industrial rotary technology, providing optimum performance, high reliability, long lifetime and reduced maintenance requirements.
Total integration of components such as silencers and drive system results in a complete air system, including all connections and outlet check valve. Combined with low noise levels this makes the ZL the perfect air solution for any industry.
All the benefits of Atlas Copco experience in design and manufacture of industrial compressors are combined in the ZL blower.
|
|
|
Cost-effective Series air compressors are widely used in automotive, chemical, pharmaceutical, mining and air separation industries. The major components of each compressor package, the aerodynamic section, interstage coolers, integral gearing, lubrication system and operating controls have been engineered to deliver reliable performance.
|
|
The medium range compressors of JAB do not pretend to be sophisticated low-pressure compressors, but individual devices that have been developed with the knowledge we gained during the construction of our compressors with a performance up to 350 Bar.
The main characteristics of these machines are oil pressure lubrication, oil pressure control, oil pressure monitoring, shut down in case of lack of oil, oil and water separation with automatic discharge and condensate separation as well as very low noise emitting values.
|
|
The Micro Dia-Vac® pump is the smallest pump offered by ADI providing exceptional quality, reliability and affordability. Available with general purpose shaded pole or brush/ brushless DC motor options. Maximum performance range: 0-13 LPM, 0-28”Hg, and 0-30 PSIG.
Single Head Micro Diaphragm Pump (B161-FP-AA1 shown here)
|
|
|
|
|
|
Compressors
With thousands of compressors in service around the world, Elliott is a leader in gas compression, delivering state-of-the-art performance in a diverse range of industries including petroleum refining, petrochemical processing, cryogenic refrigeration (LNG), oil and gas production, gas compression and other industrial processes.
Elliott’s position on the cutting edge of compressor technology includes a number of engineering firsts. We pioneered high-pressure casing technology, the development of fabricated casings and improved impeller welding techniques. Elliott was among the first to utilize magnetic bearings in critical service centrifugal compressors.
Today Elliott compressors incorporate proprietary EDGE technology with advances in aerodynamics, rotor dynamics, computerized equipment selection, process simulation, and metallurgy, as well as totally engineered oil consoles that supply lubrication to the rotating equipment. We understand that change is essential in achieving and maintaining a competitive edge, and together with our customers and suppliers,we continue to innovate, improve and expand our extensive portfolio of products and services.
Elliott’s full line of centrifugal and axial compressors are available in a wide range of configurations to meet mechanical considerations and process demands. Common configurations include straight-through flow, double flow, side streams, iso-cooling, and back-to-back.
|
|
OIL FREE type/SAD·SWDseries
Compressor supplying clean air excluding oil.
▪ Using special surface treated/ coated twin screw rotor.
▪ By adopting balance piston, exchange cycle of bearing is extended.
▪ Applicable in many fields such as food, medical, precise industry.
|
|
|
Food, pharmaceutical processes which require an air without any oil trace. From 1,5 to 900 kw, the compressors Atlas Copco bring a sure solution. Ranges Z with not lubricated screws are certfiées ISO 8573-1 Classe O attesting the complete absence of oil in the produced air.
|
|
The TANDEM version is a unit made up of two Skid compressors assembled on a single tank as the previous version, with a second compressor and it can work as stock or as support in case the need of air should be higher than the yield of the single compressor.
Particularly suitable for the most common uses requiring air without oil with variable consumption values or requiring a stock.
|
|
|
General's oil less riser mounted air compressors are fully automatic, and virtually maintenance free. OL Series riser mounted compressors are designed to be easily installed either vertically or horizontally to the riser. Units may be installed as air maintenance compressors. All units are UL 2125 Listed. Standard motors are single phase. Three Phase and 50 Hz units are available - consult factory.
|
|
|
|
Other compressors
