|
|
‘Oil free’ single cylinder and bi-cylindrical piston air compressors, also available in silent version with cooler and dryer.
The dry-type (oil-free) OFP series is designed mainly for medical and dental use. This is possible since the compressor group is not lubricated and, on top of that, the generated compressed air is cooled and subsequently dried, in order to eliminate all condensate residue that is produced during the compression process; the air vessel inside surface is treated to avoid any possible contamination
Thanks to the oil free pump the compressor produce high-quality compressed air, without presence of oil residual. With the cooler and dryer version, the air becomes perfectly dry, and therefore eliminates problems with eventual condense.
|
|
|
|
|
|
* Innovation
We are the world’s first certified oil-free centrifugal, which makes us a technology leader in oil-free compressed air. We have the expertise and the unmatched products and service to meet your needs.
* Reliability
No matter what the industry or critical application, Ingersoll Rand’s centrifugal compressors, set the worldwide standards for reliability, energy efficiency and air quality, while reducing the total life-cycle costs.
* Simplicity by Design
Our packaged design makes the compressors easy to install wherever needed, with a single-point air and electrical connection.
* A Systematic Approach to Productivity
We bring our customers unmatched experience in designing comprehensive air systems that cover virtually any need.
* Global Reach, Local Service
Our worldwide network is ready to support you with innovative and cost-effective service solutions.
Scope of Supply
* Complete tested package
* Built-in low pressure lubrication system
* Complete control, protection and diagnostic system
* Mounted intercoolers and aftercooler
* Mounted inlet and bypass valves
* Mounted condensate system
|
|
Standard Pressure 3-25 barg
Power range 700-4000 kW
. 100% oil free air
. Simple, compact design
. Unsurpassed local service support
. Few parts for high reliability and low maintenance
. Longest life expectancy
. State-of-the-art control system
. Energy efficient
Scope of Supply:
. Complete tested package
. Built-in low pressure lubrication system
. Complete control, protection and diagnostic system
. Mounted Intercoolers & aftercooler
. Mounted inlet and bypass valves
. Mounted condensate system
|
|
DYNAMIC series
Power class: 65-370 kWOil-free compressed air at the best possible cost-benefit ratio! The DYNAMIC series offers an oil-free, two-stage turbocompressor series in the power output range of 65 to 370 kW with volumetric flow rates of between 9.7 and 65.5 m³/min and 9-bar final compressing pressure.
The DYNAMIC series is particularly suitable for applications in the medium to large industry sector, for example petrochemicals, refineries, the steel and automotive industries. In other words, wherever an even and extemely reliable compressed air supply is required; and particularly economical to boot!
Advantages:
100% oil-free compressed air
Clearly defined operating costs
Extremely low energy costs for plant operation
Very compact design with extremely high delivery quantity
User-friendly micro processor control
Minimum maintenance cost
Available as an open system or in a sound-insulated version
|
|
Pipeline Compressor
To compensate for the pressure loss that occurs when natural gas is transported long distances in pipelines, pipeline compressors are used to recompress the gas to its original line pressure. In extensively branched pipeline networks in particular, there is a need to vary the amounts of gas transported and the pressure conditions considerably at the compressor stations. This in turn makes high demands on the flexibility of the compressors, which should exhibit a high level of efficiency over a wide range of performance characteristics.
Pipeline compressors are also used in gas collection and gas processing plants as export compressors. The majority of compressors at the stations are driven by gas turbines. However, electric drive motors are being used increasingly as an alternative to turbines.
For these applications, MAN Turbo offers Types RV and Types RM pipeline compressors fully assembled on the base frame.
|
|
|
Radial blowers achieve high delivery volumes with very little pulsation. The frequency inverter integrated on the motor provides the capability of matching volumetric flow exactly to customer requirements. Accessories, such as intake filter or suction sound absorber, are available as optional extras.
|
|
Sterling Service has more than 200 specialised service centres around the world. These are supported by a network of manufacturing centres and 50 wholly owned sales operations. All of this ensures the highest level of service is provided to our customers at a local level.
WHATEVER THE SOURCE OF YOUR ORIGINAL VACUUM EQUIPMENT - STERLING SERVICE SUPPLIES THE SOLUTION FOR YOUR PUMPS & COMPRESSORS.
- Replacement vacuum pumps
- Replacement compressors
- Emergency breakdown cover Repair
- Extended warranty
- Refurbishment
- Service contracts
- Original spare parts
- On-site service
- Re-engineering
- Commissioning-
- Installation
|
|
|
MATTEI has been a leader in the field of air compressors for industrial use for more than 80 years due to the attention it has always given to research and to the specific requirements of its customers. Mattei Rotary Compressors are a result of careful and continuous technological development with the achievement of excellent performance in every industrial area.
|
|
Mattei has been a leader in the field of air compressors for building industry for more over 70 years, renewing its range with even more efficient and compact machines.
These rotary vane compressors have been tested to operate in the most heterogeneous and hardest conditions. The main characteristics are low fuel consumption, reduced maintenance, high performances and reliability.
|
|
Rotary vane compressors, oil-free
Simplicity of design with only one shaft and direct drive produces robust, long-lasting compressors with low maintenance and running costs.
Rotary vane compressors, oil-lubricated
Simplicity of design with only one shaft and direct drive produces robust, long-lasting compressors with low maintenance and running costs.
|
|
|
|
|
|
The vertical Hydrovane compressor is a totally new concept building on the proven vane technology that has been continually developed over the last 50 years.
Key Features
• Maximum air delivery at minimum cost
• Enclosed unit offering significantly reduced noise levels
• IP55 Class F motor directly driving the well proven Hydrovane air end
• Cleanest air available from a lubricated compressor
• Smallest footprint in its kW range
• Lowest noise level
• Electronic control panel
• Designed to look good. Compliments the most modern environment
• Full air intake modulation and automatic stop/start
• Spin off maintenance. Quick, easy and cost effective
• Single speed 4 - 7kW in 7 or 10 bar, 11 - 45kW in 8 or 10 bar
• Regulated speed (RS) with proven ‘air cooled’ inverter technology fully
integrated offering choice of system pressures from 6 to 10 bar combined
with minimal energy consumption
• Extremely efficient at automatically controlling air output
to meet your exact air system requirements
• 7 - 45kW
• Reduced Energy Venting System (REVS).
|
|
A. FEATURES
* Oil free and with no maintenance.
* Pressure up to 2 bar. Final vacuum up to 100 mbar.
* Pressure relief valve, inlet filter and silencer included.
B. APPLICATIONS
* Water treatment.
* Paper industry.
* Electronics.
* Packaging machines.
* Pneumatic conveyor.
|
|
|
This compressor incorporates simple, dependable, rotating sliding-vane technology to provide sustained performance pressures or vacuums for off-loading liquids. A rotary vane compressor takes in atmospheric air through a high performance inlet air filter, and discharges the compressed air at a higher pressure into a cargo tank. The elevated pressure pushes the liquid out through the discharge piping.
|
|
The compressors are designed as fully integrated, compact silenced packages with drive motor, coolers, moisture drains, reverse osmosis system and filtration along with a controller to ensure optimum efficiency and reliability. The Full Feature versions include the integration of environmentally friendly refrigerant dryers to ensure compliance with your air quality requirements and make the best use of your valuable floor space.
The Integrated frequency converter of the AQ VSD series varies the speed of the drive motor in order to exactly match the changes in your compressed air demand, thus using the minimum amount of energy and more than justifying the additional investment.
|
|
The SF scroll series relies on a radically new technology, ensuring economy in operation, extremely quiet running, minimum servicing and space saving, thanks to its simplicity and compact design. It is equipped with a highly efficient IP55 class F electric motor.
These compressors have a minimum of maintenance requirements, 10,000 running hours practically without maintenance while intermediate routine operations remain restricted and easy to perform.
|
|
The SF scroll series relies on a radically new technology, ensuring economy in operation, extremely quiet running, minimum servicing and space saving, thanks to its simplicity and compact design. It is equipped with a highly efficient IP55 class F electric motor.
These compressors have a minimum of maintenance requirements, 10,000 running hours practically without maintenance while intermediate routine operations remain restricted and easy to perform.
|
|
Oil free spiral compressor, single module or multi modules, SPIRALAIR supplies a clan and oil free air, and suits perfectly to installations that require a low noise level, a minimum of maintenance and high air quality.
Power: from 2 to 20 hp
Pressure: from 8 to 10 bar
FAD: from 7.6 up to 95 m³/h
Air receiver: from 32 up to 500 litres
Noise level: from 53 up to 73 dB(A)
|
|
|
The oilless booster compressors from HAUG Kompressoren AG compress technical gases such as air, nitrogen, oxygen, natural gas with suction pressures between 1 – 10 bar(g) up to maximum discharge pressures of 30 bar (oxygen) and 60 – 100 bar (other gases) depending on the type of gas and customer’s requests. Also the recovery of toxic or rare gases is possible (CO, Ar, He, Xe). The picture shows a HAUG booster double compressor installation type QTO, 4 cylinders, air-cooled (3000 x 2085 x 1850 mm, approx. 1500 kg)
|
|
|
|
|
|
The TPS..F turbocharger is a compact turbocharger for small medium-speed diesel engines, large high-speed diesel engines and gas engines in the 500 kW to 3,300 kW power range. Three series offer full-load pressure ratios of up to 4.75, 5.0 and 5.2.
Features:
Three radial high-pressure compressor stages, increased volume flow; different trims
Stabilizer technology
High-efficiency mixed-flow turbine, fully capable of pulse charging
Highly compact design; same outline dimensions as TPS..-D/E1
Single-piece, oil- or water-cooled bearing casing
Internal plain bearings with squeeze oil film, lubricated by engine lube oil
HFO compatible turbine stage, wet cleaning of turbine and compressor
Air intake and gas outlet variants available; variable positioning of casings and flanges
Variable turbine geometry versions available2
Comprehensive qualification test program, including containment test
Benefits:
Full-load pressure ratios of up to 5.2 with aluminium compressor stability
Enlarged map widths, improved compressor stability
Highest turbine performance, very high part-load efficiency
Interchangeability with TPS..-D/E, combined with increased power density
Optimized turbocharger cooling in all applications
Outstanding operational reliability; engine-internal oil supply
Improved operation in harsh conditions
Optimized installation on engine
Increased operational flexibility
Highest operational safety
|
|
The R Booster Compressor is an electric powered reciprocating booster compressor.
The R55 Booster Compressor delivers 20.3 cu. Meters (700 scfm) of air at 350 psi (24 bar) discharge pressure with mine air pressure at intake of 90 psi (6 bar).
The R110 Booster Compressor delivers 40.6 cu. Meters (1400 scfm) of air at 350 psi (24 bar) discharge pressure with mine air pressure at intake of 90 psi (6 bar).
|
|
|
|
|
|
Continuous Air Systems' new line of high pressure boosters offers the latest in technology and cost efficiency.
All four models - 375B, 705B, 1125B and 1500B have revolutionized mining efficiency. They can increase penetration of in-hole drilling by 100% or more, and are capable of boosting present mine air pressure up to 350 P.S.I.G., for straighter drill holes, maximum bit life and faster drilling.
Continuous Air Systems boosters offer the latest computer controlled instrumentation, with easy to read gauges and lights for diagnosis of mechanical shut down problems. The 1125B and 1500B feature manual bypass switches which allow operation of any selection of compressors on the unit. This permits continued operation at reduced capacity if any compressors are shut down for maintenance. All boosters are designed to meet your high productivity requirements and come with a two year compressor warranty.
All CAS air boosters have gone through extensive on-site testing. Any necessary modifications were made when the "B" Series of CAS air boosters was released. Recently, Continuous Air Systems amalgamated all divisions of its company into one location, so that everything from production and design to inventory and sales is under one roof.
|
|
| ... products without technical information |
| |
|
|
Other compressors
