|
|
|
|
|
|
PROFESSIONAL
The production Thin you/he/she has been thought for covering all the possible professional uses of the compressed air, from the small artisan to the less serious industrial employments. Alternative pressers to pistons lubricated by 0,5 to 20 HP, pressers auto-lubricated by 0,75 to 3 HP on reservoir from 2 to 1000 liters various forms and dimensions, they decidedly offer a possibility of complete choice.
TREATMENT
The portable pressers are endowed with reduction gears of pressure with filter and lubricators to be able to use to the best the specific utensils of the sector. The treatment of the air Thin, recommended for the more serious professional uses, it is composed from refrigeration driers, filters for the separation of impurity, unloaders of it condenses, separators water-oil, reservoirs and everything the necessary to optimize the operation of the presser
USE
For the professional employments, Thin it proposes a vast range of accessories and pneumatic utensils: washing, blowing, inflating guns; sanders and smerigliatrici; professional airbrushes; screwers; serraters; spikers, aimers and so many other.
|
|
Advantages
Excellent removal water up to 99.99%
No filter element replacement
Less pressure loss
No effect in performance by time, flow rate, moisture proportion
Simple design and No moving parts
No electric power required
|
|
|
Atlas Copco proposes a broad range of compressors (screws, pistons, spirals, lobes, centrifugal) for the workshop, the industrial sites and the building sites. Lubricated or without oil, they answer any problems compressed air starting from 0,5 kw.
|
|
|
|
|
|
SULLAIR has extended the SMART PRESSURE range.
Practical experience, and customer feed back have all been taken into consideration in the new Pac 80E. With the economy of somany countries currently struggling, this new product will provide the ability to carry out some jobs without the expense of traditional compressors and tools. Smart Pressure range utilise an alternative pressure to the most common 6-7Bar compressors and hand held tools. Engine size has also been reduced from the common 20-30hp diesel engine to a 6.5hp petrol engine. Footprint size has been drastically reduced, so much so that it will now easily fit into a small van or hatchback car. Fuel economy is greatly
enhanced, thereby reducing the daily running costs.
The Smart Pressure range of tools includes a 22kg Paving Breaker, 10kg Demolition Tool, and now a 5kg chipping hammer. All produce power, and production performance equivalent to the same sized standard pressure tools. In addition, and to help protect the operator, Vibration is significantly reduced. Storage, when not in use has been enhanced by having the ability to be stacked, again an important issue for Rental
Companies. It is, for certain, that the standard pressure range of portable compressors and tools will continue from Sullair. The increased Smart Pressure range of tools with Pac 80E will give all purchasers the opportunity to increase their product offering to their customers based on the actual requirement of the job. By doing this it will enhance the utilisation of all the models in their fleet, this will include standard pressure equipment.
|
|
Screw compressors produce the required air delivery, which is stored in a compressed air receiver. This compressed air is then compressed to the required 40 bar operating pressure by booster compressors and is then stored in a high-pressure receiver.
Except for the screw compressor fitted upstream, the complete FLEXPET system with booster(s), switch cabinet, adsorption dryer, receivers and high-pressure filters is fitted firmly onto the base-frame and comes completely wired and piped.
|
|
|
|
|
|
Ingersoll Rand offers a wide range of innovative solutions designed specifically to address the production challenges of PET bottle blowing industry. Today you can choose between several highly advanced air compression technologies that best meet the unique production requirements of your plant.
At the heart of our product line we offer a range of innovative 4-stage centrifugal and reciprocating compressors that provide a perfect blend of efficiency, performance, and durability. Why? Because relentless innovation drives productivity and our advanced compressor solutions give you the edge to compete successfully in the global marketplace. Companies like yours must keep production lines running smoothly, production interruptions whether scheduled or unscheduled are costly.
So, with a thorough understanding of the dynamics in todays strenuous production environment, Ingersoll Rand unveils ground-breaking 4-stage centrifugal technology and 4-stage reciprocating technology for unmatched reliability and performance. Together with our other highly regarded reciprocating solutions, these superior technologies offer the PBM Industry:
|
|
|
ELGI's new generation PET air compressor features many technical advances that combine to enhance operation with superior efficiency and durability, along with rugged performance in the demanding bottle-blowing environments. The uniqueness of Elgi PET is that the suction unloader is of a simpler design compared to the diaphragm type versions which require periodic maintenance. The compressor, with in-built moisture separator, is also integrated with down- the- line filters and dryers to ensure the air is completely dry and clean.
|
|
AM
Pressure booster
translation 1:2 to 1:5,
max. output pressure 60 bar
|
|
- High pressure capability - up to 25,000 PSI.
- Boost directly from unregulated high pressure gas cylinders
or pipelines.
- Maintain gas purity.
- One-man portable.
- No electrical or cooling connections needed.
- Intrinsically safe.
- Boost virtually any noncorrosive industrial or laboratory gas.
- Simple maintenance.
- Mount in any position.
- Weatherproof.
|
|
|
Air driven gas boosters are suitable to pump or compress almost any kind of gas, from shopair to oxygen. They are available in all kind of models, for example single stage, double acting etc. Applications are filling gasbottles and compressing and storing high pressure shopair for testing valves, etc.
|
|
The Hydratron range of Air Operated Gas Booster Pumps are designed to boost bottled gases such as air, nitrogen, helium, hydrogen or methane upto higher pressures. They can be used for pressure testing or for pre-charging accumulators and down hole tools. Being air operated they are inherently safe and can be used in fire hazardous areas.
The output pressure and flow generated by these versatile pumps can be infinitely varied by simply adjusting the air drive pressure and flow rate.
Boosters can either be supplied individually or mounted within metal frames in a Power Pack form, complete with all air controls, inlet gas filter, output pressure gauge and pressure release valve.
Options include pressure isolation valves, onboard pressure recorders and wheels to provide mobility.
|
|
The model HIHPG3-20147 Package is a two-stage unit that
can boost 100 PSI Shop Air up to 4500 PSI and also be
powered by shop air. The advantage is no dependence on
nitrogen cylinders. Disadvantages are considerably slower
fill speeds (Even with a 10 H.P. air compressor), and the need
to Chemically Dry the air to -50f dewpoint or better before
being boosted.
|
|
Advantages:
- Working pressures up to 1,250 bar / 18.000 psi .
- Low noice level even at high cycling speed.
- No mechanical pilot valves.
- Proven reliability under severe conditions.
- Modular, robust and modern design.
- Easy to change ratio of the booster.
- Easy to convert a booster from single- to double acting.
- Light weight air cycling spool.
- Easy maintenance.
WE ARE LOOKING FOR A DISTRIBUTOR IN ITALY. Please contact us if you are interested!
|
|
|
Air driven amplifiers are used to bring shopair pressure to a higher level. Compression ratios of 1:2, 1:4 or even higher are possible. Amplifiers can be built as a system or with a reservoir. Applications are increasing cylinderforce, pressurising shopair locally and saving the lifetime of your compressor by reducing your maximum pressure.
|
|
|
|
|
|
HAA31 Models
Single-acting, single-stage air pressure amplifiers
3 models with ratios of (2.5:1), (3.5:1) & (4.5:1)
Maximum inlet pressure of 125 psi
Maximum outlet pressures from 320 psi to 600 psi
AA Models
Single-acting, single-stage air pressure amplifiers
3 models with ratios of (8:1), (15:1) & (30:1)
Maximum inlet pressures from 1,250 psi to 4,500 psi
Maximum outlet pressures from 2,500 psi to 4,500 psi
AAD Models
Double-acting, single-stage air pressure amplifier provides outlet flow on each stroke of cycle and gains "lift" from inlet pressure
4 models with ratios of (2:1), (5:1), (15:1) & (30:1)
Maximum inlet pressures from 300 psi to 4,500 psi
Maximum outlet pressures from 300 psi to 5,000 psi
AAT Models
Two-stage air pressure amplifier provides two high pressure pistons of different ratios within a single unit for maximum efficiency at higher outlet pressures
3 models with ratios of (7/30), (15/30) & (30/50)
Maximum inlet pressures from 300 psi to 3,000 psi
Maximum outlet pressures from 4,500 psi to 5,000 psi
|
|
FEATURES - BENEFITS - APPLICATIONS
- Compact: installs off the floor, out of the way, in any position.
- 2 connections: plant air in, amplified air out. (Pilot air connection is ptional for start-stop control with a PCV valve or solenoid valve and pressure switch).
- Can replace a dedicated air compressor: 10 HP size in a typical large plant spot requirement for 100 PSI when only 80 PSI is available. (Model 5A-DS-2)
- Replace bottled nitrogen: up to 700 PSI for air testing, lab or production. (Model 5A-DS-5)
TYPICAL APPLICATIONS FOR HIGHER AIR PRESSURE
- Valve actuators
- Air starters
- Bin vibrators
- Pneumatic drill motors
- Air clamps
- Air brakes
- Off road tires
- Pneumatic nailers,staplers, straping machines
- Air/oil hoists
- Air presses
|
|
The A series, with capacity ranges from 37 to 2037 m3/h, provides both high performance and flexibility for medium-ranged industrial applications.
Complying with the majority of international regulations for environmental safety and ergonimics, the A series ensures considerable energy savings, low noise levels, and easy, trouble-free operation at a reduced life cycle cost.
|
|
|
|
|
|
Elliott Axial Compressors
Efficient, reliable compressors for high flow, low pressure applications
Over the course of more than 40 years, Elliott has designed and built thousands of high-efficiency axial compressors. Elliott axial compressors are ideally suited for high flow, low pressure applications including fluid catalytic cracker service, air separation, blast furnaces, wind tunnels and synthetic fuel processes.
The efficiency and reliability of Elliott’s axial compressors is the result of rigorous, state-of-the-art engineering and testing. We use controlled diffusion technology for rotor blade airfoil designs, resulting in maximum efficiency across a wide operating range for substantial energy savings. We ensure long blade life and reliability through extensive use of Goodman and Campbell diagrams, finite element analysis, strain gauging and laboratory frequency tests. With computerized rotor dynamics programs, we analyze the complete lateral and torsional responses of each axial rotor and rotor support system.
Highly efficient and highly reliable, Elliott axial compressors provide significant savings in energy and operating costs.
|
|
Axial Compressor
Axial compressors attain volume flows of 70,000 to 1,400,000 m/h and a maximum outlet pressure of 20 bar.
They demonstrate their high level of efficiency in a variety of applications such as:
* Air separation plants
* Ammonia plants
* Blast furnace blower
* Wind tunnels
* Coking plants
* Nitric acid plants
* Fluid Catalytic Cracking (FCC) plants
* Gas liquefaction plants.
|
|
The VARIAIR Central System (VACS) from Becker provides a compact solution for supplying air to one or more production systems. This method of supplying suction and blast air supply is employed in a wide range of different places.
|
|
|
Cost-effective air compressors are widely used in automotive, chemical, pharmaceutical, mining and air separation industries. The major components of each H-Series compressor package, the aerodynamic section, interstage coolers, integral gearing, lubrication system and operating controls have been engineered to deliver reliable performance.
|
|
The ELGI- Samsung Centrifugal Air Compressors bring into India the world's acknowledged Turbo master to meet all requirements of oil-free compressed air.
The power of the Turbo Master ranges from 400 HP to 1500 HP. It's capacity ranges from 1400 cfm to 8500 cfm and pressure from 3 to 14 bar.
|
|
Available in four standard frame sizes, our multi-stage barrel compressors provide the oil and gas industry with natural gas gathering, re-injection, lift, depletion, storage/withdrawal and re-pressurisation solutions.
Barrel compressors are the preferred choice for high heads of pressure and low flow rates experienced in these applications.
Rolls-Royce uses advanced techniques to analyse each compression project to select the most flexible and efficient frame and rotor combination. For optimum performance predictability and production economy, each barrel frame size is based on families of standard stage components.
|
|
Turbomaster Centrifugal Compressors
Halocarbons, hydrocarbons:
- 4 casing diameters, 8 standard impeller diameters
- Volume capacity of 400-26,000 acfm (680-44,000 m3/hr)
- 1-8 stages for broad range of head
Pre-rotation Vanes:
- Ensures accurate capacity and head control
Drives suitable for your existing power source:
- Steam, electric, natural gas and diesel
Yorkflex coupling:
- Designed to minimize the transmission of vibration, requires no lubrication or maintenance
Quill-type Drive Shaft:
- Retains torsional flexibility even when sized to transmit large horsepower
Shaft-mounted Main Oil Pump:
- Requires no driver; provides positive coast-down protection with no run-down tank
Lube and Seal Oil System:
- Factory packaged on compressor skid to eliminate field piping and save space
|
|
Atlas Copco integrally geared centrifugal compressors Series and direct driven compressors Series are designed to conform to the latest editions of applicable API standards. Each unit is a custom combination of standardised components tailored to meet project requirements. Provided below is a short listing of standard features and common options:
|
|
|
Cost-effective H-Series air compressors are widely used in automotive, chemical, pharmaceutical, mining and air separation industries. The major components of each H-Series compressor package, the aerodynamic section, interstage coolers, integral gearing, lubrication system and operating controls have been engineered to deliver reliable performance.
|
|
It is a unique combination, meeting customer requirements for low installation, operating and maintenance costs with high dependability and ease of use.
No other turbo equals its efficiency and economy and no other is supplied as complete. ZH oil-free turbo power: your guarantee for a consistent and highly reliable air supply carrying the quality label -Atlas Copco.
|
|
Compressors
Centrifugal Compressor
MAN Turbos product range includes a variety of centrifugal compressors. Centrifugal compressors are extremely robust machines that can be built for the compression of various gases.
The casing design determines whether the compressors are categorised as horizontally or vertically split, each type having different attributes and application limits. The advantages and disadvantages of each and the feasibility of using a particular compressor should be considered with regard to the application in question. The specialists at MAN Turbo will be happy to assist you in this.
Centrifugal compressors are used in a wide range of industries. MAN Turbo offers specific solutions tailored to the customer specification for various applications:
* Oil and gas industry (up-, mid- and downstream)
* Air separation plants
* Chemical industries & Petrochemicals
* Iron & steel, mining
* Paper industry.
|
|
|
|
|
|
C-KLR ZEPHYR
Volume flow: 80 - 140 m/h
Overpressure: +1.0 bar
Vacuum: -0.6 bar
With the innovative, dry-running C-KLR ZEPHYR multi-claw range from Elmo Rietschle, pressure and vacuum can be combined in a single claw stage. All operation points on pressure and suction side work almost independently from each other. The C-KLR ZEPHYR operates economically and highly efficiently thanks to the patented triplelobe design with intermediate charging of air. This new design reduces pulsation in the pipes connected to the pump, and keeps the noise level low. An integrated cooling system for compressed air allows operation in applications, where compressed air
temperatures are of importance.
Advantages:
- High efficiency, dry and frictionless compression
- Low maintenance
- Integrated air cooling without additional cooling medium
- Suitable for multiple applications
This series is also available as vacuum pump (C-VLR ZEPHYR) and compressor (C-DLR ZEPHYR).
Typical Applications:
Printing & Paper, Chemical, Environmental, Packaging, Pneumatic Conveying, Woodworking
|
|
The Mink rotary claw pumps were developed especially for use in industrial applications where constant vacuum or pressure is required, along with totally oil free compression. Mink vacuum pumps or blowers are used in all applications, which require oil-free vacuum or oil-free compressed air.
The Mink is available as a single-stage or two-stage vacuum pump.
Features
* Non-contact operation
* No maintenance
* High efficiency
* Many different sizes and models
* Speed control (option) ATEX certified (option)
* Version for oxygen delivery
Application
Ideal for use in various industries such as Plastics, Printing and Paper, Food, Beverage, Wood, Pneumatic Conveying, Brick Making, Adsorption and Degassing, Environmental Technology, Metallurgy, Remediation and many more.
|
|
|
|
Other compressors
